USER’S MANUAL DMR Mobile Radio EM8100 VHF
Contents 3 GPS Positioning 14 RF Energy Exposure Information 4 DMR Trunking Functions and Operations 15 Operation Safety Recommendations 5 Private Call 15 Radio Saftety Information and RF Radiation Information 8 Group Call 18 Disabled Frequency 8 All Call 20 Packing List 8 Emergency Call 20 Important Information Before Use Ready to Use 9 9 Product Controls 10 LED Iindicator 12 Status Icons Functions and Operations 12 13 Operation Mode 13 Product Information Display 13 Tim
Contents MPT Trunking Functions and Operations Analog Conventional Functions and Operations 37 Private Call 26 DMO and RMO Mode 37 Group Call 28 Squelch level 37 All Call 30 Optional Accessories Emergency Call 30 Troubleshooting 39 Broadcast Call 30 Warranty and Maintains 40 Priority Call 30 Dispatch Station Call 30 MPT Pubic Network Call 30 Scope of Warranty Warranty Contents Non of Warranty 40 40 40 MPT-DMR Call 31 Emergency Warranty 31 Receiving and Responding to a Call
Important Information Note: Ic Note : Cet Appareil Est Conforme À La Partie 15 Des Règlements De La Fcc Et Aux Normes Rss De L’industrie Du Canada. Son Fonctionnement Est Soumis Aux Deux Conditions Suivantes : (1) Cet Appareil Ne Doit Pas Causer Des Interférences Nuisibles, Et (2) Cet Appareil Doit Accepter Toute Interférence Reçue, Y Compris Les Interférences Qui Peuvent Provoquer Un Fonctionnement Indésirable..
Important Information RF Energy Exposure Information RF Energy Exposure Awareness And Control Information For Fcc Occupational Use Requirements Ibefore using the two-way mobile radio, review the following important RF energy awareness and control information and operational instructions. Comply with this information and instructions in order to ensure compliance with RF exposure guidelines.e the capability to access information in that form.
Important Information Federal Communications Commission Regulations Before it was marketed in the United States, the Digital mobile radio was tested to ensure compliance with FCC RF energy exposure limits for two-way mobile radios. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements.
Important Information Transmitter Hazards ! The operator of any mobile radio should be aware of certain hazards common to the operation of vehicular radio transmissions. Possible hazards include but are not limited to: WARNING • Explosive Atmospheres — Just as it is dangerous to fuel a vehicle while its engine is running, be sure to turn the radio OFF while fueling the vehicle. If the radio is mounted in the trunk of the vehicle, DO NOT carry containers of fuel in the trunk.
Important Information · Vehicles Equipped with Airbags — For driver and passenger safety,avoid mounting the radio’s control head (or any other component) above or near airbag deployment areas. In addition to driverside and passenger-side front-impact airbags, some vehicles may also be equipped with side-impact airbags. For occupant safety, verify the location of all airbags within the vehicle before installing the radio equipment .
Important Information Please read this manual carefully before use. Alert Icons Packing List Please unpack carefully and check that all items listed below are received. If any item is missing or damaged ,please contact your dealer. Caution:Indicates situations that could cause body injury or damage to your products. Note Indicates tips that can help you make better use of your products. Palm Microphone Radio Disabled Frequency 360.670MHz 364.800MHz 384.
Before Use Installation Schematic Drawing： No. 8 10 7 6 5 4 3 2 1 1 2 3 4 5 Parts Name Bracket Locking Knob Screws Radio Antenna 6 7 8 9 Palm Microphone Jack 10 Fuse Power Inlet GPS Antenna Power Box 1.Install the bracket on both sides of Radio with screws and lock knobs. 2.Plug the palm microphone into radio assigned Plam Microphone Conector. 3.Plug the antenna into the back of radio assigned connector. 4.Plug the GPS antenna into the back of radio assigned connector. 5.
Before Use Products Control No. Part Name Microphone Connetor TK Key Volume Control/Channel Selector Knob LCD Display P3 Key/Called Key/Calling Key No. Part Name Setting Key P4 Key/Hangup Key/Home Key Up/Down Key No.
Before Use Microphone Control No. Part Name Part Name Microphone Microphone Fixed Button Menu Key PTT Key P1 Key P2 Key 11 No. Microphone Fixed Bracket Called/Calling Key【P3】 Numeral Key Up/Down Key No.
Before Use LED Indicator LED Indicator Status Icon Icon Radio Status Icon Name LED flashes green slowly. Standby(no load) Signal Strength Icon LED flashes green rapidly. Upgrading or powering on LED glows green. Receiving New Message Icon , Inbox Icon is full LED flashes red rapidly. Reserving LED glows red. Transmitting LED flashes orange slowly. Scanning LED flashes orange rapidly. Reserving LED glows orange.
