User's Manual

USER MANUAL FOR FT12W09 IN WALL TRANSMITTER
I. Operation Instructions
1. Main power switch:
Trun on/turn off the wall controller power supply, push the switch button to “on”, then the wall controller and
ceiling controller can work.
2. Fan off:

When operating, press the key to stop the fan.

This key for the fan off only.
3. Speed of the fan (1~6 level):

Press the key ”1,2,3,4,5,6” to adjust the fan to designated speed level.

After press speed level Keys, the fan will enter the corresponding speed level from other speed level or idle.

Key “1” is the lowest speed, and key”6 “is the highest speed.
4. “ REV ” Direction of the fan

Press the key REV can change the running direction of the fan.
5. “O D “ Dimmer funcion enabled switch:
Release the screw then remove the top panel, push the switch to “o” can shut down the light adjust feature.
Light button can turn on and turn off the light only. When push the switch to “D” can open the light adjust feature, short
press the light button to turn on and turn off the light, long press the light button for brightness adjustment. (Remark: the
controller and the light should support brightness adjustment)
6. “LIGHT” Lighting control:
 LIGHT Light on or off.
 Long press for brightness adjustment (Initiate the brightness adjustment and the controller and the light should
support brightness adjustment)