User's Manual

90*100mm
三蓝牙能同时连接，按Fn+ / / 自由切换，零延迟。台式机没有
自带有蓝牙功能的，要配个蓝牙适配器才能使用。
三蓝牙通道
非常感谢您使用本公司为您提供的键盘，在使用本产品前请详细阅读本
手册。
一款使用HID协议的蓝牙裝置，可以作为iOS、Android、Windows系统
设备的输入裝置。
通道1指示灯
通道3指示灯
通道2指示灯
产品展示
双面彩印 , 折页，105G铜版纸
1. 键盘采用全金属外壳设计，使用高强度铝合金材质，表面采用砂面氧化
处理，外形时尚美观，高端大气；
2. 支持3通道蓝牙同时连接，但一次只能使用一个通道的设备，使用另一个
设备时，要切换通道才能使用。
3. 键盘键帽凹弧面设计，改善触摸手感，大R角设计加大了视觉效果。
4. 键盘为iOS、Android、Windows三系统通用，兼容性强。
产品特点
1 2 3
工作电压
可持续工作时长
睡眠电流
锂电池容量
按键寿命
连接有效距离
充电电流
回连时长
是否输入连接配对
3.1V~4.2V
≥80小时
≤0.1mAh
≥250mAh
≥300万次
≤10m
≤250mAh
≥3秒
NO
工作电流
低电压报警
待机时长
锂电池寿命
按键力度
充电接口选用
充电时长
唤醒时长
工作温度
≤3mA
3.0~3.1V
≥100天
≥300次循环
50g~80g
MICRO
≤2小时
≤5秒
-10℃~+55℃
节能休眠模式
如30分钟内没有任何操作，键盘将会自动进入休眠模式，再次使用时，只
需按任意键后等待≤5秒，键盘就会启动。键盘开机3分钟未配对，将停止
配对，需再次按配对键再次配对。
键盘参数
①
②
为了获得更长的电池使用寿命，键盘电源灯闪烁时才给键盘充电。
在工作状态下充电必须使用原装电源线，如使用其他数据线在工作过程
中充电可能会出现乱码和功能故障。
保养贴士
警告：不遵循以下安全说明可能会导致起火、触电、损坏键盘设备
危险（高度危险要警惕）
注意（轻微危险要关注）
远离利器
远离类似微波辐射源
禁止重物挤压
禁止冲击、弯曲键盘
远离油类、化学或者其他有机溶剂
警告（中度危险要警惕）
X
X
X
X
安全需知
低电压状态时，三个通道指示灯同时蓝色闪烁，这时要给键盘充电：
①
②
③
充电方法
连接原装USB线的B端到键盘充电接口
连接原装USB线的A端到电源适配器或者是电脑的USB接口
充电时通道3指示灯红色长亮，直到电池饱和，指示灯熄灭。
第一步. 打开键盘电源开关，三个通道指示灯同时蓝色长亮3秒，然后熄灭;
第二步. 按下FN+ 对码功能键，对应通道指示灯(蓝色)将会闪烁;
第三步. 打开平板电脑的蓝牙并搜索，平板电脑自行或手动搜索找到键盘
名称（B.O.W），点击连接;
第四步. 将会显示已成功连接，键盘对应通道指示灯长亮。
多媒体功能键默认都为单键实现；按下Fn锁定状态下，单按实现F1-F12。
iOS
(蓝牙系统)
返回
亮度减
亮度加
搜索
主页面
无功能
无功能
上一曲
播放/暂停
下一曲
静音
音量减
音量加
F1-F12锁定
对码功能
电量显示
通道切换
分享
设备
设置
返回
亮度减
亮度加
搜索
主页面
任务窗
返回
上一曲
播放/暂停
下一曲
静音
音量减
音量加
F1-F12锁定
对码功能
电量显示
通道切换
分享
设备
设置
Esc
亮度减
亮度加
搜索
浏览器
菜单
菜单
上一曲
播放/暂停
下一曲
静音
音量减
音量加
F1-F12锁定
对码功能
电量显示
通道切换
分享
设备
设置
按键图标
Android
(蓝牙系统)
Windows平板
(蓝牙系统)
蓝牙键盘配对连接步骤
功能键使用说明
指示灯说明
开机状态;通道指示灯
对码状态;通道指示灯
已连接状态;通道指示灯
低电压状态;通道指示灯
充电状态;通道3指示灯
蓝色
蓝色
蓝色
蓝色
红色
三个通道指示灯同时蓝色长亮3秒
对应通道指示灯同时蓝色1秒5闪（180秒）
对应通道指示灯蓝色长亮
三个通道指示灯同时蓝色闪烁
长亮（直至电池饱和）
键盘状态
指示灯
颜色
指示灯状态
三个通道指示灯同时蓝色闪烁0.5秒
闪烁一次为25%，二次50%,三次
75%，四次满电
电量指示;通道指示灯 蓝色
铝合金三通道蓝牙键盘
地址： 深圳市宝安区沙井街道西部工业园 航世科技园
网址： www.bow.cn
航世产品技术交流群： 211705564
全国服务热线： 400 682 8008
使用说明书
HB186-3
Fn+
Fn+
Fn+
it can be connected with three Bluetooth pairings at same time, and pressing
FN+ to change Bluetooth channel freedom with no delay. Desktop PC
which with no Bluetooth settings , it should be with one dongle to using.
