User Manual HD Wireless IP Camera Model: FI9851P
Table of Contents 1 Overviews........................................................................................................................................................................... 1 1.1 Key Features...........................................................................................................................................................1 1.2 Read Before Use.....................................................................................................................
www.foscam.com 4.4.4 Snapshot Settings.................................................................................................................................... 51 4.4.5 IR LED Schedule...................................................................................................................................... 51 4.4.6 Lens Distortion Correction...................................................................................................................... 52 4.5 Alarm................
www.foscam.com 1 Overviews FI9851P is integrated IP Camera with a color CMOS sensor enabling viewing resolution 1280*720. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop from anywhere on your local network or over the Internet. They support the industry-standard H.264 compression technology, drastically reducing file sizes and conserving valuable network bandwidth. The IPCAM is based on the TCP/IP standard.
www.foscam.com Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Installation Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended. 1.3 Packing Contents ● IPCAM×1 ● CD×1 ● DC Power Supply×1 ● Quick Installation Guide ×1 ● Network Cable×1 ● Warranty Card×1 1.4 Physical Description 1.4.1 Front Panel Figure 1.
www.foscam.com 1.4.2 BottomView There are two labels located at the bottom of the camera; this is an important feature of original Foscam cameras. If your camera does not have labels as shown in Figure 1.3, it may be a clone. Cloned Foscam cameras can not use original firmware and are not eligible for warranty or technical services. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 2 Accessing the Network Camera This chapter explains how to access the network camera through web browsers and RTSP players. 2.1 Access the Camera in LAN This camera support HTTP and HTTPS protocols, so here will allow you to use HTTP and HTTPS port No. (1) Http:// LAN IP + Http Port No. Double click the IP Camera Tool icon and it should find the camera’s IP address automatically after you plug in the network cable. Figure 2.
www.foscam.com 2.2 Access the Camera in WAN 2.2.1 Static IP Addresses Users who have static IP addresses do not need to set DDNS service settings for remote access. When you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from the Internet using the WAN IP address and port number. How to Obtain the WAN IP address from a public website ? To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.
www.foscam.com NOTE : Make sure port forwarding is successful. You can do port forwarding two ways. 1. Login to your router to enable the “UPNP” function. You can then login to the camera as administrator, choose Network, and then choose UPnP to enable UPnP. Make sure that the status of UPnP reads “UPnP Successful” on the Device Status page. 2. Do port (HTTP port) forwarding manually. (See Figure 2.11 for further details) If your router has a Virtual Server, it can do port forwarding.
www.foscam.com 2.4 and 2.5. Figure 2.4 Figure 2.5 Figure 2.6 What is Port forwarding ? If you have never done port forwarding before, you can open and view the following link to understand the basic concept. Port forwarding allows for outside connections to access a specific device on your network from anywhere in the world. Every router automatically blocks any incoming connections for safety purposes.
www.foscam.com Let’s say the camera’s LAN IP address is http://192.168.8.100:2000 Step 1: Login to the router, and go to your router’s port forwarding or port triggering menu. Sometimes this is also under the name of Virtual Server or NAT. Using the Linksys brand router as an example, we would log into the router, and go to the Applications & Gaming menu. We would then click on the “Single Port Forwarding” sub-menu.
www.foscam.com Figure 2.13 Now you can use “http://Domain name + HTTP Port” to access the camera via the Internet. Take hostname cp4911.myfoscam.org and HTTP Port of 2000 for example, the URL link to access the camera via the Internet would be http:// test09.myfoscam.org:2000. Second method : Use the Third party DDNS to access the camera via the Internet Step 1, Please go to the third party DDNS website(such as www.no-ip.com) to create a free hostname.
www.foscam.com RTSP URL rtsp:// [user name][:password]@IP:HTTP port number/videosream The part in the square brackets may be omitted. user name & password: The user name and password to access the camera. This part can be omitted. IP: WAN or LAN IP address. Videostream:Here support three modes: videoMain, videoSub and audio. When the network speed is bad, here you had better select videoSub. If you select audio, you can only hear the sound but cannot see the video. For example: IP: 192.168.1.
www.foscam.com Figure 2.15 Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time preview. Figure 2.16 Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 2.17 If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation Guide about How to configure port forwarding. NOTE: If you modify the camera’s username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 3 Surveillance Software GUI Please refer to the Quick Installation Guide if you install the camera at first time.
