User's Manual

ManualsBrandsShenzhen Gongjin Electronics ManualsElectronicsWI-FI AP MODULE

RT2070 Quick Installation Guide

Wireless Local Area Network dual band USB Card

(For 802.11b/g Wireless Networks)

contents

1. Overview

1.1 Product Introduction

Thank you for choosing the RT2070 USB Adapter.

The adapter is designed to provide a high-speed and unrivaled wireless performance for your

computer. With a faster wireless connection, you can get a better Internet experience, such as

downloading, gaming, video streaming and so on.

The RT2070 USB Adapter supporting IEEE 802.11b/g 2.4GHz radio operation. The RT2070 ’s

auto-sensing capability allows high packet transfer rate of up to 54Mbps for maximum

throughput.Additionally, the RT2070 adapter has good capability on anti-jamming and supports

WEP,TKIP, AES，WPA and WPA2 encryption to prevent outside intrusion and protect your

personal information from being exposed.Featuring high performance transmission rates, simple

installation and adaptability, as well as strong security, the RT2070 USB Adapter is the perfect

solution for small office and home needs.

System Requirements

System configuration recommended is as follows:

= Windows XP/2000

= Standard USB 2.0 port

= 32MB system memory or larger

= 300MHz processor or higher

1.2 Package List

RT2070 product package contains the following items:

= 1x RT2070

= 1 x Quick Installation Guide

= 1 x UserMannual

2. Installation

This chapter mainly describes how to install RT2070 driver and Utility. The procedure is

illustrated by the example of Windows XP.

Summary of content (14 pages)

PAGE 1
RT2070 Quick Installation Guide Wireless Local Area Network dual band USB Card (For 802.11b/g Wireless Networks) contents 1. Overview 1.1 Product Introduction Thank you for choosing the RT2070 USB Adapter. The adapter is designed to provide a high-speed and unrivaled wireless performance for your computer. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming and so on. The RT2070 USB Adapter supporting IEEE 802.11b/g 2.
PAGE 2
.1 Installation Guide Step 1:find the setup file named ADD-RT2070 .exe, then double click ADD-RT2070 .exe to start the installation. then Figure 2-1-1 will appear. Figure 2-1-1 Preparing Setup Step 2: To continue, the following Figure 2-1-2 will appear within seconds. Click Next to continue.
PAGE 3
Figure 2-1-2 License Agreement Step 3: Then you’ll see the screen as follow, you can choose what to be installed.
PAGE 4
Figure 2-1-3 Setup Type Step 4: As next screen, you can select the configuration tool here. Figure 2-1-4 Setup Type i. If you want to install the Ralink WLAN Utility, please select the Ralink Configuration Tool and click Next. ii. If you only want to use the Microsoft Zero Configuration Tool to configure the wireless connection, please select Microsoft Zero Configuration Tool and click Next. Step 5: After that, you will see the next screen as below. Click Install to continue.
PAGE 5
Figure 2-1-5 Ready to Install the Program Step 6: The following screen for installing will appear.
PAGE 6
Figure 2-1-6 Setup Status Note: While files are copying, a warning box about Windows Logo testing may pop up, please click Continue Anyway button to continue the installation Step 7: After the files have been successfully copied, the screen in Figure 2-1-7 will appear. Click the Finish button to finish the wizard. Figure 2-1-7 InstallShield Wizard Complete After installing the driver successfully, you should see an icon (this icon might be different color) appear in your system tray. 2.
PAGE 7
Figure 2-2-1-1 Step 2:Then the follow interface shown as figure 2-2-1-2: figure 2-2-1-2 Step 3:Click on the Device Manager button, double-click Network Adapters, and then right-click 802.11 USB Wireless LAN Card USB Adapter. figure 2-2-1-3. Step 4: Click Uninstall shown in above figure 2-2-1-3, the system will uninstall the driver software of the adapter from your PC.
PAGE 8
figure 2-2-1-3 2.2.2 Uninstall the utility software from your PC Step 1: On the Windows taskbar, click the Start button, point to All programsèRalink Wireless,and then click Uninstall-RT7x.shown as figure 2-2-2-1 Figure 2-2-2-1 Step 2: Following the Install Shield Wizard to uninstall the utility software from your PC. 3. Configuration 3.1 Configuration of Utility RT2070 Wireless USB Adapter can be configured by its utility for Windows 2000, XP.
PAGE 9
Note: If your OS is Windows XP, you can use Windows XP to configure the wireless network settings.(To use this function, you must upgrade the OS with sp2). Is the Utility running? After the Adapter's driver and utility has been installed, the adapter’s tray icon will appear in your system tray. It means the utility is running on your system. If the utility does not run,you can run the utility by clicking: Start> All Programs> Ralink Wireless> Ralink Wireless Utility.
PAGE 10
Figure 3-1-1 Step 3:choose the one with SSID as test_123, and click Connect button.shown as figure 3-1-1 Step 4:then the follow interface will be shown, figure 3-1-2.
PAGE 11
The sign means connect test_123 success 3.2 Configure with Windows XP Wireless Zero Configuration Suppose there is a AP with SSID as test_123, Encryption is WEP, pre-shared key is:12345 Also suppose the utility is now running. Step 1:Right click the icon on the bottom of the desktop first and you will see Figure 3-2-1. Double click the Use Zero Configuration as Configuration utility option to enable Wireless Zero Configuration function.
PAGE 12
Figure 3-2-2 Note:If you have not installed SP2 for Windows XP, the step 2 above will not be available. Step 3: choose test_123 as figure 3-2-2, click Connect button. Step 4: input wep pre-shared key then continue. Step 5: If the connection is finished, the icon will display like the next screen shown.
PAGE 13
This device must not be co-located or operating in conjunction with any other antenna or transmitter NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 14
with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b/g operation of this product in the U.S.A. is firmware -limited to channels 1 through 11.