User's Manual

USER MANUAL FOR FT1212A REMOTE CONTROL TRANSMITTER

I. Operation Instructions

1. Fan off



When operating, press the key to stop the fan.



This key for the fan off only.

2. Speed of the fan (1~6 level)



Press the key ”1,2,3,4,5,6” to turn on the fan to designated speed level.



After press speed level Keys, the fan will enter the corresponding speed level from other speed level or idle.



Key “1” is the lowest speed, and key”6 “is the highest speed.

3. Direction of the fan



Press the key can change the running direction of the fan.

5. The other optional functions as below:



Light on or off.



+ Turn up the brightness of the light.

PAGE 1
USER MANUAL FOR FT1212A REMOTE CONTROL TRANSMITTER I. Operation Instructions 1. Fan off  When operating, press the key  This key for the fan off only. to stop the fan. 2. Speed of the fan (1~6 level) Press the key ”1,2,3,4,5,6” to turn on the fan to designated speed level. After press speed level Keys, the fan will enter the corresponding speed level from other speed level or idle. Key “1” is the lowest speed, and key”6 “is the highest speed. 3.
PAGE 2
 _ Turn down the brightness of the light.  Adjust the color temperature of the light 6. The transmitter use 1pcs of 12V 23A battery, please install the battery correctly. II. Use precautions 1. When press the key of transmitter, the LED indicator doesn’t on, please inspect the battery installation. 2. When press the key of transmitter, the LED indicator flashing, that means the battery get low voltage, please replace a new one. 3.
PAGE 3
1. Cet appareil ne cause pas du brouillage nuisible. 2. Cet appareil peut subir de brouillage reçu, y compris l'interférence qui conduit à l'opération indésirable.