www.foscam.com 3.1 Login Window Figure 3.1 Please check the login window above, it was divided to 4 sections from no. 1 to 4. Section1 Enter the Username and password The default administrator username is admin with no password, please reset the password at first using and prevent unauthorized users login the camera (read chapter 3.2.4 about how to change). Section2 Stream The camera supports two stream modes: Main stream and sub stream.
www.foscam.com Figure 3.2 3.2 Modify the Username and Password When you log in for the first time, it will come to the operating of modify the username and password automatically. Figure 3.2 Enter the New Username, New password and Confirm the password. Click Modify button, you will see the login page again. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 3.3 Surveillance Window Figure 3.3 Section1 FOSCAM Logo/ LiveVideo / Settings buttons : FOSCAM LOGO : Path to surveillance window. Click this button and back to the surveillance window : Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and do advanced settings. Section2 Multi-Device Window The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time.
www.foscam.com Figure 3.4 Section3 Mode/ Stream / Mirror/ Flip buttons Mode 1) 50Hz ---------Indoor surveillance (Region: Europe, China) 2) 60Hz ---------Indoor surveillance (Region: USA, Canada) 3) Outdoor Mode------Outdoor surveillance Stream The default Stream supports four modes: 0/720P/30fps/2M, 1/VGA/25fps/4M, 2/VGA/15fps/1M and 3/VGA/10fps/200K The format of the stream type is Stream type no. / Resolution / Maximum frame rate/ Bit rate 1) Stream type no.
www.foscam.com After changing, please re-login the camera and you can see the modification. Section4 IR LED Lights Click IR LED Lights and there are two modes to adjust the infrared led: Auto and Off . The default mode is Auto. Auto: Select it and the camera will adjust the infra led (on or off) automatically. Manual: Select it and turn off the infra led manually. Section5 Image quality settings In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
www.foscam.com Click the icon again and stop talking. 4------ Audio Click the button and the icon will become to , you can hear the sound around the camera if the camera has connected with other audio input device through the Audio Input port of the camera, Click the icon again and stop audio. 5----- Snap: Click it to make snapshot and it pop up a window which picture you snapshot, right click in the window and save the picture to anywhere you want.
www.foscam.com Figure 3.6 Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen. Zoom up/down: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size. Figure 3.7 NOTE: For Mac OS, the plugin cannot support Onscreen Mouse function, so you cannot allow to use it. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4 Advanced Camera Settings Click the button “Settings”, goes to Administrator Control Panel to make advanced camera settings. 4.1 Device Status Device Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera. 4.1.1 Device Information Figure 4.1 Camera Model: The model of the device. Camera Name: The Device Name is a unique name that you can give to your device to help you identify it.
www.foscam.com 4.1.2 Device Status On this page you can see device status such as Alarm status, NTP/DDNS status and so on. Figure 4.2 4.1.3 Session status Session status will display who and which IP is visiting the camera now. Figure 4.3 4.1.4 Log The log record shows who and which IP address accessed or logout the camera. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.4 4.2 Basic Settings This section allows you to configure your Camera Name, Camera Time, Mail, User Accounts and Multi-Device. 4.2.1 Camera Name Default alias is anonymous. You can define a name for your camera here such as apple. Click Save to save your changes. The alias name cannot contain special characters. Figure 4.5 4.2.2 Camera Time This section allows you to configure the settings of the internal system clocks for your camera. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.6 Time Zone: Select the time zone for your region from the dropdown menu. Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server. Choose the one that is closest to your camera. Sync with PC: Select this option to synchronize the date and time of the Network Camera with your computer. Manually: The administrator can enter the date and time manually. Note select the date and time format.
www.foscam.com Figure 4.7 How to change the password? Firstly, select the account which you want to change the password, then select “Change password”, enter the old password and the new password, lastly click modify to take effect. Figure 4.8 How to add account ? Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.9 Figure 4.10 Delete : Select the account which you want to delete, then click Delete button to take effect. NOTE: The default administrator account cannot be deleted, but you can add other administrator users. How to change the username ? Firstly, select the account which you want to change the username, then select “Change username”, enter the new password, lastly click modify to take effect. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.11 4.2.4 Multi-Camera If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if there is 8 cams installed. The firmware within the camera can support a maximum of 9 devices monitoring all at the same time.
www.foscam.com Figure 4.12 Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to. Figure 4.13 Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.14 Figure 4.15 Add cameras in WAN If you want to view all cameras via the internet(remote computer), you will need to add them using DDNS domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read How to configure DDNS settings in chapter 4.3.3) Login to the first camera using a DDNS domain name and port. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.16 Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS domain name, port number. Enter user name and password and then choose Add. Figure 4.17 1----- The camera model: MJ or H264. 2----- The 2nd camera’s name 3----- Fill in the 2nd camera’s DDNS host not LAN IP NOTE: The MJ series have the same HTTP Port NO. and Media Port NO.
www.foscam.com Figure 4.18 Return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first camera’s DDNS domain name and port to view all the cameras via internet. Figure 4.19 4.3 Network This section will allow you to configure your camera’s IP, PPOE, DDNS, UPnP, Port, Mail Settings and FTP Settings. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4.3.1 IP Configuration If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of your router or computer. Figure 4.20 Changing settings here is the same as using the IP Camera Tool. (Figure 4.23/4.24) It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC.
www.foscam.com Figure 4.22 If you don’t know the DNS server, you can use the same settings as the Default Gateway. 4.3.2 Wireless Settings Step 1: Choose “Settings” on the top of the camera interface, and go to the “Network” panel on the left side of the screen, then click “Wireless Settings.” Click the Scan button and the camera will detect all wireless networks around the area. It should also display your router in the list (Figure 4.30). Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Click the Scan button to search for wireless networks. Click the Page number to see other wireless networks devices if there are more than 10. Figure 4.23 Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network.
www.foscam.com 2 Enter the password of your router. 1 Click the SSID of your router and the relevant information will be filled in the fields automatically. Figure 4.24 Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network. The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless connection.
www.foscam.com Figure 4.25 4.3.4 DDNS FOSCAM camera has embedded a unique DDNS domain name when producing, and you can directly use the domain name, you can also use the third party domain name. FOSCAM domain name Here take cp4911.myfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you can see the domain name. Figure 4.26 Now you can use http:// Domain name + HTTP Port to access the camera via internet. Take hostname cp4911.myfoscam.org and HTTP Port no.
www.foscam.com Figure 4.27 Please register an account step by step according to instructions on www.no-ip.com After registration, please login your email which used to register. You will receive an email from website, please click the link to activate your ACCOUNT as indicated in email. Secondly: Login the link with the registered username and password to create your domain name. Figure 4.28 Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.29 Please create the domain name step by step according to instructions on www.no-ip.com Step 2 DO DDNS Service Settings within the Camera Please set DDNS Settings within the camera by hostname, a user name and password you’ve got from www.no-ip.com Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example. Firstly, goes to option of DDNS Settings on the administrator panel. Secondly, select No-Ip as a server.
www.foscam.com Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue Server on some brands of router). Take Linksys brand router as an example, Login the router, and goes to Applications & Gaming->Single Port Forwarding. Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed as below. Assign a name as you like here. Fill the Media Port no. of the camera on the column of External Port and Internal Port. Figure 4.
www.foscam.com Figure 4.32 The camera’s software will be configured for port forwarding. There may be issues with your routers security settings, and sometimes may error. We recommend you configure port forwarding manually on your router (Figure 4.30). 4.3.6 Port This camera supports HTTP Port / HTTPS Port/ ONVIF Port. HTTP Port is used to access the camera remotely. HTTP port : By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1 and 65535.
www.foscam.com Figure 4.34 Figure 4.35 Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and click “OK” to apply changes. Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is now fixed at a static IP address of http://192.168.8.102:2000.
www.foscam.com Figure 4.36 NOTE: If the camera cannot be accessed, please make sure the port forwarding is succeed. HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port. Sometimes you need to add the url to the Trusted Sites, Open Internet Explorer if it is not already opened. Click on Tools, then click Internet Options. Next, click the Security tab, then click the Trusted sites button. Figure 4.37 ONVIF port: By default, the ONVIF port is set to 888.
www.foscam.com here you had better select videoSub. If you select audio, you can only hear the sound but cannot see the video. For example: IP: 192.168.1.11 HTTP Port number: 88 User name: admin Password: 123 Here I can enter one of the following URLs in the VLC. 1．rtsp://admin:123@192.168.1.11:88/videoMain 2．rtsp:// @192.168.1.11:88/videoMain 3．rtsp://:123@192.168.1.11:88/videoMain 4．rtsp://admin@192.168.1.
