Operation Instruction

Instructions
Open the mobile APP to set personal information
And switch to the device page. Click add device
Search and match to connect to your device
Binding is completed
Bluetooth Connection Watch Charging and Activation Watch Operation Instruction Introduction to Watch Functions Introduction to Watch Functions Introduction to Watch Functions Introduction to Watch Functions Introduction to Watch Functions
Sports Modes
Watch Charging and Activation
Scan the qr code below to download and install the app client
Shenzhen Haikangsheng Intelligent Co., Ltd
Please scan code and download APP
GloryFit APP
Charging the device to active before the frist time using; To
charge you device,plug the charging cable into adapter or USB
port on your computer.
1. Open the mobile location service and GloryFit APP location
The upper left icon is gray, which
means the watch is not
connected and occupied
The upper left icon is white,
which means the watch has
been connected and occupied.
2. Open GloryFit APP→Device→Add device→Search for Bluetooth
and link
※ Do not connect Bluetooth via the background of phone,Need be
sure Via APP search Bluetooth and link. If do wrong operation will
cause the Bluetooth of the watch to be occupied, the GloryFit APP will
not be able to search for the Bluetooth. At this time, the Bluetooth in
the Phone’s background must be ignored and released.Then Go back
to the GloryFit APP to search an connect.
Swipe right from the
first screen
Menu interface
Swipe right from the
first screen
notification
Swipe left from the
first screen
Activity data
Swipe down from the
first screen
Shortcut page display
up to 24 can be displayed. The watch will
synchronously display the corresponding
data such as heart rate, heat and speed
allocation of movement when the movement
is started. You can also pause or stop the
movement.
Sports Record
The sports ring tracks and records your steps,
distance, and calories.
Sleep Statistics
Enable sleep detection through the APP to
automatically record sleep data, including
total sleep time, deep sleep and light sleep
time. More detailed information analysis and
data records can be viewed in the APP.
Heart rate, blood pressure, oxygen
Through the watch, the heart rate, blood
pressure, blood oxygen value can be
independently detected and their data can be
synchronized to the APP.
Weather Information
The weather page displays current weather,
air quality information, minimum and
maximum temperatures, and slide one page
to preview the weather over the next three
days.
Push message
The watch can accept notifications displayed
on the mobile phone, open the
corresponding social applications that need
to be pushed through the APP, and the watch
information page can store multiple message
records.
Play Music
The watch can control music, switch the last
and next song, play or pause music, and
control volume.
Flashlight
Click to enter, the entire interface will turn
white.
Look for mobile phone
Click on the icon of look for mobile phone to
call a mobile phone.
Stopwatch
You can time, start or reset stopwatch.
Timer
The timer can set the time, start timing, or
reset.
Settings
Watch settings can be used to change the
dial, adjust the brightness, view watch
information, shut down, restart and restore
the factory.
Phone reminder
Goal accomplished
The target number of steps can be customized
on the APP. If the total number of steps for the
day exceeds the target number of steps, the
watch will remind you
After the device and the APP are connected, if
the phone calls, the watch will have a call
reminder interface.
Sedentary reminder
Enable the sedentary reminder through the
mobile APP. You can set the reminder period,
and the watch will remind you to get up and
move on time.
Introduction to Watch Functions Introduction to Watch Functions
1.Using in Wet Conditions
2.Using Quick View
Your device is water-resistant, which means it is rain-proof and
splash-proof and can stand up to even the sweatiest workout.
NOTE: Do not swim with your Smart Bracelet. We also don't
recommend showering with your wristband; though the water
won't hurt the device, wearing it 24/7 does not give your skin
a chance to breathe. Whenever you get your bracelet wet, dry
it thoroughly before putting it back on.
With Quick View you can check the time or the message form
your phone on your Smart Bracelet without taping. Just turn
your wrist towards you and the time screen will appear for a
few seconds.
1.Environmental Conditions
2.Size
Operating temperature: 14℉ to 122℉ (-10℃ to 50℃)
Non-operating temperature: -4℉ to 140℉ (-20℃ to 60℃)
Fits a wrist between 5.5 and 7.7 inches in circumference.
3.Disposal and Recycling
Please kindly be aware that it is the consumer’s responsibility
to properly dispose and recycle Smart Bracelet and accompanying
components. Do not dispose of Smart Bracelet with common
household waste, the Smart Bracelet unit is considered electronic
waste and should be disposed of at your local electronic
equipment collection facility.
For more information, please contact your local electronic
equipment waste management authority or the retailer where
you bought the product.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Slide down the watch timetable panel to display the shortcut page,
click to enter the settings, and then click the about icon to display
the watch’s MAC address. You can determine your device by listing
the watch’s MAC address on the device;
After the watch is bound successfully, it will automatically connect
with the mobile phone in the future, and the data can be refreshed
synchronously by drop-down in the APP data page;
04.
Introduction to Watch Functions
Alarm reminder
Low battery
When the watch has a low battery, the watch
will show a low battery reminder.
Through the APP, you can add and set the
alarm time, synchronize the watch to display
the alarm time, and turn the alarm on or off.