Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 Elevator Control System User Manual Document No:APN0000238V0.3.1 Product UDE07XX Model Subsystem name and model Module name Doc.#: #: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 Revision History Revision Initiator Revision Reviewed Approve Description by d by Issue Date Eileen Zhou V0.1.1 Fish Yu V0.2.1 Alex Qin Initial version Johny Wu Added FCC Eileen Zhou Warning Information Johny Wu John Gu 2022-05-13 John Gu 2022-07-15 John Gu 2022-07-28 Deleted Footer of “Excelland Eileen Zhou V0.3.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 Introduction of Elevator Control System The elevator control system consists of five parts: main control box of elevator control system, floor counting device of elevator control system, floor calibration device of elevator control system, wireless transmitting and receiving device, and key expansion device.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 2. Main Control Box of Elevator Control System The main control box contains two important units: 1. Main control board of elevator control system; 2. Wireless module #2 RS485_2 interface: This interface is connected to Interface RFID RS485. #3 24V power supply interface: Connected to a 24V adapter.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 Line length of about 1.5m RFID installation instructions: RFID supplies power through red line VCC and black line GND, and communicates through blue line 485a and white line 485b 3.1.1 Installation Description of RFID Doc.#: #: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 In order to ensure normal and stable operation of the equipment and your personal and property safety, please carefully read the following notes before installing RFID integrated reader: 1. Please disconnect the power supply before wiring and do not operate with electricity 2.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 (2) Using two U-bolts and two toothed installation bracket to fix the reader on vertical rod through the L-bracket, refer to Figure 3-2. Note: This installation method is suitable for cross bars with a diameter of 30mm~50mm. Figure 3-2 Horizontal pole installation 3.1.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 Figure 3-4 Vertical pole installation 3.2 Floor Calibration Device of Elevator Control System 1. Hall Sensor Doc.#: #: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 Hall Sensor FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules.
Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc Document Security Level: Level 2 radio communications. However, there is no guarantee that interference will not occur in a particular installation.