User's Manual

Meeting room interactive digital signage
10.1" Exterior Components
User Manual
Package Contents
Please make sure all of the following are present when you unpack your meeting room
interactive digital signage.
User manual Bracket/ ScrewPower adapter
Power button
Ethernet with PoE
1
2
8
9
No No
Function Function
Speaker
VESA 75*75MM
Camera
3.5mm audio jack3
4
5
6
7
10
11
12
Recovery key
SD Card slot
DC in power supply port
Micro USB OTG
2 4 6 8
3 5 7 9
10
11
12
1
273,7mm
189,7mm
217,4mm
136,4mm
Introducing the Meeting room interactive digital
signage 10.1"
*If required, please ask for detailed specifications.
LCD panel
10.1" Resolution:1280*800
RK3566 Quad core cortex A55
RAM 4GB
Internal memory 16GB / Optional 32GB/64GB
Android 11
10-Point capacitive touch
Wide-angle camera（2.0M/P ）
WiFi 802.11 b/g/n
Ethernet interface ( POE function standard IEEE802.3at,POE+,class 4， 25.5W )
Bluetooth 5.0
USB for serial (TTL Level RK3566)
USB 3.0 host
3.5mm earphone + Microphone
Micro USB OTG
SD card ,Max support to 64GB
Microphone
2*2W Speaker
LED light bar RGB
Important Notices
Copyright Information
All intellectual property rights in this publication are owned by and protected by
applicable copyright laws and international treaty provisions. retains all rights not
expressly granted. No part of this publication may be reproduced in any form
whatsoever or used to make any derivative work without prior written approval by .
Reserves the right to revise this publication, and/or make improvements or changes
in the product(s) and/or the program(s) described in this documentation at any time
without prior notice. The information in this document is provided in good faith, but
without any representation or warranty whatsoever, whether it is accurate,or complete
or otherwise, and on express understanding that shall have no liability whatsoever to
other parties in any way arising from or relating to the information or its use.
All other trademarks are the property of their respective owners. Other company and
brand products and service names are trademarks or registered trademarks of their
respective holders.
1)Do not push objects into holes and ventilation slots.
Do not expose this product to moisture or place any objects filled with liquids on or near
the product.
Do not place a naked flame source, such as lighted candles, on or near this product.
Do not store or operate the device in environments where the temperature is above 50
degrees celsius or below -10 degrees celsius.
Do not intentionally hit the device or place heavy or sharp objects on the device.
Only use accessories specified by the manufacturer.
Keep the device away from benzene, diluents, and other chemicals.
Do not attempt to repair this product yourself. Always use a qualified sevice agent to
perform adjustments or repairs.
This product is a desktop/wall-mounted product, people will not just use it in their hands.
MEETING ROOM
INTERACTIVE DIGITAL SIGNAGE
Installation instructions
1 2
5
6
3 4
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed of at the end of its life separately from your household waste.
There are separate collection systems for recycling in your country. For more information,
please contact the local authority or your retailer where you purchased the product.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equip ment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protectionagainst harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits setforth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
USB 3.0 host
USB for serial(TTL format)
RK3566
SIZE:130x185MM 材质：80G书写纸黑白印刷 折页
User Manual
MEETING ROOM
INTERACTIVE DIGITAL SIGNAGE