www.foscam.com Figure 4.39 Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time preview. Figure 4.40 Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.41 If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation Guide about How to configure port forwarding. NOTE: If you modify the camera’s username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 4.3.7 Mail Settings If you want the camera to send emails when motion has been detected, here Mail will need to be configured.
www.foscam.com Figure 4.42 1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you select.
www.foscam.com Figure 4.43 If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test mail. If the test fails with one of the following errors after clicking Test, verify that the information you entered is correct and again select Test . 1) Cannot connect to the server 2) Network Error. Please try later 3) Server Error 4) Incorrect user or password 5) The sender is denied by the server.
www.foscam.com Figure 4.44 Figure 4.45 FTP server: If your FTP server is located on the LAN, you can set as Figure 4.43. If you have an FTP server which you can access on the internet, you can set as Figure 4.44. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode: Here supports two modes: PORT and PASV. Username/password: The FTP account and password. Click Save to take effect.
www.foscam.com Figure 4.46 Search and install Foscam Viewer on Google Play and App Store for for Android and iOS devices. If you want to know more details of the iOS APP or Android APP, see the iOS App User Manual or Android App User Manual. 4.4 Video This section allows you to configure Video stream settings, On screen display and Snapshot settings. 4.4.1 Video Settings There are two ways to set the stream video settings. They are main stream video settings and sub stream video settings. Figure 4.
www.foscam.com Resolution: The camera supports two types: 720P, VGA. The higher the resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well.
www.foscam.com Figure 4.49 Click OK button and return to the Privacy Zone page, click Save to take effect. Back to the surveillance window, you can see the privacy area as the following picture: Figure 4.50 Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4.4.4 Snapshot Settings On this page you can set the snapshot pictures’ image quality and the storage path. Figure 4.51 Image Quality: Low, Middle and High. The higher the quality, the picture will be clearer. Alarm Pictures Save Path: FTP. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the FTP automatically.
www.foscam.com Figure 4.52 4.4.6 Lens Distortion Correction Figure 4.53 4.5 Alarm Motion Detection IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or upload images to FTP. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 4.54 To enable motion detection, follow the steps below: 1 Enable Motion detection 2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity. 3 Trigger interval--- The interval time between two motion detections. Here supports 5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
www.foscam.com has been detected, the people around the camera will hear beep alarm sound. B Send Mail If you want to receive alarm emails when motion is detected, you must select Send Mail and set Mail Settings first. The alarm email cannot contain the alarm picture if you have not selected Snap picture. C Snap picture If you select this checkbox, when the motion has been detected, the camera will snap the live view window as a still picture and load it to the FTP.
www.foscam.com Click this button and select all time range. Figure 4.57 ② Specify an alarm schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. Figure 4.58 ③ Press the left mouse and drag it on the time boxes, you can select the serial area, Figure 4.59 Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 7 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime. 4.6 Record 4.6.1 Storage Location On this page you can change the manually recording storage path, the default storage path is c:\IPCamRecord. Figure 4.60 4.6.
www.foscam.com Figure 4.62 4.7 Firewall This section explains how to control the access permission by checking the client PC’s IP addresses. It is composed of the following columns: Block access from these IP addresses and Only allow access from these IP addresses. Figure 4.
www.foscam.com are in the IP list cannot access the Network Camera. Click Save to take effect. 4.8 System In this panel, you can back up/restore your camera settings, upgrade the firmware to the latest version, restore the camera to default settings and reboot the device. 4.8.1 Back-up& Restore Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future use.
www.foscam.com Upgrade Firmware by IP Camera Tool Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade. Figure 4.66 Figure 4.67 CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade.
www.foscam.com the upgrade documentation (readme.txt file) in the upgrade package before you upgrade. 3) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will not function correctly if a corrupt .bin file is used. 4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device Firmware.
www.foscam.com Click here to download the plugin. Figure 5.1 Figure 5.2 Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 5.3 Figure 5.4 Drag the download file to Firefox web page and it will prompt you to Install it. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 5.5 Reboot the Firefox after the plugin installation is successfully completely, then relogin the camera again, you can see the surveillance window in the center of the NOTE: If you could not view living video after running the ActiveX, only a red cross video or just a black screen. Please change another port number to try. Make sure all firewall or antivirus software on your computer does not block the active download and installation.
