Instruction Manual

1. Short press the TIMER button once, the 15-minutes indicator lights up denoted the
timer is set to 15 minutes
2. Short press the TIMER button twice, the 30-minute indicator lights up denoted the
timer is set to 30-minutes.
3. Short press the TIMER button three times, the 60-minute indicator lights up denote
the timer is set to 60-minyes.
4. Short the TIMER button again to turn off the timer function. To turn off the timer
function completely, short press the TIMER button till all indicators are turned off.
5. The timing function is only valid for natural sound and Bluetooth.
WanYin UVC Sanitizer with Wireless
Charger and Sound Machine
Power Adaptor
WanYin UVC Sanitizer with Wireless
Charger and Sound Machine
Instruction Manual
UVC Sanitizer/Sound Machine/Wireless Charger/Night Light/Alarm Clock
Model Number: GP-A289
Shenzhen Great Power Innovation and Technology Enterprise Co., Ltd. (the
"Company") warrants to the original retail purchaser of this product or any part
thereof, under normal use and conditions, be proven defective in materials or
workmanship within one year from the date of original purchase, such defect(s) will
be repaired or replaced with new or reconditioned products (at Company’s option)
without charge for parts and repair labor. To obtain repair or replacement within the
terms of the warranty, the product should be delivered with proof of warranty
coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to
the company. For the details of after-sales support and return address, please call the
customer service: 0755-21671965.
Any action for breach or any warranty hereunder, including any implied warranty,
must be brought within a period 12 months from the date original purchase. In no
case shall, the company be liable for any consequential or incidental damages
whatsoever. No person or representatives is authorized to assume for the Company
and liability other than expressed herein in connection with the sale of this product.
Manufacturer: Shenzhen Great Power Innovation and Technology Enterprise Co., Ltd.
Manufacturer Address: No. 331, No. 335, Guiyue Road, Dafu Community, Guanlan
Street, Longhua District,
Shenzhen
Distributor: Shenzhen Tianxingtai Optronics Technology Co., Ltd.
Customer Service Tel: [phone]
2. Standard clean cycle (around 10 minutes): Press the “UV” button once to start
standard sanitization cycle. The UV indicator on cover turns on red during sanitization
and a number “10” appears on the clock display denote the sanitization time is 10
minutes. The UV indicator turns off when the sanitization is completed.
3. Deep clean cycle (around 20 minutes): Press and hold the “UV” button until the UV
indictor on the cover flashes twice. The UV indicator on cover turns on red during
sanitization and a number “10” appears on the clock display denote the sanitization
time is 10 minutes. The UV indicator turns off when the sanitization is completed.
4. To stop sanitization before the cycle is complete: Press the UV button. The UV indictor
on the cover flashes three times to indicate the cycle has stopped and it’s safe to open
the cover.
1. Open the cover of the
clock/sanitizer. Then place
the item you want to sanitize
inside. Close the cover and
choose the sanitization cycle
you want to use.
Notes:
1. Please remove the protective film by following the direction shows on the label.
2. The UV indicator flashes if the cover is open when you try to start sanitization. For your
safety, the sanitizer cannot proceed with sanitization if the cover is open. Make sure the
cover is completely closed, then press the UV button again.
3. You can use deep clean cycle even for items that don’t need it. There’s no harm done
to the item ‒ it just takes longer to finish the cycle.
520x400mm 折后：130*200mm
Instruction manualCertificate/Warranty Card
Remove all items from the packaging and keep the packaging;
if you need to dispose of it, please follow local regulations.
The clock has a pre-installed battery backup that
will keep the time in case power is interrupted
(like by a power outage, for example). To activate
this back-up function, simple pull out the insulator
from the battery compartment in the sanitizer
compartment. If you notice that battery backup is
no longer working (the battery indicator turns on),
simply replace the CR2032 coin-cell battery behind
the circular battery door. Use a coin to open the door
and access the CR2032 battery.
1.
2.
3.
5.
6.
4.
Press & hold the button on the top of the clock/sanitizer until the hours digits flash.
Use the VOL/SET + & - buttons on the top of the clock/sanitizer to adjust the hour.
After hour is set, press the button until the minutes digits flash.
Use the VOL/SET + & - buttons to adjust the minutes.
After minutes is set, press the VOL/SET + & - buttons to choose 12-hour (AM/PM) or
24-hour (12-hour time is the default.).
The clock default mode is 12 hours system with AM mode and PM mode.
