User's Manual

ManualsBrandsShenzhen Hangshi Technology ManualsComputers & AccessoriesBluetooth Keyboard

Multi-Function Keyboard with Touchpad

for Surface go

User Manual

Package Contents

1. Bluetooth Keyboard with touchpad

2. Micro-USB charging cable

3. User Manual

Product Overview

更换成实际图片

①Power on/off: Press 1.5s to turn on; Re-press 3s to turn off.

②Bluetooth pairing: Press “ Fn + ” keys together for connecting.

Backlit of keyboard guide

1. Lighting ON/OFF Key.

Press first time is turning on the light.

Press second time is increasing brightness.

Press third time is lighting off.

2. + / to change the backlit colors. ( 7-color backlit )

Summary of content (5 pages)

PAGE 1
Multi-Function Keyboard with Touchpad for Surface go User Manual Package Contents 1. Bluetooth Keyboard with touchpad 2. Micro-USB charging cable 3. User Manual Product Overview 更换成实际图片 ①Power on/off: Press 1.5s to turn on; Re-press ②Bluetooth pairing: Press “ Fn + 3s to turn off. ” keys together for connecting. Backlit of keyboard guide 1. Lighting ON/OFF Key. Press first time is turning on the light. Press second time is increasing brightness. Press third time is lighting off. 2.
PAGE 2
3. When the battery is less than 20%, the backlit will be turnt off. 4. The backlit won’t work until the keyboard paired with your tablet. Specifications Bluetooth Specification Touchpad Bluetooth 3.
PAGE 3
The blue Bluetooth indicator will start to rapidly flash. 3. Go to your “Settings” screen on your tablet with Bluetooth –enabled device, activate its Bluetooth function and search for the keyboard device. 4. “Bluetooth 3.0 Keyboard” should appear. 5. Select “Bluetooth 3.0 Keyboard” on your tablet and the keyboard will now be paired. The Bluetooth indicator will be off. SPECIAL NOTE: 1. Please get it charged before first usage. 2. Only one device can be actively paired at one time. 3.
PAGE 4
press any key and wait for 3 seconds. Charge it 1. Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard. (USB charger is not included) 2. In charging, the power indicator will turn red. Generally, it takes approximately 4 hours for a full charge. Troubleshooting If you are unable to connect the keyboard to your tablet, please try the following: 1. Starting with a full charge on both devices ensures that process won’t be interrupted by a low battery. 2.
PAGE 5
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction.