User's Manual

Phottix Strato transmitter Instructions

Short Description

*Consult your camera manual for specific settings for remote use.

this product uses efficient GFSK modulation, its frequency is 2.4 G, it fits free channels in many

countries.it adopts integration chip control.it has low power and super strong anti-jamming

capability;it can ensure the speed,distance and stability effectively.when used with the Canon and

Nikon professional flashes,it has TTL functions,and the range can be up to 100m.the Phottix Strato

transmitter can be used as a wired remote.the function of the test/shutter button is the same to the

cameras' shutter button:A half-press of the test/shutter button will autofocus, a full press will take

a photo.

2.Main parameter

Frequency: 2.464 GHz

Distance: 100m +

Channel: 4 channels

Batteries: 2 x AAA batteries

Max sync speed: 1/250 s

input voltage: 2.5-3.2V

Top ports:TTL port on the top of transmitter

dimension:85*40*38 (LWH)

Antenna: built-in PCB antenna

Operating temperature: -15—65 ℃

Storage temperature: -30—85 ℃

3.parts

1)Status LED

2)Test / Shutter Button

3)TTL Hot Shoe Port

4)Channel Selector Switch

5)Fire All Channels Switch

6)Locking Ring

7)PC input port

8)Camera Hot Shoe Connection

4.usage:

PAGE 1
Phottix Strato transmitter Instructions Short Description *Consult your camera manual for specific settings for remote use. this product uses efficient GFSK modulation, its frequency is 2.4 G, it fits free channels in many countries.it adopts integration chip control.it has low power and super strong anti-jamming capability;it can ensure the speed,distance and stability effectively.when used with the Canon and Nikon professional flashes,it has TTL functions,and the range can be up to 100m.
PAGE 2
Please note:Strato only can be used with compatible Canon and Nikon flashes. Status LED The Status LED on the front of the Phottix Strato transmitter will turn solid green when autofocusing (on camera or as a wireless remote) and turn red when sending a signal. Setting Channels Fire All Channels Switch To fire all flashes or strobes on different channels move the Fire All Channels Switch on the transmitter to the ON position.
PAGE 3
FCC ID: XBYSTRATO This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.