User Manual

Installation
1. Plug the power adapter into the socket.
2. USB cable connects the power adapter.
3. Put connects the USB-C Interface.
4. Put the device which supports wireless charging function on
the launch plate correctly. Indicator light changes to green from
blue if it starts to charge. The light will be blue if you remove the
mobile phone, which means the wireless charging pad enters in a
standby mode.
Please read the instructions before using the product
Constant warm cup
with wireless charger
User Manual
For mobile phone:
1. LED blue light: Standby
2. LED green light: Charging
3. Blue light flashing: Mobile phone location in deviation or over
temperature protection or trigger FOD
For warm cup:
1. Green light breathing: the wireless charger is in thermal
insulation state
2. Blue light flashing: after the continuous heat preservation
working time is more than 4 hours, enter the power saving mode
* The involved images are sketch maps , the final product as per the material subjects.
Important notes
1. Please remove the protective case (except receiver case) when
charging, to keep high eciency. We suggest you use a 3A adapter for
the best results.
2. Do not disassemble the charger or throw it into fire and water, to
avoid causing a short circuit leakage.
3. Do not use wireless charger in severely hot, humid or corrosive
environments, to avoid circuit damage and occurs leakage
phenomenon.
4. Do not place stu with magnetic strip or chip (ID card, bank cards,
etc ) on wireless charging pad to avoid magnetic failure.
5. Please keep the distance at least 20cm between implantable
medical devices (pacemakers, implantable cochlear,etc.) and the
wireless charger, to avoid potential interference with the medical
device.
6. Please take care of the children and ensure they won't play the
wireless charger as a toy, to avoid unnecessary accidents.
7. It is better the mobile phones or other related machines don’t set the
vibration mode,as the vibration will cause deviation and eect the
charging experience .
8. Please read the manuals calfully before charging,this product can
not be ensured to be compatible with the functions of all the machines.
Warranty
There is one year guarantee for this product unless anthropogenic
factor.
Packing List
Constant warm cup with wireless charger
User Manual
Type-c Cable
使用产品前，请阅读使用说明
* 说明书涉及图片均为示意图，最终产品以实物为准
使用说明
1. 将电源适配器插在插座上。
2. USB 连接适配器。
3. 将 插入USB-C接口
4. 将带有无线充电功能的设备正确放在发射板上，指示灯由蓝色灯变为
绿色灯表示开始充电，移开设备指示灯变为蓝色灯，表示无线充电板进
入待机模式。
65*90ＭＭ 128克铜板纸
Parameter specification
Model: HC01
Input: 12V/1.5A
phone output: 15W Max
Warm cup: 18W Max
Eciency: ≥75%
无线充加热杯
用 户 手 册
手机充电系统工作时指示状态与保护功能：
LED蓝灯常亮：无线充电器处于待机模式
LED绿灯常亮：无线充电器处于充电模式
LED蓝灯闪烁：无线充电器位置放偏或者过温保护或触发FOD
保温杯系统工作时指示状态与保护功能：
LED绿灯呼吸：无线充电器处于保温工作状态
LED蓝灯闪烁：连续保温工作时间大于4小时后，进入省电模式
参数规格
产品型号：HC01
输入电压/电流 : 12V/1.5A
手机输出 : 15W Ｍax
杯子输出 : 18Ｗ Ｍax
充电效率 : ≥75%
注意事项
1. 充电时请取下保护套（不包括接收器外壳），以保持高效率;我们建
议使用3A适配器获得最佳效果。
2. 请不要在通电状态下自行拆解或投入火中、水中，避免短路漏电。
3. 请不要在严重高温，高潮湿或腐蚀性环境下使用，避免损坏电路出现
漏电。
4. 请不要将带有磁条或者芯片的磁卡（身份证、银行卡等）放置在充电
板上，避免造成磁卡失效。
5.请保持植入医疗设备（心脏起搏器、植入式耳蜗等）和无线充电器之
间距离至少20cm之间，避免对医疗器械的潜在干扰。
6.照管好儿童，以确保他们不会将无线充电器当成玩具，避免不必要的
事故。
7.最好不要将手机或其他相关设备设置为振动模式，因为振动会导致偏
差，影响充电体验
8.充电前请仔细阅读说明书，本产品不能保证与所有机器的功能兼容。
质保
该产品正常使用下保修一年，人为损坏不在保修范围内
包装清单
无线充加热杯
用户手册
Type-c线
保温杯
无线充
指示灯
Warm cup
wireless charger
Indicator light