User's Manual

ManualsBrandsSHENZHEN FCAR TECHNOLOGY ManualsElectronicsAUTO DIAGNOSTIC SYSTEM

FCAR Series Product Operation Manual Instruction

Statement

 This manual is designed for the use of FCAR products; it cannot be copied or stored in any form (electronic,

mechanical, photocopying, recording or otherwise) without prior written permission being secured by Shenzhen

FCAR Technology Co., Ltd.

 This manual is intended for professional vehicle repair technicians. This manual provides the operation methods for

FCAR products only, and the company accepts no responsibility for the consequences caused by abusing the operation

methods on other equipment.

 The company shall not undertake any responsibility for accidents caused by the user personally or the other person,

or costs and expenses due to equipment damages, equipment loss that are caused by the user’s abuses, misuses,

arbitrary changes or repairs,operations of the equipment not in accordance with the manual requirements. This

manual is written in accordance with the existing configuration and functions of the product, it’s subject to changes

without notice if the product adds new configuration and functions.

 The company has registered the trademark in mainland China. The company declares that the ownership

of the registered trademark, service mark, domain name, logo, and company name in countries which they have not

yet been registered belongs to the company. Other products and their company name trademarks mentioned in this

manual belong to the original registered company. The trademarks, service marks, domain names, logos, company

names or other companies mentioned may not be used without prior written permission of the owner.

Registered Trademark

Shenzhen FCAR Technology Co., Ltd (short for FCAR) had registered a trademark in China and several

foreign countries. In countries where any of the FCAR trademarks, service marks, domain names, logos and company

names etc. are not registered, FCAR claims to other rights associated with non-registered trademarks, service marks,

domain names, logos and company names etc. Other products or company names, logos, service marks etc. referred to in

this manual still belong to their respective owners. You shall not be allowed to use any trademarks, service marks, domain

names, logos of FCAR or any third company without the written permission from the owner of the applicable trademarks,

service marks, domain names, logos or company names etc.

FCAR Series Product Operation Manual Instruction

 Before using FCAR series product, please read this manual carefully.

 This manual is based on the current product functions and configurations and it will subsequently be amended if any

new function and configuration are added. New specifications can be downloaded at FCAR website

(http://www.fcar.com ).

 Please carefully read the "Note" "Remark" and "Description" of the user manual to ensure that users can use our

products properly and safely.

For more product introductions and help please visit the official website (http://www.fcar.com).

Summary of content (33 pages)

