User's Manual

Ceiling Fan Remote Controller Kit

User Manual

PARAMETER LIST:

Voltage

Output Power

Fan

Lamp

220V

<=150W

KEY FEATURE:

●RF wireless digital transmission technology is adopted to achieve the one for one control

mode, which provides a rate of coincident code less than 1/50000. (Transmitter and receiver

must be sent back to factory for maintenance if damaged.)

●In a sufficient space, you can put the receiver at any angle. No worry about the direction.

Neutral to FAN and LIGHT

LIVE wire to FAN

LIVE wire to LIGHT

PAGE 1
Ceiling Fan Remote Controller Kit User Manual Neutral to FAN and LIGHT LIVE wire to FAN LIVE wire to LIGHT PARAMETER LIST: Voltage 220V Output Power Fan Lamp <=150W <=150W KEY FEATURE: ●RF wireless digital transmission technology is adopted to achieve the one for one control mode, which provides a rate of coincident code less than 1/50000. (Transmitter and receiver must be sent back to factory for maintenance if damaged.) ●In a sufficient space, you can put the receiver at any angle.
PAGE 2
① Light ON ② Light OFF ③ FAN Speed Control ④ Hi-Med-Low Speed circled automatically ⑤ Fan shutdown ⑥ Timing ⑦ Battery for transmitter (1.5V AAA*2, not include) NOTICES: 1. If the remote can not control the ceiling fan lamp, please check: a. Does receiver wired correctly? Do you hear “beep” at power on? If no, check wire connection. b. Does the remote indicator flick when you press any button? If no, check battery. c.
PAGE 3
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.