831 USER MANUAL Cloud Camera User Manual MODEL: 831 Note: To protect your privacy, please change the initial password after login. Please keep your user name and password safely.
831 USER MANUAL Contents 1. Introduction..................................................................................................................... 1 2. Installation....................................................................................................................... 1 2.1. Camera installation and Login ............................................................................. 1 2.2. Wireless Installation Considerations.........................................................
831 USER MANUAL 1. Introduction Thanks for buying our products. Cloud IP camera has a variety of functions, which dedicates to the office and home solutions. Unlike traditional IP Camera, cloud camera uses P2P technology, plug and play (no need to do port forwarding, DNS, or IP address setting). By using WIFI/3G remote monitoring ˈ Cloud Camera realizes real-time control at any where and any time. 720P HD makes image clear and smooth.
831 USER MANUAL Note: The user can click on the login screen of the "Register" button to register a user account, login to add / manage multiple cameras. 2: On the video viewing screen.
831 USER MANUAL Install video plug Note: If the image blurs when you watch, probably run the focal during transportations or human factors of the camera lens, the focal length of the lens caused by out of focus, the user can put the camera on the 3 meters for reference, swing the camera lens back and forth a few times till the image in best performance. 2.2.
831 USER MANUAL 3. Building Materials make a difference. Metal door or aluminum studs may weaken the wireless signal. The access points, wireless routers and other networking devices where the signal passes through drywall or not open doorways. Materials and objects such as glass, steel, metal, band insulator, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4.
31 USER MANUAL 2. Add Camera ID 1.
31 USER MANUAL 3. Enter Cloud IP Cam password and click add device. 4. Enter Cloud IP Cam password and click revise button.
831 USER MANUAL 5. After choosing Wi-Fi, enter the password and click apply. 6. Add IP Cam Successfully. Attention: 1. the 4th step is based on the Cam’s initial password, if the initial password is not “admin”, this step can be cancelled. 2. The 5th step, after choosing Wi-Fi and enter password, when applying, please check the STATE1 ( ) light flashing status. Before pulling the cable please make sure the STATE1 ( ) flash 3 times for every 3 seconds.
831 USER MANUAL 3.2 Camera status 1. You can see the online status of every camera you added, which can be divided into 3 statuses. • Green color indicates that your camera is online. • Yellow color means the camera online; however, password has been changed. You need to enter the new password to access the camera. • Red indicates the camera is offline and not able to access remotely. If the camera is offline, please try the following methods: • Make sure the camera's network connection is normal.
831 USER MANUAL 3.3 Account settings 1. Set video size: User can choose the resolution of the images. 2. Password: User can modify the admin account (The visitors login the account by administrator password can modify the information of the account). 3. Guest Password: The visitors who login the account by guest password can only watch and rotating screen, which can't modify the information of the account. 4. Exit: Exit Video Interface. 3.
831 USER MANUAL 1. Brightness / Contrast / Saturation / Sharpness: video images can adjust the parameters of the corresponding (Such as the right to adjust these parameters will result in poor image quality display we may not recommend users adjust of these parameters). 2. : Click "Reset", you can restore brightness / contrast / saturation / sharpness back to the factory settings. 3. 4. : IP CAM can control PTZ up / down / left / right rotation. : Display and hide the status bar icons. 5.
831 USER MANUAL 3.6 Button page 1. Video Play / Stop: Click buttons to play or stop the video. 2. Temporary manual recording button (the file recorded to micro SD card): Click the buttons on the audio / video recording, recording icon indicates .NOTE: This video button function applies only to temporary manually recording. 3. 4. Snapshot button: Click the button for playing video capture pictures.
831 USER MANUAL 12
831 USER MANUAL 4. Information 4.1 Alarm Information Checking 1. Information checking 2. Open the image 3.
831 USER MANUAL 5. Management This section shows the configuration of the IP Cam. 5.1 About Basic information about the camera is displayed. Model: The camera version number. Software Version: Camera current software version number. Plug-in version: watch current video cameras plug-in version number. Device ID: camera ID. 5.2 Nickname Modify the current camera name.