Three Bluetooth pairings
Thank you for using BOW keyboard, please read manual carefully before using.
One kind of Bluetooth settings with HID, support windows, Android and IOS
systems as inputting equipment.
Channel 1 indicator channel 3 indicator
channel 2 indicator
keyboard layout
Keyboard characteristic
1 2 3
Working voltage
Keeping working time
Sleeping current
Battery
Key life
Working distance
Charging current
Re-connection
Inputting password
3.0V-4.2V
≥80 hours
≤0.1mA
≥250 mAh
≤3 million times
≤10meters
250mA
≥3S
NO
working current
Low power warning
standby time
battery life
pressing force
charging port
charging time
reworking time
working temperature
≤3mA
≤3.0-3.1V
≥100days
50g-80g
MICRO Port
≤2hours
≤5S
-10°- +55°
Saving energy module
Keyboard Specification
pressing the FN lock key to use F1-f12 shortcut function
iOS
（Bluetooth system） （Bluetooth system） （Bluetooth system）
Return
Lightness -
Lightness+
Searching
Home
NO function
No function
Last
Play/Pause
Next
Mute
Volume -
Volume+
F1-F12 LOCK
Pairing
Battery state
Pair channel
Share
Equipment
Settings
Return
Lightness -
Lightness+
Searching
Home
task
return
Last
Play/Pause
Next
Mute
Volume -
Volume+
F1-F12 LOCK
Pairing
Battery state
Pair channel
Share
Equipment
Settings
Return
Lightness -
Lightness+
Searching
Browser
menu
menu
Last
Play/Pause
Next
Mute
Volume -
Volume+
F1-F12 LOCK
Pairing
Battery state
Pair channel
Share
Equipment
Settings
Key caps
printing
Android Windows
Bluetooth Pairing steps
Shortcut key
Indicator
Power on sate: pairing indicator
Pairing state : pairing indicator
Connected state ;pairing indicator
Low power state: pairing indicator
Charging state ;pairing 3 indicator
Blue
Blue
Blue
Blue
Red
three pairings keeping light 3S
the pairings indicator flicker five times every second(within 180S)
pairing indicator light Blue all time
three pairing indicator flicker blue at same time
keeping light until full of power
Keyboard state
color
indicator state
all of three indicator flicker one time within 0.5 second, means
25% power, two times means 50% power, three times means
75% power, four times means 100% power.
Battery indicator: pairing indicator Blue
User Manual
HB186-3
Fn+
Fn+
Fn+
1, this keyboard cover is made of metal, using high-hardness aluminium alloy, and
using sand finish oxidation, fashion and artistic shape, high-end and nice.
2, support three Bluetooth channel connect at same time, but just can work well one
channel one time. When using another equipment, you should change the channel.
3, the key-caps with design concave surface, changed the touching felling, and the
Big R degree increase the visual effect.
4, the keyboard support Windows, Android and IOS system, high compatibility.
First: turn on keyboard and all of three indicator will keep light 3 seconds
and then extinguished.
Second：pressing FN+ pairing key，the corresponding pairing
indicator will flicker blue color
Third: turn on Bluetooth settings of tablet and then searching, the tablet PC
will show B.O.W pairing name, clicking it and connected
Fourth； when connected succeed, the indicator will be on all the time.
it will be sleeping module when it do not has been any touched within 30
minutes, but it will be reworking when you press any key and waiting 5
second; Keyboard will stop pairing when keyboard has not pairing
succeed after 3 minutes later , and it need pressing FN+pairing again to
pairing.
times circulation
≥ 300
Charging
Tip
Safety Caution
Warning: it can cause fire, electric shock, damage of keyboard
system if disobey the safety notes.
Dangerous (be careful of highly dangerous )
1)Keep the keyboard away from sharp objects.
2)Do not Microwave the keyboard.
3) Do not place heavy object on the keyboard.
4) Do not force or distorted the keyboard.
5) Keep away from oil, chemical or any other organic liquid.
Caution (slight dangerous should be noted)
Warning (be careful of mid dangerous)
Shenzhen Hangshi Technology Co.,Ltd.
ADD: Hangshi Technology Park, G Area, Democracy West
Industry park Shajing Baoan District Shenzhen China
Web: www.bow.cn
QQ group about exchange of skills: 211705564
Nationwide service volume line: 400-682-8008
When the battery power is low, all of three Bluetooth channel indicator will
be on at same time and flicker, its time to charge.
1. Connect the B port of the origin USB wire to the keyboard charging port,
2. Connect the A port to the power port or the electric USB port.
3. When charging , the third channel will be red color until at the end of charging.
1. To make the battery much more lift time, it should be charged when the
low power indicator light.
2. When you are using the keyboard and charging at same time, please
use the original USB wire, if the keyboard is used others USB wire to
charge , maybe it be mistakes within working.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.