Product Function and Operations Operation Mode This radio supports three operation Mode :DMR Trunking mode,MPT Trunking mode and Conventional mode(Digital and Analog).Switching Methods: Time and Date Display Setting Use this function to modify this radio Date and Time. Press “Setting”Key to access “Radio Setting”-“Date and Time”interface to modify the Date and Time.
Product Functions and Operations Programming Key You are available to set the keys P1,P2,P3,P4,Up,Downand TK key as the shortcuts,such as High Power and Low Power switching and Zone Up and Zone Down, Squelch and Scan . This function only via the programming software setting. High Noise Reduction This function will effective reduce the noise under the high noise conduction. The noise reduction reach 25dB and makes voice will be clear.
Product Functions and Operations Note: To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5 to 5cm from your mouth. Private Call Under DMR trunking mode, to set Private Call type via trunking system. FOACSU and OACSU ●FOACSU: While seting up a call,ring warn the calling party, and the called party receive the call through manual operation. ●OACSU : While seting up a call without any ring warn for the calling party ,and the called party receive the call automatically.
Product Functions and Operations Receiving and Responding to a Private Call When a Private Call is received ,your radio automatic to receive a Private Call and sounds “De,De”,your radio will display the icon (As shown above) . You may press P3 key or PTT key, the incoming call ring and icon will disappear ,the first line display the incoming call alias or ID. (As shown above) Note:No need press the Receiving Key while setting automatic receiving and responding to a Private Call .
Product Functions and Operations Current Channel Display ● Display radio channel After initiating a call application ,LCD will display master control channel of radio registered base station before setting up voice communication. ● Display operation channel After setting up a call， LCD will display the operation channel of the current base station occupied. 17 Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires. 2.
DMR Functions and Operations Group Call Receiving and Responding to a Group Call You may transmitting a Group Call through any of the following methods. Transmitting a call to the preset contacts. In the home screen,hold down PTT Key to transmitting a Group Call to the Group Call Contacts preset for the current Channel. (By the Group Knob to select a group you want to call). Transmitting a group call to the contacts List or Call Logs. 1.Press Menu Key to Main Menu 2.
DMR Functions and Operations Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is “Minutes :Seconds.”(As shown below) ● The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration .
DMR Functions and Operations Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when the time expires silence period . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, the calling party hang up. 4.Basestation signal lost. All Call Two types of All Call are Team All Call and Whole Network All Call.
DMR Functions and Operations Receiving and Responding to a Group Call Dispatch Station Call This radio can call the Dispatch Station.The number of Dispatch Station are based on configuration. When a Private Call / Group Call is received under trunking mode,your radio will set up calling automatically and have one "De"alert tone. DMR Republic Network Phone Call The calling with Public Network Phone is called Public Network Call. Network Phone Call have fixed phone call and mobile phone.
DMR Functions and Operations Private Call Contacts You can save up to 256 entries in the private Call Contacts list . To access this item, select"Contacts-Private Contacts" or through Private Call List shortcut key for the contacts list via CPS configuration. a) To review ,modify or delete any one of contacts on list. b) If you want to delete all contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All" Group Call Contacts You can save up to 256 entries in group Call Contacts list .
DMR Functions and Operations Inbox The Inbox can save up to 100 received messages.When the Inbox save up to 90 received messages ,and go on receiving messages ,radio will appear notes “Inbox will be full, please delete message”and the earliest message will be overwritten by the latest one automatically. Outbox The Outbox can save up 100 sent messages. Each message will appear appropriate Iron to note message send successfully or not . a) When the message sent successfully, the icon"√"will appear.
DMR Functions and Operations Redail List All outgoing call list will be save in the Redial List . To access this item,Use P3key in home screen (As shown) . Use P3 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . Vehicle Inquiry To access this item ,press Menu Key to access Main Menu to select “Applications --Information Inquiry". You can input the vehichle license number and sent it to dataspace when you want to inquiry it .
DMR Functions and Operations You can input ID number to the ID editing interface and sent it to dataspace when you want to inquiry it .You also can review it from the history record. Status Filing Press Menu Key to access Main Menu to select “Applications—Status Filing”. Roming The radio signal strength are not strong enough to sure seamless communication. To ensure no any break communication to rome one base station to another base station . To enable this function, set in CPS as below : 1.
MPT Trunking Functions and Operations To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5to 5 centimeters away from your month . Receiving and Responding to a Private Call Private Call Transmitting a Private Call You may transmit a Private Call through the following methods. When transmitting a Private Call ,this radio will set up calling automatically . Transmitting a call through Contacts and Call Logs 1.Press Menu Key to go to Main Menu 2.
MPT Trunking Function and Opertaions Call Duration After setting up a Private Call ,Both the calling party and called party LCD will display call duration in time .Unit is “Minutes :Seconds”. (As shown below) Communication Channel Display ● Display master control channel After initiating a call application ,LCD will display master control channel of radio registered base station before setting up voice communication.
