User's Guide

1 2 3
Installation
Step 1: Attach magnetic bracket stickers to the flat wall surface where the
product needs to be installed (Figure 1);
Step 2: Drill screw holes at corresponding positions on the magnetic bracket
stickers (Figure 2);
Step 3: Knock wall plugs into the holes (Figure 3);
Step 4: Drive screws into the wall plugs (Figure 4);
Step 5: Hang the magnetic bracket on the finished screws (Figure 5);
Step 6: Attract camera to the magnetic bracket to finish installation (Figure 6).
4 5 6 7
APP Installation and Registration
4. Tap to open the app, and register and log in;
5. Insert the WiFi station into socket, install battery and power the camera
on. After the power is turned on, you can operate according to reminders on
the APP (Note: If the LED indicator flashes in red and blue alternately 1 minute
after the WiFi station is energized, it indicates the camera has been powered up
and prompt sound will be heard at the same time).
Android APP download IOS APP download
100% installation with no need of cables; robust magnetic base ensures no
complicated construction and cost, completely DIY;
1920*1080P HD preview and event recording, 140° extra large viewing angle,
and excellent night vision;
Equipped with high-precision human body sensor, detection distance can
be flexibly set, and the self-sensing alarm bell can shock and scare
uninvited visits away;
With IP65 dust and water proof rating and transmission distance of up to 320
feet, it has no fear of wind and rain whether on an outdoor wall or a tree;
Removable high-performance lithium battery with ultra-low power design
enables a long endurance of up to 1 year, with no need of frequent charge
(standby duration depends on the installation environment)
Built-in speaker and high sensitivity microphone allow you to talk to your
family and visitors on your mobile phone anytime and anywhere.
Standard WiFi station: Effectively extend the camera transmission distance,
and provide video and image storage with no fear of being stolen (TF card is
not contained), as well as sound and light alarm to remind of intrusion
Suggestion
To ensure battery life, avoid frequent use of real-time video viewing, and turn
off PIR detection alarm when it is installed in places with high traffic.
Features
Technical Specifications
WiFi (2.4GHz)
100M (330 ft)
1/2.7-inch CMOS
WIFI transmission distance
Image sensor
Items Specs
2 million pixels
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
TRF exposure warning :
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
This device is acting as slave and operating in the 2.4 GHz (2412~2462 MHZ) band.
Ad Hoc function is supported but not able to operate on non-US frequencies.
Do not use the device with the environment which below minimum -30 ℃ or
maximum over 50℃ .
Hereby, we declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
Notice: Observe the national local regulations in the location where the device
is to be used. This device may be restricted for use in some or all member
states of the European Union (EU).
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
Power supply
Camera pixel
Built-in lithium battery、external 5V DC
Angle of view
Remote viewing Support Android 4.44 and IOS 9.0 x 64
Storage method
WiFi station TF card storage - 32GB MAX/
cloud storage (need to be paid)
Installation method Magnetic bracket + 1/4 threaded holes
IP Rating
*
All of above parameters are subject to change without prior notice. The company
reserves all final interpretation rights.
Operating temperature
Storage temperature
Operating humidity
Wireless transmission method
-20
o
C~60
o
C
15%~85% RH
-10
o
C~40
o
C
140
o
diagonal
IP65
正面
反面
类似此位置的黑线为折线无需印出
Such middle black line is a folding line with no need to be printed.
(Figure 1) (Figure 2) (Figure 3)
(Figure 4) (Figure 5) (Figure 6)
FCC Certification Info
EU Environmental Protection
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
Attentions
1. It is recommended to match the device in room first;
2. Do not install the product in a place that is not strong or easy to fall;
3. When not in use for a long time, please turn the camera off and remove the
battery in it;
4. Do not touch the camera and WiFi station with wet hands or wet items to
avoid electric shock;
5. If the products or parameters in the manual do not conform to the actual
product, please refer to the actual product, and we reserve all final
interpretation rights.
Camera WiFi station Battery
Power adapter
Magnetic bracket Bracket sticker
USB cable User guide
Wall plugs Screws
Packing List
Appearance
Press and hold
simultaneously
for 5s to achieve
factory reset
Press and hold for
5s to add camera
Press and hold for
5s to carry out AP
network configuration
Indicator
TF card slot
Microphone
SYNC/ON/OFF
Lens
light sensor
Indicator
Infrared sensing
area
Battery compartment
Micro USB port
Model: 5200ZB
Prior to use of this product, please read this guide carefully to avoid
any damage caused by error operation or improper use.
User Guide
1080P WiFi Smart Home
Monitoring System
Model: 5200ZB
Prior to use of this product, please read this guide carefully to avoid
any damage caused by error operation or improper use.
User Guide
1080P Battery Powered
Wireless Smart Security Camera
1. 2.4G wireless router is required；
2. Support Android 5.0 and above, iOS 9.0 and above；
3.Download APP: Please select one of below two methods to download
the APP, then complete the installation and account registration，
A：Scan the QR code to download APP
B：The iOS client opens the App Store;
the Android client opens Google play and
searches for "GosBell", click to download
and install
Remark: The APP interface may be
upgraded and adjusted at any time,
subject to app as its actual basis
without prior notice