Model No.
Product structure Introduction Thank you for choosing our baby monitor. Please read the instruction carefully in case of product damage due to improper operation. 1 2 6 4 3 Parts in the package 5 + - 7 DC 5V 1.camera sensor 4.Indicator LED 2.Lens 5.SET 3.Microphone 6.Temperature sensor 7. DC power interface 09 ° 08 0~ 90 10 11 Camera Monitor 12 13 21 14 15 16 22 17 20 Power adapter x2 Power cable x2 Manual 08. Antenna 09. Menu button/Return 10. Power on/off button 11.
Icon Description Using the Monitor Status Bar Icon No signal connection between the receiver and the camera Place the Camera Unit in a convenient location (e.g. on a table or a shelf) and point the camera lens toward the area you want to monitor. Signal strength between the receiver and the camera The Lullaby function is enabled. 27 Displaying current room temperature Indicating current batter y level. When the batter y is too low, this icon will change to and flash.
Preparation before using camera 1. Powering the Camera Unit Preparation before using receiver 1.Power on the receiver (The receiver is provided with a lithium batter y, if the receiver has enough power, please go directly to the Step 2). + - DC 5V Insert one end of the included charging cable into the USB jack on the back of the camera. + - DC 5V - DC 5V - + + Insert one end of the charging cable into the USB charging jack on the side of the receiver.
Receiver function settings Functions of the Babysitter is user definable, to best satisfy your demands. Audio and temperature alarms may offer automatic notification to you. This chapter will introduce the user-definable settings item by item. Access receiver menu Camera settings (camera pairing and deletion) Add camera 1. Select In states of live view, press MENU button on the monitor can enter into MENU list; Icon and press OK to enter. 2.
5. When the device prompts “Pairing is Ok”, which indicates that the device is successfully paired, the menu will skip to the real-time monitoring menu, and the first indicator light of the receiver is constantly on in green. Audio alarm settings Set the range of the sound sensitivity alarm. Set the sound sensitivity alarm range. This function recognizes the intensity of the baby's crying, and when the value is above the threshold, the receiver will sound an alarm. 1.
Celsius setting Set to Celsius: Select Feeding timer °c and press OK to confirm. Temperature switch: Select You can set the receiver to auto feeding timer mode. This setting will automatica switch to sleep mode depending on the length of such setting. ON and press OK to confirm After setting, press MENU to return. 1. Select and press OK to enter the setting page. 2. Select the length of sleep as needed. Press OK to confirm.
Reset default settings Setting This setting includes time settings, factory reset and viewing hardware version. Time setting Format all settings on the receiver and delete the camera. 1. Select and press OK to enter the setting page. 2. Select and press OK to enter the setting page. Calibrate the time on the receiver. 1. Select and press OK to enter the setting page. 2. Select and press OK to enter the setting page. 3. At this time, the device will prompt “Restore to default settings?”.
Specifications Version information View the version information of the receiver Camera 1. Select and press OK to enter the setting page. 2. Select and press OK to enter . Rx: Rx Date: Tx: Tx Date: 3. The receiver will display corresponding version information. Press MENU to return after reviewing the version information.
CE and FCC Certification Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.