831 USER MANUAL Nickname: User can modify the name of the camera. 5.3 Admin Password Admin Password: Enter the current login password (default password is admin). New Password: Enter the new admin password. (To protect your privacy, please change the initial password after logging. Please keep the user name and password.) New Password confirmation: Re-enter the current camera modified login password.
831 USER MANUAL Click "Apply" to save your changes. 5.4 Guest Password Admin Password: Enter the administrator password of the current camera. Guest Password: Enter guest password (Default password is admin). New Password Confirmation: Re-enter the new guest password again. Click "Apply" to save your changes. 5.
831 USER MANUAL NIC: Ethernet (wired) or wireless networks. 1. Ethernet: Effective when connected to a wired network. Start Status: The current Ethernet situation is enable or disable. Mac Address: The current Ethernet Mac address. Automatically obtain an IP address (cameras default): When selected, the camera Automatically get to the router connected to it is automatically assigned to Its associated IP address / gateway / subnet mask information.
831 USER MANUAL By connected with hot spot can realize the WIFI P2P connections. A. Terminal: As an searched devices, can realize network Camera connected with WIFI router. Note: After setting up WIFI click Applications,, WIFI Surface does not immediately refresh the page information, Choose Client the user wants to quit "Network", and then enter, you can see no Line Choose router connection status display: After a successful connection, IP Address and gateway information will get to.
831 USER MANUAL 5.6 OSD Menu settings Display text: After tickled, the upper left corner of the screen will display the name of the camera. The user can modify the display name of the camera (Can not have Chinese or symbols, only English and numbers). Display date: After tickled, upper left corner of the screen will display the date. Date format: The user can select Year / Month / Day or Month / Day / Year two date formats.
831 USER MANUAL Display time: After tickled, the screen will display the time. Time format: User selectable for 24-hour or 12-hour format clock. Display week: After tickled, the screen will display weeks. Click “Apply” to save your changes. 5.7 SD card: Display Camera SD card status. . Format: The Micro SD (T-FLASH) card is formatted; the existing micro SD card contents will be cleared. Repair: If "Playback" cannot see video file or view the alarm information, can repair the micro SD card.
831 USER MANUAL 5.8 Camera alarm arming settings: Adjust the sensitivity Apply I / O Alarm input: When normally open, alarm input port connect with an external alarm sensor (such as door sensor, infrared, smoke alarm detector, etc.) must be a normally open alarm probes. When alarm occurs, the probe switch is closed; network cameras generate alarm triggers, alarm calls according to user settings.
831 USER MANUAL Choose motion Take photo I/O on/off Pre - recorded time Alarm on Apply 5.9 Scheduled recording: In this option you can choose the 7* 24 hour video or scheduled recording. Note: video files will be stored in SD card, when content is full, it will overridden.
831 USER MANUAL 5.10 Date / Time: Time Server address: Users can manually enter in the online search to fill the local country time zone server address (default time server address is China time). Sync data & time automatically: When Opening, the cam will automatically synchronize the time displayed on the address bar time server address with corresponding time. Time zone: Users can choose the time zone of the camera.
831 USER MANUAL 5.11 System: Online Upgrade: If you have the latest software, there will be tips click update, the camera will be online software upgrade, after the upgrade is successful will re-start the Camera. Restore the factory settings: The user can click the "Restore" button, will pop up on the right Diagram tips.
831 USER MANUAL 5.12 Other: Audio: Speaker: Set the size of the camera's speaker sound, use the mouse to drag the slider to set, the greater the value, the greater the sound from the speaker. Mac: Sets the camera microphone sensitivity, drag the slider with the mouse settings, the greater the value, the more sensitive the microphone receiving sound external environment more, the computer listens to the voice of the larger end, the corresponding listening to ambient noise is greater.
