Quick Setup Guide

2 Physical Description
Quick Setup Guide
Security Tips
Package Contents
Power Adapter
IP Camera
Quick Setup Guide
3 Setting Up Your Camera:
Wired Connection via the Foscam
App
(Recommended)
Setting Up Your Foscam
Security Camera
1 Getting Started
To view this guide in other languages (e.g. Nederlands, Deutsch,
Français, Español), and for detailed manuals, tools, etc., please visit
foscam.com/downloads.
To ensure a smoother video experience on your smart phone, it is
recommended that your smart phone meet the following specications:
iOS: version 11 or higher.
Android: 4.1 or higher, using a device with a Graphics Processing
Unit (GPU).
Warning:
Quick Setup Guide
Before You Get Started
3. Make sure your smart phone is connected to the same WiFi network as
the camera.
5. After logging into Foscam APP, select “Tap to add a camera” or "+"
icon on the upper right corner, then select "Scan the QR code" and
scan the QR code labeled on the bottom of your camera.
Scan the QR code which
is located at the bottom
of your camera.
Tap + icon
Tap to add a camera
Add Device
<
Scan the QR code
Search in LAN
Manually add
Select ”Scan
the code”
Scan QR Code
<
Model: XXX
MAC ID:000000000000
Username(default):admin
Password(default):(blank)
DDNS:XXXXXX.
myfoscam.org
FCC ID:XXXXX
IC:12558A-XX
S/N:FIAI1403000001
UID:XXXXXXXXXXX
FHD Wireless IP Camera
Method A: Please wait for a few seconds, you can tap "Congure WiFi"
in "Congure WiFi" interface, then select your WiFi network and enter
your WiFi's password. After, you can set the camera name and tap
“Save” in the "Set name" interface.
Congure WiFi
Set name
Set name
Save
Camera added successfully
Please set the camera name:
My Camera
Select your WiFi
Network and enter
your WiFi's password
Camera added
successfully and
name has been set
4. Open the foscam APP and please register a Foscam account, or sign in if
you have one already.
6. There are two setup methods available that you can choose from, so
please pay attention carefully and follow either Method A or Method B.
Please change the camera's password regularly, using a combination
of numbers, letters and special characters.
We recommend that you regularly update your camera with the latest
available software and rmware to ensure the best experience with
your camera.
The cords on this product are a potential strangulation hazard. For child
safety, please keep these cords out of the reach of children.
Scan the QR code below to download and install the Foscam APP.
Wired Connection
Note: For the best experience, please update the APP to the latest version!
1. Connect the camera to your router with an Ethernet cable.
2. Plug the power adapter into the camera, and then wait for about 1
minute.
Micro SD Card Slot
Microphone
Spotlight
LED Indicator
Light Sensor
Reset
Spotlight
Speaker
Passive infrared
motion sensor
Support email: [e-mail]
FAQS
LAN
Power
Conrm
WiFi connection
4
WPSWPS
Router
Expansion Screws
V1.1
305503000601
Lens
Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks,
so you can choose the channel with the stronger signal to use.
For example, choose your SSID: XXXXX_2.4G or XXXXX_5G.
WiFi Settings
WiFi_1
WiFi_2
WiFi_3
WiFi_4
No WiFi Configuration
Select WiFi Network...
Note: It is strongly recommended that you choose to congure WiFi at
this step.
Foscam_1
Foscam_2
xxxxx_2.4G
xxxxx_5G
Configure WiFi
Configure WiFi
Method B: Please wait for a few seconds, you can tap "Congure WiFi"
in "Congure WiFi" interface, then you tap "Skip" in the "WiFi Settings"
interface. After, you can set the camera name and tap “Save” in the "Set
name" interface.
Configure WiFi
Configure WiFi
Congure WiFi
Set name
Set name
Save
Camera added successfully
Please set the camera name:
My Camera
Tap” Skip”
Camera added successfully
and name has been set
Skip
WiFi Settings
WiFi_1
WiFi_2
WiFi_3
WiFi_4
No WiFi Configuration
Select WiFi Network...
Skip
Ethernet Cable
Ethernet port
waterproof kit