Specifications

ManualsBrandsShenzhen Farben information Technology ManualsElectronicsWi-Fi Module

Rev1.02019/01/05

echnology

FB 9083 01



FB 9083 01

IEEE 802.11b/g/n 1T1R USB Wi-Fi Module

Features



OrderModule

Type

：



SupportedWLANStandard

IEEEStd.8 02.11b

IEEEStd.8 02.11g

IEEEStd.8 02.11n

Workingfrequency



2.412~2.462GHz



StandardUSBInterface



SupportedUSB1.1/USB2.0

SupportMaxdataratesof

Ratesof150Mbps

SupportSing le



Description



FB908301isahighlyintegratedsingle‐chip802.11b/g/nWirelessLAN

(WLAN)networkUSBinterface(USB1.1/2.0co mpliant)controller.It

combinesaWLANMAC,a1T1RcapableWLANbaseband,andWLANRFina

SOC

chip.FB90 83‐01

providesacompl e tesolutionforahighthroughput

performanceintegratedwirelessLANdevice.The

FB908301

WLANbaseband

implementsOrthogonalFrequencyDivisionMultiplexing(OFDM)with1

transmitand1receivepathandiscompatiblewiththeIEEE802.11n

specification.Featuresincludeonespatialstreamtransmission,shortguard

interval(GI)of400ns,spatialspreading,andtransmissionover20MHzand

40MHzbandwidth.



BlockDiagram



FB908301

Summary of content (18 pages)