831 USER MANUAL 1). what is Remote Access? How to do that? Remote access means that you can access a camera from a web on any PC trough internet. So even if you are not at home, you can access a camera, view live video and manage its settings. How to do that? Please follow the Quick Installation Manual in the packing box. If your camera does not work, please check whether the following things are right. ....STATE2 ( ) on the camera flashes green 3 times every 3 seconds ....
831 USER MANUAL If there are multi-level routers, each should connect the other trough WAN (for example, the 1rs router LAN connects the 2nd router LAN by a network cable). If problem still exists, connect your camera with power, and then press “RESET” key on the bottom to restore to factory settings. 4). Why are there vertical white lines in image? CMOS sensor being exposed to strong light (such as direct exposure to sunlight or halogen light) may cause this problem. CMOS sensor is behind the lens.
831 USER MANUAL indicator) hardware failure, requiring repair. Wifi was disabled by 1. Press RESET for 5 seconds to the user or wifi restore the factory settings. hardware failure 2.Make camera with wired Ethernet STATE1/STA1 ( ) connection, after landing, in the (OFF "Manage" -> "Network" ,make WIFI enabled; 3. Camera hardware failure, requiring repair. WIFI router is trying 1. Verify WIFI router is good; to connect 2.
831 USER MANUAL 3. Try the camera placed from somewhere near WIFI router and then reconnect the power. 4. Check the router is turned on the firewall to do MAC address filtering. Green flashing 2 Internet traffic is 1. Restart the machine or the normal, is trying to machine on again to restart. communicate with the 2. Try running the camera, based cloud server on the press camera base RESET button hole 6 seconds, times set the camera to restore the factory tune.
831 USER MANUAL STATE2/STA2 ( ) (OFF Ethernet is disabled 1. Users press RESET 5 seconds to by the user or the restore the factory settings. network cable is not 2. Check \ replace the camera and connected connect the network cable between or Ethernet card the routers. 3. Camera hardware failure, requiring hardware failure repair. Network cable is 1. Please make sure your routers the IP DHCP server is enabled. connected, Red light 2. Try to restart the router.
831 USER MANUAL Normal Normal Green communication with light the cloud server, you flashing 3 times can access the camera via cloud services DHCP fails, use a References << >> Cloud Camera temporary IP address Quick Installation Guide. 192.168.187.254, Red \ Users can access the green same computer and lights webcam LAN, set flashing alternately different segments IP (192.168.187.xxx), and then access the camera through 192.168.187.254 7.
831 USER MANUAL Put the router / access point at the highest point of the room, so the signal can be distributed to whole room space. If you have a two-story house, you need to install a repeater to extend signal coverage. Eliminate interference Make sure home appliances such as cordless telephones, microwaves, and televisions are far from the router / access point, which helps reduce interface. Safety Prevent your next door neighbors or others connecting to your wireless network.
831 USER MANUAL To access a WEP network, you must know the key. Key is a code string. When using WEP, you must specify the level of encryption. Type of encryption determines the key length.128-bit encryption requires a longer key than 64-bit encryption. Key id defined by HEX (16 hex -0-9, AF) or ASCII (American Standard Code for Information Interchange - alphanumeric characters) format. ASCII format allows you to enter a string that is easy to remember. ASCII is converted into HEX when used on the internet.
831 USER MANUAL 9.Specifications Image sensor Image sensor 1/4 "color CMOS sensor Display resolution 1280 * 720 (720P) Lens CS 6mm Minimum 0.5Lux˄IR LED OFF˅ illumination Audio Video Input/output / Audio compression AAC(Advanced Audio Coding) Video compression H.
831 USER MANUAL Internet Wireless networks WiFi(IEEE802.
831 USER MANUAL Certification Weight About 500g Certificate RoHS,CE,FCC 36
FCC Statement˖ 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
