Multi-Functional Mobiles Remote Work for iPhone or for iPad (iOS 6.0+) Please Read Me. . .
Bluetooth Pairing £= Blusterous Shutting Heb Le BE Contraction Sleaze EY Tums 1. Turn on this Bluetooth Remote. 2. Turn on Bluetooth on your cellphone. 3. Scan to find "DY-Remoter” then pairing with it.
e Book Remoteness Remote e Book apps {Applicable apps: Kindle, Aldo Book Reader, Al Reader etc.) 1. Open an “e Book” app on cellphone. 2. Press “Left” or “Right” button to turn the page. (Note: for some e Book apps, you need to press “Up” or “Down” button to turn the page.) PPT apps {Applicable apps: MS PowerPoint, Google Slides, Acrobat, Keynote, AC 1. Open a “PPT” app on cellphone. 2. Press “Left” or “Right” button to slide the page.
Camera Remote 1. Open "Camera" on your cellphone. 2. Hold on "Left" or “Right” Button for 3 seconds to take photo/take video. 3. When taking video, if you want to stop recording video, press "Left” or “Right” button for 3 seconds again. Note: If "Left" or “Right” button NOT work, try as below: 1. Hold on the “Shutter Button”, then press the Up/Down/Left/Right to adjust the dot pointer to Camera button. 2.Then you can just press “Shutter Button” to take photo or take video.
Ticktock Remote Notelet is important!!! | TRACKING SENSITIVITY) 1.please make sure turn “on” the Assistive Touch in Phone, 2. Ajust the TRACKING SENSITIVITY TO 50%. Without the above two selling: can NOT work on Identikit 1. Open "Ticktock" app . 2. Press "Left" or “Right” button to select the tab. 3. Press "Up" or "Down" to scroll up/down videos. 4. Press "Function Button” to Play/Pause video. 5. Double-click "Function Button" to thumb-up video. 6. Hold on "Right" / "Left" to do the Volume Control. 7.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.