User's Manual

Wireless Phone Tripod

RPT201

User’s manual

Step 1. Pairing:

A. Turn the remote on with the power switch located at the side, The blue LED light will

flicker

B. Turn on your phone’s Bluetooth setting & connected to “AB Shutter3” in the available

devices list, The blue LED light will stop flickering when connected

Step 2. Using:

Open your phone’s camera app, Press the button associated with your phone’s operating

system (iOS for iphone, Android for Android phones)

Note: if your camera does not respond it may not be compatible, in this case, download

the free app “Camera 360” and use this camera app with the remote.

Step 3. Filming Videos:

Switch your phone’s camera into Video mode first, Press the button to start/stop record

videos, Note for Samsung Cell Phones:

1. Go to camera setting, Scroll down and tap “Volume keys function” and choose “record

video”.

2. Open the native camera, click the iOS button （Not android）to start the video, click

again to stop the video.

PAGE 1
Wireless Phone Tripod RPT201 User’s manual Step 1. Pairing: A. Turn the remote on with the power switch located at the side, The blue LED light will flicker B. Turn on your phone’s Bluetooth setting & connected to “AB Shutter3” in the available devices list, The blue LED light will stop flickering when connected Step 2.
PAGE 2
Specification: Communication: Bluetooth 4.2 Frequency: 2.4 GHz-2.4835 GHz Max Range: 30ft(10m) Battery Life: Approx 6 months using 10x/day Dimensions: 48mm*30mm*10mm Weight: 8g Compatible with: Android 4.2.
PAGE 3
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
IC warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.