PAGE 1
FCAR Series Product Operation Manual Instruction Statement  This manual is designed for the use of FCAR products; it cannot be copied or stored in any form (electronic, mechanical, photocopying, recording or otherwise) without prior written permission being secured by Shenzhen FCAR Technology Co., Ltd.  This manual is intended for professional vehicle repair technicians.
PAGE 2
FCAR Series Product Operation Manual Instruction Contents STATEMENT .............................................................................................................................................................................. 1 CHAPTER I PRODUCTION INTRODUCTION ............................................................................................................................. 3 1.1 INTRODUCTION AND FEATURES FOR F6 PLUS ............................................................
PAGE 3
FCAR Series Product Operation Manual Instruction Chapter I Production Introduction 1.1 Introduction and Features for F6 Plus Petrol version of F6 PULS is the diagnostic equipment for almost every gasoline engine vehicle in the world. It has the industrial tablet hosts with the features of waterproof, anti-drop, and anti-oil pollution, which can be used under a variety of harsh environments to meet users needs; It has a wild range of diagnosis.
PAGE 4
FCAR Series Product Operation Manual Instruction 1.2.4 Precautions 1) Forbid switching main unit frequently and cut off the power suddenly, power supply instability and abnormal power supply etc.
PAGE 5
FCAR Series Product Operation Manual Instruction Chapter II 2.
PAGE 6
FCAR Series Product Operation Manual Instruction Side View Back View Host Interface Description 2.2 No. Name No.
PAGE 7
FCAR Series Product Operation Manual Instruction Chapter III VCI Box Structure No. Name Description On when powered on (connected to ① Power indicator ② Diagnostic indicator ③ Bluetooth indicator On when connected to a tablet ④ USB indicator On when connected to a tablet vehicle) No.
PAGE 8
FCAR Series Product Operation Manual Instruction Chapter IV F6 Plus host menu description Power on the host (press for 5 seconds) through the power switch mentioned above; Enter the main interface: 4.1 Vehicle Diagnosis Enter from this [Vehicle Diagnosis] menu to perform vehicle diagnosis. A series of vehicles fault diagnosis can be carried out.Since there are different models of the product, such as petrol version version, please subject to the actual display menu.
PAGE 9
FCAR Series Product Operation Manual Instruction 4.2 Vci Connection 1. [Connection Method]-Bluetooth; 2. [Connection Method]-USB; 4.3 Data Management Data management: storage location for screen shots, video, test logs, vehicle version path, etc.; for user’s reference.
PAGE 10
FCAR Series Product Operation Manual Instruction 4.4 Remote Diagnosis This function allows our technical staff to connect to your host through the network, remotely to help you diagnose the vehicle. 4.5 Reference Guide Here we have built-in product instructions, maintenance information, circuit diagrams and other information for the user to learn.
PAGE 11
FCAR Series Product Operation Manual Instruction 4.6 Upgrade When connected to the Internet via Wi-Fi or cable interface, upgrade the diagnostic software to improve the product performance timely. 4.7 Settings Set the system Language, Units, User Info, Self-Test, Activation, Print Settings, Push Notification, About Us and other functions.
PAGE 12
FCAR Series Product Operation Manual Instruction 4.7.1. Language Settings Our products support multiple languages. You can set languages purchased. 4.7.2. Unit Set the live data units in diagnostic software. You can select Metric or English as needed.
PAGE 13
FCAR Series Product Operation Manual Instruction 4.7.3. User Information Set you personal information: name, phone, email, address, and so on. 4.7.4. Self-Test You can check the open circuit or short circuit of the main test line and OBD-II connector. 4.7.5. ACTIVATION The product has a usage restriction of limited times when shipped. After your purchase, you can permanently activate the product.
PAGE 14
FCAR Series Product Operation Manual Instruction 4.7.6. PUSH NOTIFICATION This function provides you industry dynamics, company training information, technical data and other services. 4.7.7. SYSTEM INFORMATION It is about the system information, activation status, storage status, etc.
PAGE 15
FCAR Series Product Operation Manual Instruction 4.7.8.
PAGE 16
FCAR Series Product Operation Manual Instruction Chapter V 5.1 Vehicle Diagnosis Connection method of host and VCI Connect the VCI box to the vehicle to be diagnosed via the main test line and diagnostic connector Turn on the machine, enter [Settings]-[VCI connection]. It can be connected via Bluetooth and USB cable: First: Connect the host with VCI box via Bluetooth 1. It is default paired and will automatically connect when used.
PAGE 17
FCAR Series Product Operation Manual Instruction 2. Wait a minute and the ID of VCI box connected to the vehicle can be found. Click Connect to pair; 3. Click "Pair"; 4. After the pairing is successful, VCI Bluetooth lamp on the host will light, and the Bluetooth indicator on the VCI box will also light, which means successful connection. When the connection is OK, F6 plus displays . It will automatically pair next time you use it, and you do not need to set again.
PAGE 18
FCAR Series Product Operation Manual Instruction The Bluetooth indicator on the VCI box is green, as shown in the following figure. Second: Connect the host and VCI box via USB data cable 1. Select USB, status is "ON"; connect the VCI box and the F6 Plus main unit with the USB cable in the package. 2.
PAGE 19
FCAR Series Product Operation Manual Instruction 3. The USB indicator on the VCI box is green, indicating successful connection; as shown in the following figure. The USB indicator on the VCI box is green, as shown in the following figure. 5.2 Vehicle Diagnosis The following is an introduction to the F6 Plus petrol menu. Real car test Honda Fit . 1.
PAGE 20
FCAR Series Product Operation Manual Instruction 2. Select [Asian - Honda ]; 3. Select the software version; 4. You can select Auto or Manual, take [Scan vehicle information ] as an example.
PAGE 21
FCAR Series Product Operation Manual Instruction 5. Find the car information and click [Enter]; 6. Choose the area of car manufactured country [General]: 7. Choose the system for testing [Engine control module ]: 8. Enter the diagnostic interface. In the engine control module, there are Read fault code, Read history fault code, Erase fault code, Live data, Actuation test and other functions.
PAGE 22
FCAR Series Product Operation Manual Instruction 9. Select Read DTCs and find the definition ; 10.
PAGE 23
FCAR Series Product Operation Manual Instruction 11. There will be Actuation test and Special Function for users to select.
PAGE 24
FCAR Series Product Operation Manual Instruction Chapter VI Upgrade and Activation Customers who bought FCAR products are suggested activating the machine immediately and regularly upgrade it and complete their personal information to ensure your use and the model program upgrade. Take F6 Plus as an example in the following illustration. 6.1 Upgrade 1. Click [Update]; 2.
PAGE 25
FCAR Series Product Operation Manual Instruction 3. Click Update for corresponding items. 4. Click on the version upgrade behind the [Database] to upgrade all the latest software programs. 6.2 Activation FCAR products are not permanently activated when left the factory. After you power on the machine and select models, you will be prompted: "You are using the trial version, ** times left ", Click [Activate] to enter the activation interface. Use the most convenient two-dimensional code to activate.
PAGE 26
FCAR Series Product Operation Manual Instruction 3. Upon completion, the activation code will be displayed; 4.
PAGE 27
FCAR Series Product Operation Manual Instruction 5. Click [Activation]; 6. Activation is successful. If you are prompted Activation Failed, start again. 7. After the activation is successful, you can see the status bar is displayed as "Activated.
PAGE 28
FCAR Series Product Operation Manual Instruction Chapter VII FCC COMPLIANCE Compliance Information FCC ID: 2AJDD-IDIAGSF6P FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 29
FCAR Series Product Operation Manual Instruction an accessory designated for this product or when used with an accessory that Contains no metal and that positions the handset a minimum of 1 cm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.
PAGE 30
FCAR Series Product Operation Manual Instruction Chapter VIII Warrant Clause Dear FCAR customer, thank you for choosing FCAR. In order to make the best use of the product, we recommend you taking good care of your product, and operating in accordance with user manual's instructions whenever you use it. Your product will be able to serve you longer if all the requirements above are met. 1.
PAGE 31
FCAR Series Product Operation Manual Instruction caused by your negligence are at your peril. 8. During the product warranty process, you will bear the costs associated with delivering the product to the designated place of FCAR: Including product packaging, transportation, insurance and other expenses. 9. Within the product warranty period and under this warranty clause, you can enjoy free warranty service for the losses due to product defects. FCAR shall not be liable for your direct or indirect loss.
PAGE 32
FCAR Series Product Operation Manual Instruction 32
PAGE 33
FCAR Series Product Operation Manual Instruction 33