MPT Trunking Function and Opertaions Group Call Receiving and Responding to a Group Call You may transmit a Group Call through any of the following methods. Transmit a call to the preset contacts. Hold down PTT Key to transmit a Group Call to a Group Call contacts preset for the current channel in home screen. (By the Group Knob to select a group you want to call) Transmitting a group call to “Contracts List--Contacts ” 1.Press Menu Key to Main Menu 2.Go to“Contracts List--Contacts ” 3.
MPT Trunking Function and Opertaions Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is “Minutes :Seconds.”(As shown) Communication Channel Display ● Display master control channel After initiating a call application ,LCD will display master control channel of radio registered base station before setting up voice communication.
MPT Trunking Functions and Operations All Call Two types of All Call are Team All Call and Whole Network All Call. Team All Call 999is the last one Group Call number in this team ,When you initiate a team All Call,all member in this team will receive and respond to this call . Three methods are aviaible for transmitting a Team All Call : Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number .
MPT Trunking Functions and Operations MPT-DMR Call Base on the appropriate MPT-DMR Group Call number configurated by base station ,you can achieve MPT trunking radio cal DMR trunking mode radio each other. MPT trunking radio transmit a MPT-DMR call In MPT trunking mode ,you may transmit a MPT-DMR Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input.
MPT Trunking Functions and Operations Call Logs Redail List All outgoing call list will be save in the Redial List . Use P3 key to access this item in home screen. (As shown) Use P4 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . This radio can save up to 200 call entries.When the entries list is full,the earliest entry will be over written by latest one automatically. To view, delete, or delete all after selecting one call entries .
MPT Trunking Functions and Operations Manual Input to Temporary Group For temporary or quicker dispatch and command one group, to call the group number by manual input. Group Call Contacts List will add the temporary group and add it to the current group automatically after ending the call .The temporary group will delete automatically after restarting. Caution! To enable this function ,must select “Manual Dial Temporary Group”in CPS.
Digital Conventional Functions and Operations Private Call,Group Call and all Call Transmitting a Private Call You may transmitting a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs. 1. Go to"Contacts List-Contacts ",Or go to "Call Logs" and access to the Outgoing/Incoming/Missed list. 2.Use Up /Down Key to select a Private Call Contacts you want to call. 3.Hold down PTT Key to transmitting a Private Call through manual input 1.
Digital Conventional Functions and Operations Message To access the Menu,press Menu key to go to Main Menu to select“message”. b, When the message sent unsuccessful, the icon"！" will appear and please send again. The Outbox can save up to 100 sent messages. When the Outbox is full, the earliest message will be overwritten by the latest one automatically. Drafts This radio can save up the edited message into Drafts. The Drafts can save up to 10 draft message .
Digital Conventional Functions and Operations Call Logs To access this menu,press Menu key to Main Menu and select"Call Logs,or press the shortcut key for Call Logs directly. This radio can save up to 200 call entries.When the entries list is full,the earliest entry will be overwritten by latest one automatically. After accessing a list and selecting an entry ,you can perform any of these operations:hold down the PTT key to initiate a call, add it to Contact List ,or delete it .
Analog Conventional Functions and Operations DMO and TMO This radio supports DMO and TMO DMO:Set all radio transmitter and receiver at same frequency via CPS configuration. Under this mode ,radios communicate with each other directly. TMO :Set all radio transmitter and receiver at different frequency via CPS configuration. Under this mode , radios communicate with each other via a repeater. Squelch Level You can select the squelch Level by menu from Strengthen , Normal and Always On .
Optional Accessories The following items are the main optional accessories for the product. Consult your local dealer for more other accessories. GPS Antenna EAS157501 Palm Microphone with Keypad EMKA011 Sucker Antenna Power Supply EEPS01 Wireless PTT EPTTB01 Bluetooth Headset EEWB03E Vehicle Remote Control Head Mount Kit ERC01 Programming Cable EPC02 Motorcycle Remote Control Head Mount Kit ERC02 Caution: Use the accessories specified by the Company only.
Troubleshooting Phenomena Solution Analysis The battery may be improperly installed Remove the battey and attach it again. The battery may run out Recharge or replace the battery The battery may suffer from poor contact caused by dirtied or damaged battery contacts Clean the battery contacts,If the problem can not be solved,contact your dealer or authorized service center for inspection and repair. The radio can not detect the basestaion signal.
Warranty and Maintains Scope of Warranty EM 8100 Digital Radio and Acessories. Warranty Contents 1.From the date of purchase and without any artificial damage, Warranty varies based on product types . We will provide 36 months warranty service for main radios and 12 months warranty service for battery ,charger ,adapter and other standard accessories etc. 2.Completes Warranty Card or provides valid original invoices or receipts for warranty judgment .
Disclaimer The company endeavors to achieve the accuracy and completeness of this manual,but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied ,modified,translated,or distributed in any manner without the express written permission of us.
This equipment complies with FCC RF exposure guidelines. This equipment should be installed and operated with minimum distance 100cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
