AndroidȱTVȱBoxȱ 8VHU 0DQXDO Y 1. Preface Thank you buying this Android TV Box. Please read this manual thoroughly before operating the Android TV Box. Make sure the Android TV Box was not damaged in transit. Should the Android TV Box appear to be damaged, do not install it and contact your dealer. Check that you have all accessories according to the model. 2. Safety Precautions Preparation: Put the Android TV Box on a stable surface. Do not place any material on the Android TV Box.
4. Specification: Hardware decoding: Video: Mpeg2, H.264, VC-1 1080P Audio: Mp3, Wma, Ogg, Wave TV reception: DVBT, ATSC, ISDBT, DMB-Th (ATV2000 and ATV4000 only) CPU: ARM Contex A9, 800Mhz, 3D engine RAM: 256MB DDR2 Nano/Basic 512MB DDR2 Plus/Gold/Premium Flash Mem: 2GB Nano 4GB Basic 8GB Plus/Gold/Premium Power: 110-240, 1A / DC 5V 2A HDMI output: HDMI 1.3 5. Input&Output 5 USB 2.0, 2 external, 3 internal SDHC Slot HDMI 1.
Router manually, rather than DHCP protocol to obtain network setting from the network itself.(For details, please ask the administrator of the network) ĹSave. And then you can see two lights in LAN port, one is green, one is flashing yellow. ł.Applications Unknown sources: Allow installation of non-market application. Quick launch: Set keyboard shortcuts to launch applications. Manage applications: You can manager and remove installed applications.
Settings: Configure language, network, date and time .etc. Calculator: Calculation Clock: desktop clock Calendar 10. Icons on the upper right corner of the screen Cable network icon: if you don't connect network, there is no this icon. Wireless network icon: it shows the signal strength when it is working. System Time: Show the current system time. Home: Go back to main screen. Back: Go back to the last screen. Volume+/- System Menu/Properties 11.
If none of the buttons on the keyboard has been pressed, and the LED (16Hz) flickers quickly, it Means the power of the batteries is insufficient and you need to replace the batteries 2.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received,including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules.