Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Note: This manual includes some important safety method and some information about how to use the product correctly to avoid the unnecessary troubles.Before you use the product,please refer to the manual carefully. ● Don’t put the product in high temperature ,humid amd dusty environment ● Don’t put the product in the vehicles,whose windows are closed. ● Don’t throw and crash the product strongly.Don’t vibrate the TFT screen, or it will be broken down or displays abnormally.
1.Illustartion of appearance and button 2.First usage 2.1 battery management and charge 2.2 Connect the PC 3.Operation Model 3.1 Main Model description 3.2 Status bar describe 3.3 The usage of touch screen 3.4 basic setting 3.5 sound and realistic setting ring,inform and screen brightness 3.6 application 3.7 privacy 3.8 device memory 3.9 language and keyboard 3.10 the date and time 3.11 USB mode choice 3.12 APK installer(application installation tools) 3.13 settings 4.Installation 4.1 basic function 4.
1.1 Touch screen 7Inch touch screen:to click、drag and other operation within the touch area 1.2 POWER Power on : Press the button and the player show the start-uping picture then the machine show the menu: Power off:Press the button MENU for 5 seconds,the system shows “Power off”,click the “Power Off”to end system operation. Screen lock :Press the button to lock or unlock the screen 【Note】: 1.
2、First usage 2.1 battery management and charge When you use the machine for the first time ,please secure that the battery is full-charged: Insert the charge or adapter to the USB interface. The first and second time must hold on 2 hours,later you can hold On for about 4 hours. 【Note】:Standard charge(input: AC110~240V 50/60Hz Max:180MA output: DC5.0~5.5V/1.5A)needed,no DC charge offered,by USB interface to charge . During the charge,the battery icon is running.
On the main screen, you can : Manage the software icon on the main screen:the icon becomes bigger after press ing the software icon for 3 seconds ,you can move it to anywhere you want Delete icon:drag the icon to bin then the icon becomes red after press ing the software icon for 3 seconds Press the touch screen then popup:add to “main page”window Widgets;Wallpapers: 3.
3.3 The usage of touch screen 4.3inch touch screen The machine was allocated for the machine,Description for main touch screen,some introduction about how to use the touch screen has included. You can touch at the left corner to return the previous menu, In different application program,by touching return key operation.
Choose the file and than the software or file ,if you want to delete the icon or the file,please long press to delete Management application: management and delete the installation of applications Development: set the application's development options 【 note 】 : when the firmware upgrade please close USB debug mode 3.7 Personal setting 3.
【 note 】 : please through the option of the "delete SD card" to remove security SD card, avoid hot plug pulled by the equipment damage. 3.9 language and keyboard Set up regional (language and regional), text input and automatic correction option; Choose regional: 54 species of national languages are available Note: android system support of 54 species of language, the menu interface support and kind of language.
Set the date, time, time zone and format Set the date: into the date set interface set the date Set time zone: in the select time zone interface set time zone Set a time: in the time of show format Choose date format: choose different date format to display the date 3.11 USB mode choice Choose the USB work mode: OTG/HOST/SLAVE...... ... USB: choose USB host mode in work, this mode can be mounted U plate and peripheral equipment 3.
3.13 Settings Tap application icon. 4.Installation Steps: 1. Obtain LiveSuitPack100_ex.exe file first. Then locate it to direction “D:\test”. As followed picture. 2 Double click LiveSuitPack100_ex.
3 You can see a file named “LiveSuit.exe”. It is just “LiveSuit”, the software we need. 4.Double click LiveSuit.exe, it will run, please see the picture as below: Note: You’d better install “LiveSuit” in the hard disk of your PC than in memory disk.eg :U disk. 4.1. Basic function 1 backup and query device information 2 Firmware upgrade 3 Upgrade LiveSuit itself (depends on network and server) 4.2.
Picture1: Software interface 4.3. Buttons Select IMG:Click the button to select the firmware used for upgrade. Update:Click the button to start upgrade after identifying U disk once you insert. NetSync:After the device has been inserted to PC, and recognized as U disk. Click the button to start upgrade, Help:Click the button for help. Exit:Click the button to end and exit. Don't click the button when you are upgrading or inquiring the information.
4 During upgrade, you will be asked to install the USB Driver twice. The driver file is “usbdrv.inf” in the folder “usbDriver”,which is located at the installation path of “LiveSuit” ( for more detail information please refer the to “Appendix:USB Device Install”) 5 If you upgrade successfully, please pull out the device, then reset it. 6 if failed, please pull out the device, reset it. And do the upgrade again. 7 if upgrade failed so many times, please contact with the franchiser.
Select “ No, not this time”, click” next” Select “Install from a list or specific location(Advanced), then click “ next”:
Click”brouse” to select location to search drivers , then Click “ next” : Click :”Continue Anyway”:
Then Click”Finish” About 2 second later, Install Driver again
Click “Next”: Select “Install from a list or specific location(Advanced), then click “ next”:
Click”brouse” to select location to search drivers , then Click “ next” : Click “Continue Anyway”:
Click “Finish”
After startup screen flash or the picture has been on first appear just cut off the electricity 1 power is not enough, please charge Headset can't hear the voice 1 please check whether the volume set to 0 2 check the music file is damaged. Try playing other music to determine.