www.foscam.com Figure 5.6 2. Click “Remove”. Figure 5.7 3. After the ActiveX is removed, click “Restart now”. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 5.8 5.1.2 Install / uninstall the ActiveX of Google Chrome. 5.1.2.1 Install the ActiveX of Google Chrome. For the first time login the camera, it will prompt you to download the ActiveX. Figure 5.9 Download the plugin and drag it to the Extensions page of Google Chrome. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Go to Extensions page Figure 5.10 Click Add button to install the Plugins. Click Add button to install the plugin. Figure 5.11 Reboot the browser and login the camera again, you will see the surveillance window. 5.1.2.2 Uninstall the ActiveX of Google Chrome. After upgrading the camera’s software version, in order to experience the new version better, you may need to uninstall the old ActiveX before, and then install a new one.
www.foscam.com 5．Click on the top right corner of the Google browser menu bar, it will pop-up the drop-down menu, then click "Tools" -->”Extensions”. Figure 5.12 2. Select “ IPCAM ”, and click the trash canon on the right side. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 5.13 3. Click “Remove”, then restart the browser. Figure 5.14 5.1.3 Install / Uninstall the ActiveX of IE Browser. When logging in for the first time, you need to download and install the ActiveX add-on. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 5.1.3.1 Install the ActiveX of IE browser. Click Install Figure 5.15 5.1.3.2 Uninstall the ActiveX of IE browser. After upgrading the camera’s software version, in order to experience the new version better, you may need to uninstall the old ActiveX before, and then install a new one. TO uninstall the old ActiveX, you could do as follows: 1.
www.foscam.com Figure 5.16 3. Click “All add-ons”. Figure 5.17 4. Click “ocxIPcam Control”, then Right-click, select “More information” (or double-click “ocxIPcam Control”). Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 5.18 5. Click “Remove all sites—> Remove—>Close”. Then restart the IE browser. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Figure 5.19 5.1.4 I have forgotten the administrator password To reset the administrator username and password, press and hold down the RESET BUTTON for 5 seconds. Upon releasing the reset button, wait for 20 seconds, the camera will reboot and the username and password will return to the factory default administrator username and password. Please power on the camera before reset Default administrator username: admin Default administrator password: No password 5.1.
www.foscam.com (2) Open IE browser, then right click, select “Run as administrator” 5.1.6 Subnet doesn’t match Check whether your ipcamera in the same subnet of your computer. The step is Control Panel(Network Connections (Dbclick Local Area Connections (Choose General(Properties. Check subnet mask, IP address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise you can't access camera. 5.1.
www.foscam.com Figure 5.21 NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could not see video, please shut down firewall or anti-virus software to try again. 5.1.8 Can’t access IP camera in internet There are some reasons: 1、ActiveX controller is not installed correctly 2、The port which camera used is blocked by Firewall or Anti-virus software. Please change another port number and try again.
www.foscam.com IP address: obtain dynamically Subnet mask: obtain dynamically Gateway: obtain dynamically DDNS: Embedded FOSCAM domain name Username and password Default admin username: admin with a blank password 5.3 Specification ITEMS FI9851P Sensor Image Sensor Display Resolution Lens 1280 x 720 (1.0M Pixels) Min. Illumination 0 Lux (With IR Illuminator) Lens Type Glass Lens focal length f:2.8mm，3.6mm/4mm/6mm/8mm Opention Aperture F1.2 Angle of View 70° Image Compression H.
www.foscam.com Power Physical Privacy Block Set privacy area manually User Accounts Three levels user role Firewall Supports IP Filtering Reset Reset button is available Power Supply DC 12V/1.0A Power Consumption 4.2 Watts (Max.
www.foscam.com This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. 5.5 Warranty ShenZhen FOSCAM Intelligent Technology Limited.("FOSCAM") values your business and always attempts to provide you the very best of service. No limited hardware warranty is provided by FOSCAM unless your FOSCAM product ("product") was purchased from an authorized distributor or authorized reseller.
www.foscam.com Replacement Services If customers ask for replacement service, please contact point-of-purchase and follow their policy. Our technicians will inspect all items returned for replacement requests. If the retuned product is found in working order, we will return the same item received. However customers shall be responsible for all shipping & handling charges incurred for getting the units back to customers.
www.foscam.com FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee. Device cost (including accessories) is the standard uniform price provide by FOSCAM. Different region may have different service fee, please contact the point-of-purchase to confirm that before you ask for this service.
