User's Manual

Package Content
Product Diagram
Specification
5W
LED SMD2835 26Pcs+RGB SMD5050 12Pcs
2700K (Not adjustable)
1%-100% Brightness adjustable (Stepless dimming)
256C living color light (Single color, color gradient)
Input: AC100-240V; Output: DC12V, 1.5A
Setting hours & minutes
Setting 5,10,15,20,25,30 minutes
20minutes/9 minutes
6 sounds/4 sounds
0-10 levels
210mAh button battery (CR2032)
Yes
12H/24H
25%/50%/100%
ABS+PMMA
White
Φ180*H158mm
Power
Light source
Color temperature
Warm white setting
Mood light setting
Adapter specification
Wake-up time setting
Aid-sleeping time setting
Wake-up/Power snooze time
Wake-up/Aid-sleep sounds
Sound volume
Power back up
Bluetooth speaker
Time display format
Time display brightness
Lamp materials
Lamp color
Lamp size
1xWake-up light
1xAdapter (DC12V, 1.5A)
LED Wake-up light
User Manual
How to use
Power on
Using the provided adapter to connect the lamp with power socket, “AM 12:00“ will
be shown by default. Meanwhile, the other 7 icons will be shown in return, and they
will be disappeared after 1.5 seconds.
1. Knob switch setup:
Long press the knob switch for 1.5 secs to enter the menu settings,
then complete each setting by the following operations.
Press twice to exit the menu settings or wait for 30 secs to let it exit automatically.
Setting current time
Turn the knob switch to make the icon flash, then press the knob to enter
hours or minutes setting, and then turn the knob to select hours or minutes.
Finally press the knob switch again to complete the settings.
Setting wake-up time
Turn the knob switch to make the icon flash, then press the knob switch to
enter hours or minutes setting, and then turn the knob switch again to select
hours or minutes. Finally press the knob switch again to complete the settings.
Setting wake-up sounds
Turn the knob switch to make the icon flash, then press the knob switch to
enter wake-up sound setting, and then turn the knob switch again to select the
sound from 6 sounds. Finally press the knob switch again to complete the settings.
AM/PM display
Current time display
② Mood light touch area
12H/24H format setting
Aid-sleeping sounds setting
Wake-up sounds setting
Aid-sleeping time setting
Wake-up time setting
Current time setting
Bluetooth speaker display
DC power port
Press-to-snooze setting/
Time display brightness setting
Aid-sleeping on/off
Wake-up on/off
Sound volume +
Bluetooth on/off
Play/Pause
Sound volume -
① Warm white touch area
1. Touch switch
2. Knob switch
3. Button switch
Setting aid-sleeping time
Turn the knob switch to make the icon flash, then press the knob switch to
enter minutes setting, and then turn the knob switch again to select 5, 10, 15,
20, 25, 30 minutes. Finally press the knob switch again to complete the settings.
Setting aid-sleeping sounds
Turn the knob switch to make the icon flash, then press the knob switch to
enter aid-sleeping sound setting, and then turn the knob again to select the
sound from 4 sounds. Finally press the knob switch again to complete the settings.
Setting 12H/24H time format
Turn the knob switch to make the icon flash, then press the knob switch to
enter 12H/24H time format setting, and then turn the knob switch again to
select 12 or 24. Finally press the knob switch again to complete the settings.
Setting time display brightness
Press once the knob switch in turn to set the brightness to 25%, 50% or 100%.
2. Button switch setup
Bluetooth speaker on/off
Turn on: Press once the button to turn on the bluetooth pairing, the icon
will flash on the screen, meanwhile, there is a voice broadcast “Bluetooth
waiting connection”. The icon will stop flashing and display on the screen
when the bluetooth is connected successfully, meanwhile, there is also a
voice broadcast “Bluetooth connection is successful”.
Play/Pause: Press the button play or pause the bluetooth function.
Move Previous/Move Next: Turn the knob switch clockwise or anticlockwise
to Move Previous or Move Next audio or video.
Turn off: Press once the button to turn off the bluetooth speaker, the icon will
be disappeared on the display screen.
Sound volume +/-
Turn up: Press the button to turn up the volume from 0 to 10 levels.
Turn down: Press the button to turn down the volume from 10 to 0 levels.
Wake-up on/off
Turn on: Press the button to activate wake-up functions, the button will be
shown on the display screen. The warm white will be gradually brightened 30
minutes before the alarm clock time, and it will reach to the brightest level
at the alarm clock time.
The alarm clock will ring for 20 minutes every five minutes, the sound volume will turn
up gradually, and it will reach to the highest volume after 30 seconds. Then it will go
off after ringing for 20minutes if not pressing the snooze button. Meanwhile, the warm
white will also be off at this time.
Press to snooze: When the alarm clock rings, press once the knob switch to snooze
for 9 minutes, the button will flash frequently for 9 minutes. Press twice to turn off the
alarm clock and warm white. There is no limit to how many times you pressing the
knob switch for snoozing.
Turn off: Press the button to cancel the wake-up functions, the button will be
disappeared on the display screen.
Aid-sleeping on/off
Turn on: Press the button to turn on the aid-sleeping sound, the button will
be shown on the display screen. The sound will be turned down gradually until
it is disappeared at the aid-sleeping time. If the warm white is turned on, it will
be darkened gradually until it is off at the aid-sleeping time. If the mood light is
turned on, it will also be off at the aid-sleeping time.
Turn off: Press the button again to turn off the aid-sleeping sound, the button will
be disappeared on the display screen.
3. Touch switch setup
Warm white mode
Turn on: Pat twice the touch area ① to turn on the warm white.
Brightness adjustable: Long press the touch area to adjust the desired brightness.
When the brightness reaching to the max/min value, please remove your hands,
and then long press the touch area again to adjust the brightness accordingly.
Turn off: Pat twice the touch area to turn off the warm white.
Mood light mode
Turn on: Pat twice the touch area ② to activate automatic color changing.
Color selection: Press once the touch area to select the favourite color.
Color gradient: Press once the touch area again to return to color changing.
Turn off: Pat twice the touch area to turn off the mood light.
The warm white and mood light can’t be used at the same time, and both of
them have memory function, it can memorize the preset brightness or color.
4. USB charging
There is a USB charging port (DC5V, 1A) on the back of the lamp which can
charge the smart phone or other devices.
1xQuickstart guide
1xUser manual
USB charging port
Bluetooth speaker
Button Battery
5. FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
H102