Specifications

ManualsBrandsShenzhen Gaoyi Tech ManualsAutomotiveFast car wireless charger

Universal Wireless

Charging Car Mount

Type C input

How to use and wireless charging

Unscrew the mounting ring, insert the ball through the

mounting ring ,then position your preferred angle and tighten

the ring to secure the mount.

Specifications

•Input: DC 5V2A, 9V2.22A

•Output: DC 5V/1A, 7.5V/1A, 9V/1.12A, 9V/1.66A

(5W, 7.5W, 10W, 15W)

•Transmission distance：≤5mm

•Charging efficiency: 75% Max

Note

• Only for iPhone 13/12 Series (MagSafe Case Friendly):

iPhone 13 / iPhone 12, iPhone 13 Pro /iPhone 12 Pro,

iPhone 13 Pro Max / iPhone 12 Pro Max,iPhone 13 Mini /

iPhone 12 Mini

Note: Please use case with official MagSafe case or adaptive

metal ring.Not applicable to other phone cases!

•Works with all Qi-enabled phones: Smartphones, iPhone, Google

Pixel, Samsung Galaxy.

Note: Please use adaptive metal ring for your

Qi-enabled phones.

• Strong magnetic that can suction up your phone firmly without

sliding even through the bumps and turns road.

• Easy to Install & 360° Rotation.

• Fast heat dissipation, safe driving.

X13+G75

1m type-C charging cable

15W MAGNETIC WIRELESS

CAR CHARGER MOUNT

dashboard / windshield

mount

1 2

15mm

48mm

10mm

Please tear off the protective film before using.

Work MagSafe Compatible Devices

*Up to 7.5W wireless charging for iOS devices.

Compatible with official MagSafe case

or Magnetic case.

With Adaptive Metal Ring Applied to any Device.

*Up to 15W wireless charging for Android devices.

1 2

57mm

14.5mm14.5mm

Samsung Galaxy S21+

*QC3.0 Car Charger not included.

USB-A

Telescopic arm car dashboard holder base

1.After repeated use many times, if the gel sticker surface dirt

too much,and it can’t attached the device strongly,this gel

sticker can be cleaned by water and washing ,it can be

repeated use after cleaning and dry.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate

the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or

television reception,

which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of

the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. This equipment should be installed

and operated with a minimum distance of 20 cm between the radiator

and your body.

FCC ID：2A6IU-X13