Instruction Manual

ManualsBrandsShenzhen Great Power Innovation And Technology ManualsAudio EquipmentFairytale summer night firefly light bluetooth speaker

Philyra

INSTRUCTION MANUAL

Model: A20030

Fairytale summer night firefly light bluetooth speaker

Firefly

BUTTON OVERVIEW

POWER/BT Button

Alarm Button

Timer Button

Time Button

Music Button

Light Button

VOL- Button

VOL+ Button

Time On/Off Button

Display

INSTRUCTIONS

Power/BT Button

1. Press and hold the POWER / BT button for 2 seconds to

turn on the device (with Bluetooth activated by default) .

The indicator light will blink when enter pairing mode.

2. To turn the device off hold the POWER / BT button for 5

second. The device, Bluetooth, voice playback and night

lights will be turned off at the same time.

3. Double-click the POWER / BT button to Exit connection.

Back to pairing mode and the blue indicator light will start

to blink quickly.

4. While in voice mode, short press to return to the

Bluetooth status

5. To turn off the bluetooth, hold the POWER / BT button

for 2 second.

NOTE: TIME display time is automatically adjusted to dim

level if there is no operation in 5 minutes

VOL+ Button

1. Short press to increase volume by 1 level (total 16

levels), long press VOL+ to increase volume quickly,

display will show the volume level when adjusting the

volume.

VOL- Button

1. Short press to decrease volume by 1 level (total 16

levels), long press VOL- to decrease volume quickly,

display will show the volume level when adjusting the

volume.

Music Button

1. When unit is on, short press the SOUND button to switch to

next sounds, the music symbol on the screen will lights up

accordingly (The volume changes to level 2 in about 3

seconds).

Press the music button once to change the sounds in order of :

10. Whitenoise

11. Brahms Lullaby

12. Twinkle Twinkle Little Star

13. Moonlight Sonata

14. Schubert Serenade

15. Edelwiss

16. Red River Valley

17. Meditation from Thais

18. Mozart's Lullaby

1. Summer night

2. Brook

3. Wind

4. Ocean

5. Rain

6. RainForest

7. Campfire

8. Thunderstorm

9. Heartbeat

2. When playing sounds, long press SOUND button for 2

seconds to turn off sound.

Light Button

1. When unit is on, short press the Light button to change light

modes. Press and hold the Light button for 2 seconds to turn

off/on the lights including firefly, moon and stars.

2. When in off mode, Press the light button for 2 second to turn

on firefly mode.

Timer Button

1. When unit is on, short press the TIMER button to set timer to

15/ 30/ 45/ 60 minutes or off.

Alarm Button

1. Short Press Alarm button to turn on/off alarm and display will show the alarm sign.

2. Long press the ALARM button to set alarm time, minutes flash and can be adjusted via

pressing VOL +/VOL- button.

3. With minutes set then short press ALARM button to switch hours and hours will flash according-

ly, short press VOL +/VOL - button to set hours, then short press the ALARM button to select the

alarm sound among beep and 18 built-in sounds via short pressing VOL + / VOL-, the display

show -bb, -01 ~ -18 accordingly, do not operate after sound selected for 10 seconds, alarm will

set and come back to time display.

as shown in figure below：

3. When alarm is ringing. Press any button to enter 5-minute snooze time (can snooze Max. 3

times), Press and hold the ALARM button for 2 seconds to turn off alarm.

4. After turn off the alarm button. If need to reset this alarm, press the alarm button and the alarm

sign will turn on. then you can enter the last alarm set time.

18:00

Long press the ALARM

button to set alarm time

short press the ALARM

button to select the alarm

sound among beep and 18

built-in sounds

With minutes set then

short press ALARM button

to switch hours

minutes flash adjusted via pressing VOL

+/VOL- button

18:00

18:0 1

short pressing VOL + /

VOL-

short press VOL +/VOL -

button to set hours

19:00

1. Summer night

2. Brook

3. Wind

. . .

the display show -bb, -01

~ -18 accordingly

-0 1

18:00

The seconds time need to

reset to "0" after

confirmation

Alarm sound setting process (selection display)

-03-02

12:00 -0 1

- 14- 15- 18 - 17 - 16

-04-05-08 -07 -06

- 13- 12

-09

- 10 - 1 1

Time Button

1. Press and hold TIME button for 2 seconds to start setting time,

the minutes flash indicating it adjustable, short press VOL +/VOL-

button to increase/decrease minutes.

2. With minutes set, press TIME button to set hours, the hours

flash and can be adjusted via VOL +/VOL- button.

3. After hours set press TIME button again to finish time setting.

4. When the LCD display Time mode, short press the TIME button

to change your screen brightness (high/low).

Time On/Off Button

1. The time display can be activated or deactivated by pressing the

TIME ON/OFF button.

