VB602 Video Baby Monitor User Manual V1.
OPERATING MODE Thank you for choosing this baby monitor. The sober design of our product easily integrates with all interiors and allows you to keep a watchful eye on your babies. Communication between transmitter and receiver is through radio waves at a max distance of 260 m (distance in open field). The digital connection provides transmission without interference. The camera is equipped with infrared LEDs that automatically switch on in case of insufficient light conditions.
PACKAGE CONTENT 1 Monitor X1 2 Camera X1 3 Power adapter X2 DESCRIPTION Monitor view 1 LCD display 2 LED for in Charging. 3 LED power indicator 4 Key Power On/Off 5 Key menu / OK 6 Key Return - undo.
Camera view 1 Light sensor 2 Camera lens 3 Infrared LEDs 4 Power LED 5 Microphone 6 Loudspeaker 7 Paring key 8 Key power on/off 9 Temperature sensor 10 Power connector 3
Before installing the camera, test the device to make sure that position is suitable. Check the correct signal reception. If necessary, move the camera to improve reception. Connect the camera power to the transformer supplied. The blue LED turns on to indicate that it is running. Connect the monitor power. The display turns on for a few seconds to indicate battery charge level. We recommend that you completely recharge the battery before first use.
MAIN SCREEN 1 2 3 4 5 6 7 Signal level Temperature measured in child’s room Playhead of a melody in progress Alarm activated Level of battery charge Activated intercom function Date and time MAIN MENU To access, press « menu ». This menu contains 6 icons: 1 Camera 2 Alarm 3 Setting 4 VOX setting 5 Languages 6 Information Press the key « up » and « and » to select the option. PARING WITH CAMERA The display and the camera are paired at the factory.
MUSIC PLAYING Pressed the music key to activate a lullaby on the camera, Press this key again to stop the melody. INTERCOM FUNCTION Press the PTT Key to activate the intercom function. The icon displayed indicates that the microphone is active. Keep this key pressed until you have finished speaking. Do not release too quickly not to interrupt the conversation.
ADVANCED PARAMETERS • Date and Time: Allows setting of date and time of your product. • To change the line, press the key “right” • To change time, press “Up/Down” • Press to switch to minutes “Left/Right” • To activate summer time, select the line with the key ”right” and press “Down” • When settings are finished, press « Done ». • Temperature scale: Celsius or Fahrenheit degrees. • Anti-flickering: the flickering is due to artificial lighting. In Europe, use 50Hz.
SYSTEM INFORMATION The system information icon contains data of the software installed in the product. TECHNICAL FEATURES - Display LCD 2 inches - Resolution: 220X176@20fps - Frequency: 2.4 GHz Digital - Range: 260m in open field - Consumption max: 500mA@5VDC - Battery Li-Po 540mAh - Sensor: 0.3Mpix CMOS - LED infrared - Lighting sensor - Temperature sensor - Operating temperature: -10 to +45°C CLEANING AND MAINTENANCE • Do not clean with abrasive or corrosive substances.
9 This page has been left blank intentionally.
This page has been left blank intentionally.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.