Shenzhen Genrace Technology Co., Ltd. RFly-I160 UHF Integrated RFID Reader Hardware Guide http://www.genrace.com/enindex.
Shenzhen Genrace Technology Co., Ltd. Table of Contents CHAPTER 1 1.1 INTRODUCTION....................................................................................................................... 1 OVERVIEW.................................................................................................................................................. 1 1.2 TECHNICAL PARAMETER............................................................................................................................
Shenzhen Genrace Technology Co., Ltd. Chapter 1 Introduction RFly-I160 UHF Integrated RFID Reader Hardware Guide is used for RFly-I160. RFly-I160 UHF Integrated RFID Reader Hardware Guide has introduced the features, specifications, installation & connection. User can complete the UHF RFID test quickly. Please read this document and UHF RFID Demo Software User Manual to set up a UHF RFID demonstration platform.
Shenzhen Genrace Technology Co., Ltd. 1.2 Technical Parameter 1.2.1 Electrical Parameter Parameter Description Protocol EPC UHF Class1 Gen2, ISO 18000-6C RF Power 1dB Step, 5-30dBm Power consumption <10W (PWR OUT is unused) Operating Frequency 840MHz-960MHz. One of the following: China1, Europe, Korea, USA, China2, Japan. 902.75 MHz~927.
Shenzhen Genrace Technology Co., Ltd. 1.2.2 Physical Parameter Parameter Description Colour White; Silver Enclosure Aluminum +PC Dimension 129mm*129mm*53mm Weight 520g Tab. 1-2-2 Physical parameter Fig.1-2-1 Outline Drawing of RFly-I160 ( Unit:mm ) Fig.1-2-2 Outline Drawing of bracket ( Non-standard ) ( Unit:mm ) http://www.genrace.com/enindex.
Shenzhen Genrace Technology Co., Ltd. 1.2.3 Environmental Parameter Parameter Description Operating Temperature -30℃ ~ +60℃ Storage Temperature -30℃ ~ +85℃ Humidity 5-95%RH (Non-condensing) IP level IP54 Usage Indoor Tab.1-2-3 Environmental parameter 1.
Shenzhen Genrace Technology Co., Ltd. 1.3.1 Power supply Two ways of power supply. 12 VDC power supply. Recommended 12VDC/4A original power adapter. 100-240V~ 50/60Hz 1.5A 4 Fig.1-3-2 Diagram of adaptor power supply http://www.genrace.com/enindex.
Shenzhen Genrace Technology Co., Ltd. 1.3.2 Serial interface Fig.1-3-4 GX16-9 interface GX16-9 interface PIN NO. Function:Isolated RS232 ( RS485 Optional) PIN 1 SGND, Isolated Ground PIN 2 RS232TXD PIN 3 RS232RXD PIN 4 RFU ( Reserved for Future Use ) PIN 5 RFU PIN 6 485B ( Option ) PIN 7 485A ( Option ) PIN 8 RFU PIN 9 RFU Tab.1-3-1 PIN of GX16-9 interface 1.3.3 TCP/IP Network port RFly-I160 supports TCP/IP communication Fig.1-3-5 Diagram of network port http://www.genrace.
Shenzhen Genrace Technology Co., Ltd. TCP/IP Network Port PIN NO. Functions: TCP/IP Network Communication PIN 1 TX+ PIN 2 TX- PIN 3 RX+ PIN 4 POE V+ PIN 5 POE V+ PIN 6 RX- PIN 7 POE V- PIN 8 POE VTab.1-3-2 Network port pins 1.3.4 GPIO Interface RFly-I160 reader has 1 digital input and 1 digital output (Max.500mA) optically isolated GPIO interface. It can compatible with 5~24V level. Fig.1-3-6 GX12-7 interface Fig.1-3-7 GPIO schematic diagram http://www.genrace.com/enindex.
Shenzhen Genrace Technology Co., Ltd. GPIO Ports PIN NO. Definition Details PIN 1 OPT VCC 5 ~ 24V Optical isolation power input PIN 2 OPT GND Optical isolation ground PIN 3 GPO General purpose output port, compatible with 5 ~ 24V level. Low-level Max current is 500mA, but high-level output without this drive capability. PIN 4 GPI General purpose input port, compatible with 5 ~ 24V level. PIN 5 PWR OUT Power output :Output Voltage≈PWR voltage - 0.5V.
Shenzhen Genrace Technology Co., Ltd. 1.3.6 Buzzer indicator Buzzer Alarm tone Details Continuous ringing Device starts normally 2 short, 1 long Network error 2 short, 2 long RF module error 2 short, 1long; or 2 short 2 long Both network and module error Tab.1-3-4 Buzzer indicator Chapter 2 Installation and Connection 2.
Shenzhen Genrace Technology Co., Ltd. 2.2 Hardware Connection 2.2.1 Communication cable connection In order to improve the reliability of equipment connection, the serial port should be GX16-9 interface, and GPIO should be GX12-7 interface. In order to test convenience, device equipped with a 2-meter GX16-9 switch to DB9-F cable, or GX12-7 switch to cold-pressed terminal cable. Users can extend the cable by themselves according to the actual application. Reader’s support TCP/IP, RS232, RS485 (optional).
Shenzhen Genrace Technology Co., Ltd. Fig.2-3-2 Serial connection 2.3.2 TCP/IP connection RFly-I160 Reader supports one of the TCP Server and TCP Client network (default: TCP Server). User can search the network parameters in the LAN through “Network Set”, or set network parameters. Fig.2-3-3 IP parameters http://www.genrace.com/enindex.
Shenzhen Genrace Technology Co., Ltd. Before connecting, user sets the PC's IP address according to reader’s IP address, so that the PC and reader are in the same LAN segment. Besides, please confirm that the PC can PING reader. Fig.2-3-4 Internet parameters http://www.genrace.com/enindex.
Shenzhen Genrace Technology Co., Ltd. For example: If connect to “192.168.0.7”, just enter “192.168.0.7”, then open it. Shown as below. Fig.2-3-5 Network port connection A set of UHF RFID test and evaluation platform has been completed after the hardware and software connection. Users can use the Demo software to inventory, read and write. More details of Demo software,please refer to the UHF RFID Demo Software Manual. http://www.genrace.com/enindex.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.