VOL+/VOL- Button

1. Press and hold the VOL + button / VOL- button simultaneously

for 5 seconds will reset unit to factory mode, the TIMER indicators

15, 30, 45, 60 will light up and flash for 5 seconds indicate reset

successfully.

Note: The product will shut down when battery voltage is lower than 3.3V.

Type-C (BACK)

1. Plug the Type-C cable with the Power adapter on your device, and then connect to

your power source.

BLUETOOTH

1. Enable Bluetooth on youir smartphone or other device (if it isn’t already enabled).

Choose “Philyra Firefly” from the list of pairing options on your smartphone. (If it’s not in the

list, choose “SCAN” from your phone’s Bluetooth menu.)

The device gives an audio signal when it’s finished pairing and connecting to your smartphone.

The indicator turns solid blue.

Bluetooth Wireless Connection Tips

● Make sure the Bluetooth capability of your device is turned on.

● The Bluetooth wireless connection works up to a range of roughly 33 feet (10meters).

This range may vary, however, based on other factors, such as rom layout, wall material,

obstacles, your device’s Bluetooth performance, etc. If you’re having problems connect-

ing to this speaker, move closed to it.

● If your device asks you for a password to connect, use “0000”.

● Ensure that the volume of the Bluetooth device is turned to the maximum (or at least

75%).

● 5.0蓝牙播放音乐

● 电子LED时钟

● 15/30/45/60分钟睡眠定时

FEATURES

● built-in 3.7V 2200mAh lithium battery

● 18 sounds

● LED Alarm clock

● Bluetooth5.0 with Built-in Speaker

● Electronic LED clock

● 15/30/45/60 Sleep Timer

CAUTION

This device was tested for typical body-worn operations. To comply with RF exposure

requirements, a minimum separation distance of 5mm must be maintained between the user’s

body and the handset, including the antenna. Third-party belt-clips, holsters, and similar

accessories used by this device should not contain any metallic components. Body-worn

accessories that do not meet these requirements may not comply with RF exposure require-

ments and should be avoided. Use only the supplied or an approved antenna.

This device in compliance with the essential requirements and other relevant provisions of

Directive 2014/53/EU. All essential radio test suites have been carried out.

1. Use careful with the earphone maybe possible excessive sound pressure from

earphones and headphones can cause hearing loss.

2. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

3.The product shall only be connected to a USB interface of version USB 2.0

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that

this device does not cause harmful interference (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be

installed and operated with minimum distance between 20cm the radiator your body: Use only

the supplied antenna.

FCC ID: ZY9-A20030

IC Caution:

- English:

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause interfer-

ence, and (2) This device must accept any interference, including interference that may cause

undesired operation of the device.

- French:

Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le

brouillageest susceptible d'encompromettre le fonctionnement.

12 MONTH LIMITED WARRANTY

Shenzhen Tianxingtai Optronics Technology Co., Ltd. (the “Company”) warrants to the

original retail purchaser of this product that should this product or any part thereof,

under normal use and conditions, be proven defective in material or workmanship within

12 months from the date of original purchase, such defect(s) will be repaired or

replaced with new or reconditioned product (at the Company’s option) without charge

for parts and repair labor. To obtain repair or replacement within the terms of the

warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill

of sale), specification of defect(s), transportation prepaid, to an approved warranty

station. For the return address, please scan the QR code on the product or packaging.

This Warranty is not transferable and does not cover product purchased, serviced or

used outside the United States or Canada. The warranty does not extend to the

elimination of externally generated static, noise, or loss of range or audio/ video quality

due to external factors, to costs incurred for the installation, removal or reinstallation of

the product, or to damage to digital media devices or memory. The warranty does not

apply to any product or part thereof which, in the opinion of the company, has suffered

or been damaged through alteration, improper installation, mishandling, misuse,

neglect, accident or exposure to moisture. This warranty does not apply to damage

caused by an AC adapter not provided with the product or by removal or defacement of

factory serial number/barcode labels.

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMIT-

ED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT,

SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY

PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities.

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED

TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WAR-

RANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE

BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL

PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSE-

QUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.

No person or representative is authorized to assume for the Company any liability other

than expressed herein in connection with the sale of this product. Some states/provinc-

es do not allow limitations on how long an implied warranty lasts or the exclusion or

limitation of incidental or consequential damage so the above limitations or exclusions

may not apply to you. This Warranty gives you specific legal rights and you may also

have other rights which vary from state/province to state/province.

Manufacturer: Shenzhen Great Power Innovation And Technology Enterprise Co.,Ltd

Manufacturer Address: No. 331, No. 335, Guiyue Road, Dafu Community, Guanlan Street,

Longhua District, Shenzhen

Distribution：Shenzhen Tianxingtai Optronics Technology Co., Ltd.

Tel：86-0755-21671965

BT:2402-2480MHz Max Power:-2.64dBm.