Installation Instructions

Ar
eas of application:
Remote control switches,alarm systems, , remote control door locks, remote control electric
shutter doors and Windows, water pump control, industrial control products, etc.;
technical parameters:
Working voltage: DC3V
Working frequency: 433.92 MHz
Standby current: 0MA
Working current: > 20MA
Encoding Type: learning code EV1527)
Transmission distance: > 10 m (open area sensitivity more than 103 dBm)
Output power: 10 m (0 DBM);
Transfer rate: < 10 KBPS
Modulation mode: ASK (amplitude modulation)
Working temperature: - 10 ~ + 50
Size:30 * 60 * 12 mm
* Tips: 1. This series of remote wireless remote control with 1/2/3/4key optional;
2.With the power switch, remote control can turn off the power save electricity
when not
in use.
FCCStatement:
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing
twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevice
mustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired
operation.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturning
theequipmentoffandon,the
userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna.
Increasetheseparationbetweentheequipmentandreceiver.
Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected.
Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Caution:Anychangesormodificationsnotexpresslyapprovedbythepartyresponsible
forcompliancecouldvoidtheuser'sauthoritytooperatetheequipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.Thistransmittermustnotbecolocatedoroperatinginconjunctionwithanyother
antennaortransmitter.

Summary of content (2 pages)