User's Manual

Wireless Flash Trigger User Manual

1. Prodcut Descripition

1) The transmitter of this wireless trigger works adopting wireless fip-flop radio

frequency, it has ALL channels, namely transmitter and receiver which use

advanced circuit can be used without coding. transmitter works with the

encoded radio frequency, its current is very low, the maximum trigger current is

1.2mA.it can trigger up to ten thousand times continuously with the extremely

low power and high anti-interference as it has multi-channel segregation

technology, users can match transmitter and receiver by their free choice, it

can be encoded to 4 codes, and can work independently in effective distance

range to adapt to the specific shooting environment.

2)Main function:

①wireless trigger synchronously

②synchronous flash trigger

③synchronous studio flash trigger

3) Product Features

① Wireless control, remote control

② Low Output, Energy Saving

③ Low Voltage Triggering, Harmless to Cameras

④ Advanced Channel Isolation, Operating Independently

2．parts name：

3. Specifications

Transmitter

1) Transmitter battery type: 23A 12V Mini Battery (internal)

Page 1 of 2

PAGE 1
Wireless Flash Trigger User Manual 1. Prodcut Descripition 1) The transmitter of this wireless trigger works adopting wireless fip-flop radio frequency, it has ALL channels, namely transmitter and receiver which use advanced circuit can be used without coding. transmitter works with the encoded radio frequency, its current is very low, the maximum trigger current is 1.2mA.
PAGE 2
) Off current: 0uA， maximum trigger current : 1.2mA 4. Operating Instructions 1)wireless trigger synchronously: ①Turn on the transmitter, switch to ON, then press the test button on it, if the indicator light blinks, that means it is working; ②install transmitter on the socket of the camera, transmitter will trigger signal through the camera's shutter release; ③transmitter can trigger receiver after encoding.