User's Manual

Installation
Please read the instructions before using the product
There is one year guarantee for this product unless anthropogenic
factor.
Warranty
Packing List
3 in 1 Fast Wireless Charger
User Manual
Important notes
3 in 1 Fast Wireless Charger
User Manual
Type-c cable
Indicating status and protection function
1. LED blue light: Standby
2. LED green light: Charging
3. Blue light flashing: Mobile phone location in deviation or over
temperature protection or trigger FOD
* The involved images are sketch maps , the final product as per the material subjects.
1. Plug the power adapter into the socket.
2. USB cable connects the power adapter.
3. Put connects the USB-C Interface.
4. Put the mobile phone which supports wireless charging function
on the launch plate correctly. Indicator light changes to green
from blue if it starts to charge. The light will be blue if you remove
the mobile phone, which means the wireless charging pad enters
in a standby mode.
1. Please remove the protective case (except receiver case)
when charging, to keep high eciency. We suggest you use a 2A
adapter for the best results.
2. Do not disassemble the charger or throw it into fire and water,
to avoid causing a short circuit leakage.
3. Do not use wireless charger in severely hot, humid or corrosive
environments, to avoid circuit damage and occurs leakage
phenomenon.
4. Do not place stu with magnetic strip or chip (ID card, bank
cards, etc ) on wireless charging pad to avoid magnetic failure.
5. Please keep the distance at least 20cm between implantable
medical devices (pacemakers, implantable cochlear,etc.) and
the wireless charger, to avoid potential interference with the
medical device.
6. Please take care of the children and ensure they won't play
the wireless charger as a toy, to avoid unnecessary accidents.
7. It is better the mobile phones or other related machines don’t
set the vibration mode,as the vibration will cause deviation and
eect the charging experience .
8. Please read the manuals calfully before charging,this product
can not be ensured to be compatible with the functions of all
the machines.
65*90ＭＭ 128克铜板纸
Wireless charging
position for phones
Wireless charging
position for watch
Parameter specification
Model: HM29
Input voltage/current: 9V/2A
Mobile phone output: 15W(Max)
Earphone output: 5W(Max)
Watch output: 3W(Max)
Eciency: ≥75%
Product size: L118*W107*H160mm
Wireless charging position
for earphone
Power Adapter
USB-C Cable
USB-C Interface
Indicator light