VB608 - Video Baby Monitor User Manual Ver.1.
WELCOME… to your new digital Baby Monitor! Thank you for purchasing the product. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom. This User’s Guide provides you with all the information you need to get the most from your product.
Overview of your Baby Monitor Parent Unit: 1. Lcd display 2. Microphone 3. Power indicating led 4. Signal indicating led 5. PTT key 6. Music play control key 7. Backlight + key / Right key 8. VOX key 9. Power key / Return key 10. Speaker 11. Volume – key / Down key 12. Menu / OK key 13. Backlight - key / Left key 14. Volume + key / Up key 15. Power adapter connector Baby Unit: 1. Light Sensor 2. Camera Lens 3. Infrared LEDS 4. Power LED 5. Microphone 6. Temperature Sensor 7. Power adapter connector 8.
Table of contents 1.Safety Instructions ......................................................... 5 2. Getting started ...............................................................6 2.1 Baby unit power supply ..................................... 6 2.2 Parent unit power supply ....................................6 3. Using the Baby Monitor VB608.....................................7 3.1 Setting up ............................................................7 3.2 Pairing camera ............................
1.Safety Instructions WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Manual, safe to use. Therefore, always read the instructions in this User’s Manual carefully before using the device. Adult assembly is required. Keep small parts away from children when assembling. This product is not a toy. Do not allow children to play with it.
2. Getting started 2.1 Baby unit power supply 1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket. NOTE: Only use the power adapter provided 2. A blue light led will display indicate the baby unit is working 2.2 Parent unit power supply Charging the parent unit fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure. 1.
3. Using the Baby Monitor 3.1 Setting up Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit. NOTE Do not place the baby unit within baby’s reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. 3.
The baby unit has 6 high-intensity infrared LEDs for picking up clear images in the dark. 3.4 music player Press and hold music key will turn on the music player and play lullaby through the baby unit; press the music key again will turn off it. 3.5 Talk function Press and hold PTT key on the parent unit to talk to your baby through the baby unit loudspeaker. The symbol will be displayed at the middle of the screen. 3.
4. Monitoring Screen Icons 1. Signal strength indicator 2. Temperature of the baby’s room 3. Lullaby is playing 4. Vox function activated 5. Alarm activated 6. Battery indicator 7. Date and time 8. Backlight brightness bar 9. Volume level bar 10. PTT function activated 5. Menu Options 5.1 Main menu Press “Menu/OK” key at monitoring screen will enter the main menu, It contains 6 items : 1. Camera 2.
3. 4. 5. 6. Settings VOX Language Time and date You can press the “up/down” key or “left/right” key to move the cursor to select an item and press “Menu/OK” key will enter the sub-menu which you selected. Press “Return” key will back to monitoring screen. 5.
Camera?”, then push the pairing key on the back of the baby unit within 10 seconds. 5.3 Alarm Press the “Menu/OK” key to choose an item, the“up/down” Key to move the cursor and then the “Menu/OK” key to confirm the value. Press the “Return” key will back to the previous menu. 5.4 Settings 5.4.1 Theme Switch theme to Light elegant or Dark elegant. 5.4.2 Temperature unit Switch the unit to Celsius or Fahrenheit 5.4.
You are be able to adjust the brightness of the LCD you are viewing and the LCD backlight active time in menu operation. 5.4.5 System Info There are contains system information such as software version ,hardware version, build date etc. 5.5 VOX 5.5.1 System mode This menu allows you to choose the working mode from the following: Normal mode / VOX mode. 5.5.2 VOX Sensitivity Switch the Vox sensitivity at Low / Medium / High Level. 5.
5.7 Time and date There are contains 2 items in this menu Set time / date Set format Press “menu/OK” key to choose item,”up/down” key move the cursor and “left/right” key to change value .
6.TECHNICAL FEATURES - Frequency: 2.4 GHz Digital - Modulation Mode: GFSK - Operating temperature: -10 to +45°C - Operating Humidity: <85% - Range: 260m in open field Monitor - LCD: 4.3” TFT LCD - Resolution: 480 x 272 pixel - Battery: Li-Polymer 1760mAh - Dimensions (W x H x D): 82.5X151.6X19.5 mm Camera - Sensor: CMOS - Minimum Illumination: 0Lux ( IR on) - Night Vision Distance: 15ft ( 5m) - Lighting sensor - Temperature sensor - Dimensions (W x H x D): 62.5 X115 X 62.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Operation is subject to the following two conditions： (1) this device may not cause harmful interference； (2) this received, device must accept including interference any that interference may cause undesired operation； This equipment complies with FCC radiation exposure limits setforth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
