Lightning Detector Sensor Model: WH57E Contents 1. Getting Started............................................ 3 1.1 Parts List ........................................... 3 2. Overview .................................................... 4 2.1 Features ............................................ 5 3. Setup Guide ................................................ 7 3.1 Installing batteries ............................ 7 3.2 LED Indicator ................................. 11 4. Sensor Placement ..............
5.1 Pair with Gateway .......................... 15 5.2 Wi-Fi Connection for the Gateway. 16 6. View Online Data with WS View ............. 17 7. Set Email Alerts ........................................ 19 8. Specification ............................................. 21 9. Warranty Information ...............................
1. Getting Started 1.
2.
2.1 Features Lightning Detector Detects lightning bolts and storms within 25 miles (40 kilometers) High or low sensor sensitivity selectable to meet different requirements.
(requires the gateway and your phone is using the same Wi-Fi network) Battery power level display on the WS View App When paired with a Weather Station Console (HP2551/HP3500/HP3501): View lightning data in real-time on the Display Get alerted to lightning strikes with the flashing lightning icon When uploaded to Ecowitt Weather Server: View lightning data & history records & graph on the website Receive email alerts from the server Remote monitoring with smart phone, 6
laptop, or computer by visiting the website 3. Setup Guide 3.1 Installing batteries 1.
Figure 2: Battery installation 2.
Indoor/outdoor: Dip switch 1, default setting is for “outdoor”, no matter the sensor is placed indoor or outdoor, set this dip switch to outdoor to avoid system picks up noise and triggering false lightning. Antenna: Dip switch 2, default setting is for long antenna, as this is the antenna used inside. Please do not make any change with this dip switch setting. Sensitivity: Dip switch 3,4. Default setting is for sensitivity between high and mid.
Switch in down position. position.
3. Insert two 1.5V AA batteries. The LED indicator will turn on for four seconds and normally flash once every 79 seconds (the sensor transmission update period). Note: If no LED lights up or stays lit permanently, make sure the batteries are inserted the correct way or a proper reset happens. Do not install the batteries backwards. You can permanently damage the sensor. 4. Close the battery door. 3.
Flash (for 2S): Indicates detection of noise signals, prompting the user that current location has high level noise. You can either set dip switch 3, 4 to mid or low sensitivity level which raised to a higher threshold level for noise filtering, or you can find another location for lower noise level. Steady on (for 2S): Indicates detection of interference signals. It means there is lightning like signals around.
4. Sensor Placement The sensor can be placed both indoor or under porch, balcony. To mount or hang the unit on a wall or wood beam: Use a screw or nail to affix the remote sensor to the wall, as shown on the left side of figure 4, or Hang the sensor using a string, as shown in right side of figure 4.
Figure 4: Indoor sensor mounting Note: Make sure the sensor is mounted vertically and not lying down on a flat surface. This will insure optimum reception. Wireless signals are impacted by distance, interference (other weather stations, wireless phones, wireless routers, TVs and computer monitors), and transmission barriers, such as walls.
solid metal and earth (down a hill, for example). 5. Wi-Fi Configuration with gateway To view the lightning data on your mobile application and receive email alerts on our weather server, you need to pair this device with our GW1000 Wi-Fi Gateway or HP2551/HP3500/HP3501 Weather Station (sold separately). 5.
If one WH57 sensor has been hooked on GW1000 before, and you have a new WH57 sensor to replace the old one, just power off the old sensor and power on the new sensor, the gateway will pick up the new sensor data automatically. You may also go to the Sensor ID page of the app (requires the Wi-Fi configuration done first) to Re-register the sensor if not picked up automatically. 5.2 Wi-Fi Connection for the Gateway For this part, please refer to the manual of the GW1000 Wi-Fi gateway.
6. View Online Data with WS View When the Wi-Fi configuration is done, you may view lightning data as well as the sensor battery level on WS view App at the live data page.
Note: It requires your phone and the gateway using the same network to view your sensor data on the WS View app. To remote monitor the sensor data, please upload the data to our free Ecowitt Weather Server: https://www.ecowitt.net. Detailed operation instructions can be found on the GW1000 manual.
7. Set Email Alerts Once your device is added successfully on the Ecowitt Weather server, you may set alerts for the lightning distance and daily count on the website to get email notifications.
8.Specification Power: 2x1.5V AA batteries(not included) Sensor Size: 123x42x14mm Frequency: 915MHz Wireless transmitting range: 100M (300feet) Lightning detection range: 0-25 miles/0-40km Sensor reporting interval: 79 seconds Working temperature: 0~50C(32~122F) Note: Once lightning strikes detected, the led light will flash once, and the ecowitt.net will push email alerts at the same time.
9.Warranty Information We disclaim any responsibility for any technical error or printing error, or the consequences thereof. All trademarks and patents are recognized. We provide a 1-year limited warranty on this product against manufacturing defects, or defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased, and only to the original purchaser of this product.
cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, or claims based on misrepresentation by the seller, or performance variations resulting from installation-related circumstances. FCC Statement Statement according to FCC part 15.19: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference. 2.
Statement according to FCC part 15.21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. Statement according to FCC part 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver.