PAGE 1
FB 9083 01 IEEE 802.11b/g/n 1T1R USB Wi-Fi Module Features Order ModuleType： Supported WLAN Standard IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n Working frequency Standard USB Interface Supported USB1.1/USB2.0 Support Max data rates of Rates of 150Mbps Support Single 2.412~2.462GHz Description FB 9083 01 is a highly integrated single‐chip 802.11b/g/n Wireless LAN (WLAN) network USB interface (USB 1.1/2.0 compliant) controller.
PAGE 2
FB 9083 01 1 General Description 1.1 Introduction FB908301isahighlyintegratedModule802.11b/g/nWirelessLAN(WLAN)networkUSB interfacecontroller.Supported2.412GHz~2.462GHzfrequencyband，USB1.1/USB2.0interface， Maximumdatarate54Mbpsin802.11gand150Mbpsin802.11n。 Figure1TopViewFigure2BottomView 1.2 Protocol Standards Modulesupportcompatible： IEEEStd.802.11b IEEEStd.802.11gIEEE Std.802.
PAGE 3
FB 9083 01 2 Features FB9083-01Module’sfeaturesinthetables: Band 2.412~2.462GHz Wi-Fistandards 802.11b/g/n(1x1) 11b:DBPSK,DQPSKandCCKandDSSS 11g:BPSK,QPSK,16QAM,64QAMandOFDM Modulation 11n:MCS0~7OFDM 11b:1,2,5.5and11Mbps 11g:6,9,12,18,24,36,48and54Mbps Phyrate 11n:MCS0~7,upto150Mbps PinNO. 6pin HostInterface USB2.0 PCBStack 4-layers Dimension Standard12.67mmx12.3mmx1.
PAGE 4
FB 9083 01 3 Performance 3.1 PinDescriptions 3.1.1PinDefinitionandFunctionDescription Figure3 Pinout Pin No. Pin Definition Function Description 1 VDD33 DC 3.3V Supply 2 USB_DM USB- 3 USB_DP USB+ 4 GND GND 5 GND GND 6 ANT ANT Rev1.
PAGE 5
FB 9083 01 3.2RFSpec. AllParametersarebasedonthetestresultofDUT,andtheambienttemperatureis+25℃. 3.2.1802.11bmode Spec IEEE802.11b DSSS/CCK DSSS/CCK Channel CH1toCH11 Phyrate 1,2,5.5,11Mbps TX Power Min. Typ. Max. Unit 17dBm 16.5 17.0 17.5 dBm Rev1.
PAGE 6
FB 9083 01 Mask@TargetPower fc+/-11MHzto+/-22MHz Pass fc>+/-22MHz Pass Freq.error Min. Typ. Max. Unit 8.0 5.0 4.8 kHz Sensitivitylevel Min. Typ. Max. Unit 1Mbps(FER≦8%) -98 97 -97 dBm 2Mbps(FER≦8%) -95 94 -93 dBm 5.5Mbps(FER≦8%) -93 92 -91 dBm 11Mbps(FER≦8%) -88 87 -87 dBm -8 6 -5 dBm Frequency error RX MaximumInputLevel(FER≦8%) 3.2.2802.11gmode Spec. IEEE802.
PAGE 7
FB 9083 01 Min. Typ. Max. Unit 6Mbps ‐33 -29 -29 dB 9Mbps ‐33 -29 -29 dB 12Mbps ‐33 -29 -29 dB 18Mbps ‐33 -29 -29 dB 24Mbps ‐33 -29 -29 dB 36Mbps ‐33 -29 -29 dB 48Mbps ‐33 -29 -29 dB 54Mbps ‐33 -29 -29 dB Min. Typ. Max. Unit 8.0 5.0 4.8 kHz FrequencyError Frequency error RX MinimumInputLevelSensitivity Min. Typ. Max.
PAGE 8
FB 9083 01 Spec IEEE802.11nHT20@ 2.4GHz Mode 11nHT20 Channel CH1toCH11 Phyrate(MCSindex) MCS0/1/2/3/4/5/6/7 TX PowerLevels Min. Typ. Max. Unit 15dBmTarget 13.4 13.8 14.6 dBm Mask@targetpower atfc +/-11MHz Pass atfc +/-20MHz Pass atfc> +/-30MHz Pass ConstellationError(EVM)@targetpower Min. Typ. Max.
PAGE 9
FB 9083 01 MCS1(PER≦10%) -88 ‐87 -87 dBm MCS2(PER≦10%) -87 ‐86 -85 dBm MCS3(PER≦10%) -84 ‐83 -82 dBm MCS4(PER≦10%) -81 ‐80 -79 dBm MCS5(PER≦10%) -76 ‐75 -74 dBm MCS6(PER≦10%) -75 ‐74 -73 dBm MCS7(PER≦10%) -74 ‐73 -72 dBm -8 ‐6 -5 dBm MaximumInputLevel(FER≦10%) 3.2.4802.11nHT40Mode Spec IEEE802.11nHT40@ 2.
PAGE 10
FB 9083 01 MCS4 ‐33 -30 ‐30 dB MCS5 ‐33 -30 ‐30 dB MCS6 ‐33 -30 ‐30 dB MCS7 ‐33 -30 ‐30 dB Min. Typ. Max. Unit 8.0 5.0 4.8 FrequencyError Frequency error kHz RX MinimumInputLevelSensitivity Min. Typ.
PAGE 11
FB 9083 01 RXMode 98 120 mA 71 IEEE802.11g Mode OFDM Frequency 2412~2462MHz Phyrate 6，9，12，18，24，36，48，54Mbps Min. Typ. TX Mode（@15dBm） 330 294 244 mA RXMode 157 107 89 mA State Max. Unit IEEE802.11n Mode OFDM Frequency 2412~2462MHz Phyrate 6.5，13，19.5，26，39，52，58.5，65Mbps Min. Typ. TX Mode（@14dBm） 320 282 234 mA RXMode 156 107 88 mA Max. Unit State Max. Unit Other Mode Condition Min. Typ.
PAGE 12
FB 9083 01 4 Interface Circuit Design Reference 4.1 WIFI RF Circuit Design Reference PIN6istheWIFImoduleofRFinterface,betweenthewiringwiththeantennaimpedanceis50Ω,recommend theuseofcurvesandlines,lengthasshortaspossible.PItypematchingnetworkisreservedanddesigned closetotheantennainterface,whichisspecificallyadjustedaccordingtotheactualmeasurementeffectof antennarecommendationandtypesettingdesign.
PAGE 13
FB 9083 01 5Antenna On-board Design Reference Rev1.
PAGE 14
FB 9083 01 6 PackageInformation FB 9083‐01Modulesize12.3mmx12.67mm，Thickness 1.6mm。Tolerance: +/‐0.15mm Rev1.
PAGE 15
FB 9083 01 7Reflow Soldering reflowsolderingProfile Heating Zone：temperature：<150℃，time：60～90 S, average slope：1～3℃/S. Preheating constant Temperature zone：temperature：150℃～200℃，time：60-120 S，average slope 0.3-0.8. Reflow Zone：Peak temperature： 235℃~250℃(Suggested Peak temperature＜ 245℃），time: 30-70S. Cooling Zone：temperature：217℃~170℃，average slope：3～5℃/S. Solders：Sn & Ag & Cu Lead-free solder (SAC305).
PAGE 16
FB 9083 01 ThisWi-FimoduleisLimitedmodule. Thismodulecanuseshielding methodstomeetthenecessaryrequirementstosatisfythemodulelimiting conditions. Information on test modes and additional testing requirements a) Themodulartransmitterhasbeenfullytestedbythemodulegranteeontherequirednumberofchannels, modulationtypes,andmodes,itshouldnotbenecessaryforthehostinstallertore-testalltheavailable transmittermodesorsettings.
PAGE 17
FB 9083 01 FCC Statement AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidthe user’sauthoritytooperatetheequipment. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired operation.
PAGE 18
FB 9083 01 Contact Window Shenzhen Farben information Technology Co., Ltd Add: 2nd Floor, 5B, Shenzhen Software Industry Base, Haitian 1st road, Science Park South District, Nanshan, Shenzhen, China Miss.Mu/Mr.Sun Mobile:13510537432Mobile:15019223031 Email:Joy.Mu@farbenelec.com Email:jason.sun@farbenelec.com Rev1.