Quick Installation Guide
la
authority
accept
01. Put in the CD and find windows file “windows
(xp,vista,win7,win8,win10)” andSetup.exe.
02. Double clic
k
Setup.exe file, Software begin to
initialization,th
e
n click the “Next”.There shows the
installation pro
gress.
03. Do not interrupt installation, Click “finish” to finish the
driver installation.The computer automatically restart.
Wireless connection (two ways to realize
Wireless connection 1：
04.Plug the Wireless USB Adapter into the USB port of
your PC
05.Click Icon in the Windows system tray, which
locates in the bottom-right corner of your computer screen
or double clic
k , and pops up a message and
click”Available Network” Double-click the utility icon or right
click the icon ,and the Wireless Network Connection
window appears then double click the SSID you preferred.
1 2 3 4 5
Note：This Manual based on Windows7
6
7 8 9
10 11 12 13
Note:if there is no icon , please find it in the on right
buttom,it have been hide as following
pictures shows:
Wireless Connection2.
06. Click Icon which locates in the bottom-right
corner of your computer screen,click the wireless network
list and choose the SSID you preferred. and double click
(Or click “Connect”).
Type the encryption key and then click “ok”.
Type the encryption key that you wrote down
earlier in both the Network key and Confirm
network key boxes, and then click “ok”.
USB Wireless Adapter
Quick Installation Guide
802.11AC Dual-Band Wi-Fi USB Adapter
Model: EP-AC1619
Shenzhen EDUP Electronics Technology Co.,Ltd.
ComplianceInformation
FCC/ISEDCComplianceNotice
This device complies with Part 15 of the FCC Rules and
ISEDC
licence‐exemptRSSstandard.
Operation
is
subject
to
the
following
two
conditions:
(1)
This
device
maynotcauseharmfulinterference,and(2)This
device
must
any
interference
received,including
interferencethat
maycause
undesiredoperation.
Anychangesormodificationsnotexpresslyapprovedbythe
party
responsiblefor compliance couldvoid the user’s
to
operate
theequipment.
Cetappareilestconformeàlapartie15desrèglesdelaFCC
etàla
normeRSSexonéréedelicenceISEDC.
L’opération est soumise auxdeux conditions suivantes: (1)
cetappareil
nepeut pascauserd’interférencesnuisibles,et
(2) cet appareil doit
accepter toute interférence reçue, y
comprislesinterférences
qui
peuvent causer un
fonctionnementindésirable.
Tou te modification ou
modification non
expressément
approuvée
par
la
partie
responsable
de
conformité
pourrait
annuler
l’autorisation
de
l’utilisateur
d’utiliser
l’équipement.
This
device
has
been
tested
and
found
to
comply
with
the
limits
for
a
ClassBdigitaldevice,pursuanttoPart15ofthe
FCC Rules. Theselimits
aredesigned toprovidereasonable
protection against harmful
interferencein a residential
installation. This equipment generates,
uses
andcan
radiated radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful
interference to radio communications. However,
there is no
guarantee that interference will not occur in a
particularinstallation
Ifthisequipmentdoescause harmful
interference to radio ortelevision
reception,which can be
determinedby turningthe equipmentoffand
on, the user
is encouraged to try to correct the interference by one or
moreofthefollowingmeasures:
‐Reorientorrelocatether
eceivingantenna.
‐Increasethe
separation
betweenthe equipment and
receiver.
‐Connectthe equipment into an outlet on a circuit
differ
entfrom
thattowhichthereceiverisconnected.
‐Consultthedealeroranexperiencedradio/TVtechnician
forhelp.
Before a new model adapter is a available for sale to the public, it
must be tested and certified to the FCC/ISEDC that it does not
exceed the exposure limit established by the FCC/ISEDC, Tests for
each adapter are performed in positions and locations as required
by the FCC/ISEDC.
For body worn operation, this adapter has been tested and meets
the FCC/ISEDC RF exposure guidelines when used with an
accessory designated for this product or when used with an
accessory that contains no metal and that positions the handset a
minimum of 5 mm from the body.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted
by the FCC/ISEDC with the adapter transmitting at its highest certified
power level in all tested frequency bands, although the SAR is
determined at the highest certified power level, the actual SAR level of
the adapter while operating can be well below the maximum value, in
general, the closer you are to a wireless base station antenna, the
lower the power output.