User's Manual

Table Of Contents

5 Network Settings

4. If want to forget a connected WIFI, select it and press the Right button on the remote control.

Then the interface shows up as below picture. Choose Forget button to forget this WIFI

information.

PAGE 1
5 Network Settings 4. If want to forget a connected WIFI, select it and press the Right button on the remote control. Then the interface shows up as below picture. Choose Forget button to forget this WIFI information.
PAGE 2
6 Video Settings 6.1 Available Video Interfaces 1. Connecting to TV through HDMI cable If the TV set has HDMI interface, the unit can be connected to the TV set with HDMI cable. After connecting, turn on the unit. the LED on the front panel is turned on, the screen shows boot logos and then enters the home screen after several seconds. 2.
PAGE 3
6 Video Settings 7.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.