Operating and Safety Instructions

ManualsBrandsShenzhen Ganghongtai Technology ManualsElectronics3charger

3charger

WIRELESS CHARGER AND STAND

Operating Manual

Congratulations on the purchase of your andi be free® 3charger. The 3charger

charges up to 3 devices simultaneously: wirelessly chargeable (qi- enabled)

smartphones, wirelessly chargeable (qi-enabled) earbuds and the Apple

Watch. The devices can be charged simultaneously or individually.

The operating manual contains important information on safety, use and

disposal of the device. Familiarize yourself thoroughly with all operating and

safety instructions before using the device.

Technical Specifications

The 3charger is designed to deliver up to a maximum power of 9 volts (V)

and 3 amps (A) when using a USB-PD compatible power supply. The charger

optimizes the delivered power to the smartphone dynamically. The delivered

power varies depending on various factors such as temperature and system

activity.

Summary of content (4 pages)

PAGE 1
3charger WIRELESS CHARGER AND STAND Operating Manual Congratulations on the purchase of your andi be free® 3charger. The 3charger charges up to 3 devices simultaneously: wirelessly chargeable (qi- enabled) smartphones, wirelessly chargeable (qi-enabled) earbuds and the Apple Watch. The devices can be charged simultaneously or individually. The operating manual contains important information on safety, use and disposal of the device.
PAGE 2
Power Supply Requirement The minimum power supply requirement is a QC2 (9V/2A) power supply. To get the maximum output, please use a QC3 (9V/3A) power supply. Output PD 23W USB C 3 W (Wireless Charger, Position 3) 15W (Wireless Charger, Position 1), qi-compatible 5W (Wireless Charger, Position 2), qi-compatible Package Contents • 3charger • USB to USB-C Cable • Operating Manual with safety instructions Quick Menu 1. Smartphone Holder 2. Earbuds space 3. Apple Watch space 4. USB-C connector 5.
PAGE 3
country specifications. To achieve maximum charging speed, a power supply of QC3 (9V/3A) is recommended. QC2 (9V/2A) is also possible but will not deliver full power. Your 3charger can now wirelessly charge your smartphone, Apple Watch and earbuds. Please also refer to the section ‚Using the 3charger‘. Using the 3charger After you have connected the 3charger correctly, you can start using it. • Charge your Apple Watch on the slightly indented upper charging surface (Position 3).
PAGE 4
Troubleshooting 3charger is not working, sttus indicator is not lit: • Insufficient or no power • The plugs or cables are damaged Smartphone does not charge: • Metal piece between charger and smartphone prevents charging. • Smartphone case is too thick (The smartphone will only charge over a distance of up to 4mm). FCC STATEMENT : This device complies with Part 15 of the FCC Rules.