CONTENTS Welcome Welcome 02 Features Packing List 02 Structure Installation Operations 02 03 04 05 ● Basic operations 05 ● Video recording 07 ● Playback ● Delete Video 08 09 ● Video Output 09 System setting 10 ● Date / time 11 ● Language ● Record Mode 11 11 ● Format SD/USB 12 ● Storage for Recording 12 ● Display Items 12 ● TV System 13 ● System Information ● System Update 13 13 ● Scan Mode Period 13 ● Mute 14 ● Load Default 14 ● Brightness 14 14 ● Volume Record 15 ●
Installation Structure 1. Install the camera at the proper monitoring location. The camera can be installed in two modes: Antenna Infrared LEDs Lens PIR infrared sensor Microphone Antenna Socket Pair Button Link Indicator Power Indicator Bracket Power Input ① Upright installation: Install the camera on a level plane. ② Reverse installation: Install the camera in the celilng. 2. Install the receiver at a proper location.
Operations ● 5 . After successful pairing, the following real-time monitoring picture appears: Basic operations C2 V Picture display area 1. Connect the camera to the power supply. The power Indicator on the back is turned on: 2011/11/05/09:30 C3 Picture display area Picture display area 2011/11/05/09:30 C4 Picture display area Time stamp 6. Press the 2. Connect the receiver to the power supply.
● Video recording Manual Recording: 1. In the real-time monitoring status, press the and buttons to select the camera for video recording as the current camera. 2. Press the recording/stopping button on the device. The recording icon is displayed on the screen, indicating that recording starts. 3. Press the button on the device again to stop recording. Timer Recording: Set the recording start/stop time through the “Timer Recording” menu.
4. Press the or button to select video; 5. Press the OK button to playback: C2 System Setting In the real - time status, press the MENU button following interface: to enter the Picture display area V 2011/11/05/09:30 C3 Picture display area Picture display area 2011/11/05/09:30 C4 Picture display area 2011/11/05/09:30 2011/11/05/09:30 Press the / button to go backward/forward fast; press the OK button again to pause; press the MENU button to quit the play mode.
Press the or and buttons to select an option, and then press the OK button to confirm. ● Date / time Press the OK button to enter: ● Format SD/USB 1. Press the OK button to enter; 2. Press the or button to select “Cancel”, “SD Card” or “USB Device”; Cancel: Cancels formatting. SD Card: Formats the SD card. USB Device: Formats the USB device. 3. Press the OK button to format: Date / Time Format SD/USB Date / 2011 11 / 05 Formatting , please wait .....
● TV System ● Mute 1. Press the OK button to enter; 2. Press the or button to select; 1. Press the OK button to enter; 2. Press the or button to select “On” or “Off”; 3. Press the OK button again to confirm and exit. 3. Press OK button to confirm and exit. ● Load Default ● System Information 1. Press OK button to enter and view; 2. Press the MENU button to exit. 1. Press the OK button to enter; 2. Press the or button to select “Cancel” or “OK”; Cancel: Cancels restoration of default settings.
Record Playback 1. In the real-time status, press the MENU button to enter the following interface: 2. Press the or button to select “Record”; 3. Press the OK button to enter: For specific steps, see Page 08. Record Timer Recording PIR Recording OK:Options Camera MENU:Quit 1. In the real-time status, press the MENU button to enter the following interface: 2. Press the or button to select “Camera”; 3.
2. Press the or button to select camera; 3. Press the OK button to pair: Pairing ● Active 1. Press the to enter: or button to select “Active”, press the OK button Active Paired 0xe01f0008 Pairing ..... Camera -2 Paired 0xe01f0007 Long press the PAIR button on TX for 2 seconds Camera -3 Paired 0xe01f0006 52 Camera -4 Paired 0xe01f0005 Camera 1 OK:Options Camera -3 Camera -4 Camera 1 Off Camera 2 On Paired On Paired On Paired MENU:Quit OK:Options 4.
Specifications Base/PIP Setting Resolution Size Quality High Top Low High Low OK:Options MENU:Quit Camera Medium Press the or button to select “Resolution Size” or “Quality”; Press the or button to select “Top”, “High”, “Medium” or “Low”; Press the OK button to adjust; Press the MENU button to confirm and exit. Here, you can set whether to send an alarm automatically when any motion detected by the camera: 1. In the real-time status, press the “MENU” button to enter setting 2. 3. 4. 5.
FAQ 1. Why does not the screen display any monitoring picture after the camera is connected? Answer: 1. Please check whether “Active” is set to “ON”. 2. Please check whether pairing succeeds. 2. The recording time is set already or the human body sensing recording is enabled, but the receiver does not start recording when the time comes or a human body is sensed. Why? Answer: 1. Check whether the storage medium is inserted. 2. Check whether the storage medium is full.
IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.