Warranty
Product Feature
1. Press and hold the button in the top if the clock/sanitizer until the hour digits flash
on the display.
2. Use the + and ‒ button on the top of the clock/sanitizer to adjust the hour.
3. Press the button once, the minute digit flash on the display.
4. Use the + and ‒ button on the top of the clock/sanitizer to adjust the minute. After the
minute is set, press the button once to select the alarm sound, press the +/- button to
select either nature sound or buzzer alarm sound (the default alarm sound is nature
sound). If nature sound alarm sound is selected, press the MUSIC button to select the
nature sound and the number of nature sound will be shown on the display.
5. Follow the short press AL1 key to enter the alarm volume setting mode, short press the
+/- key to set the alarm volume.
6. Follow the short press AL1 key to exit and save the current settings, or do not operate
for 20 seconds to automatically exit and save the current settings.
Remarks: To set the time for alarm 2: follow the step above, using the “闹铃2” button
instead of ”闹铃1” button.
蓝牙
顽音消毒盒GP-A289
1. When the alarm sounds, press the SNOOZE/PLAY-Pause bar temporarily delays the
alarm another 9 minutes until you turn it off.
2. This bar also adjusts the display brightness when the device is normal time mode.
There is 3 level of brightness in the sequence of low-mid-high.
3. In Bluetooth audio mode, this bar plays or pauses playback.
Short press on the night light button to turn on the light and setup the
brightness: ”Low—Middle—High”.
1. Place your wireless charging-compatible device directly on the center of the top cover.
2. The indicator light turns red while your device is charging. This indicator turns green
when your device is fully charge. For some mobile device (Apple iPhone) doesn’t has the
capability to generate full charge sign, the indicator will not turn to green but the device
itself will stop the charging when it is fully charge. Your device screen displays the
charging progress.
1. Short press the button, display will show “SPA” for 3s and the display light will light up, then
enter the natural sound mode with the default music of “Wind”.
2. Short press the button in turn to select the natural sound music in the following order:
3. Wind > Rain > Brook > Ocean > Campfire > White Noise, the music can play recyclable.
4. The display will show the music sequence number for 3s when select the music.
5.Long press with 2s to turn off the music, the display will show “OFF” for 3s and the music light
will turn off.
6. Short press the music button and Bluetooth button to switch between Natural Sound and
Bluetooth function.
● 10W Fast Wireless Charge ● Clock, Time Memory
● 2 Alarm Clock Mode ● CR2032 Time Memory Battery
● UVC LED light Wave Length 270~280nm ● AC-DC Adapter: DC9V
● Dual channel stereo Bluetooth playback, built-in 6 sets white noise and natural music.
About the UV sterilization
Ultraviolet (UV) light is invisible to the human eye. UVC part of the ultraviolet spectrum has
been proved to have bactericidal effect, killing bacteria and viruses. Use the appropriate
safety measures for the use of this product and follow the safety precautions.
Ultraviolet radiation on porous parts or objects that are resistant to ultraviolet light has the
opportunity to reduce the effect of disinfection, as they create many shadows that may
prevent UV rays from hitting surfaces. Ultraviolet rays kill only the bacteria that hit the
surface.
Z
Z
1. Short press the button to open the Bluetooth function and enter the automatic back
connect mode for 10s, the Bluetooth light will slow flash; Without back connection after
10s, the Bluetooth light will fast flash and enter the pairing mode; Pairing and connect-
ing successfully, the Bluetooth light will flash up and voice “Connected”.
2. Fast double press the button to enter the pairing mode; Long press the button to turn
off the Bluetooth function.
3. Turn on the Bluetooth again, it connects to the last paired phone automatically.
4. The Bluetooth connected prompt tone is “connected”; the prompt tone of our of
range, turn off Bluetooth of device and re-pairing mode is “disconnected”.
5. Disconnected with 15 minutes and without re-connected or Pairing successfully, the
Bluetooth will turn off:
a: When the device is out of range, voice “disconnected” , the product is on re-pairing
mode and Bluetooth light will slow flash for 5 minute.
b: After 5 minute, the product will enter pairing mode, Bluetooth light will fast flash
and turn off after 15 minutes without pairing.
6. Turn on the Bluetooth and without pairing or connection with device, Bluetooth will
turn off automatically; Pairing or connection successfully and without any audio
playing, Bluetooth will turn off automatically.
7. Restore Bluetooth factory Settings: on the Bluetooth turn off mode, long press the “ ”
button with 10s, the display will shows “clr” which means the setting is successfully.
000-0000000
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.