User's Manual

Safety Information

In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be

installed and operated with minimum distance 20cm between the radiator and your body. Use only

with supplied antenna. Unauthorized antenna, modification, or attachments could damage the

transmitter and may violate FCC regulations.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

IEEE 802.11b/g operation of this product in the U.S.A. is firmware -limited to channels 1 through

11.

This device is intended only for OEM integrators under the following conditions:

The antenna must be installed such that 20 cm is maintained between the antenna and users, and

The transmitter module may not be co-located with any other transmitter or antenna.

As long as 2 conditions above are met, further transmitter test will not be required. However, the

OEM integrator is still responsible for testing their end-product for any additional compliance

requirements required with this module installed (for example, digital device emissions, PC

peripheral requirements, etc.).

PAGE 1
Safety Information In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b/g operation of this product in the U.S.A.