Instruction Manual

ManualsBrandsSHENZHEN ECARE ELECTRONICS ManualsElectronicsIndoor/Outdoor humidity&Temperature Monitor

WIRELESS INDOOR/OUTDOOR HUMIDITY AND TEMPERATURE MONITOR

INSTRUCTION MANUAL

Model No. TX-2B

Introduction

Congratulations on your purchase of the wireless indoor/outdoor temperature monitor. You will now be able to

know the outdoor/indoor temperature while sitting inside.

Components

1. One base station unit (Receiver)

2. One remote sensor (Transmitter)

3. Four AAA size batteries (included)

* Although the remote sensor is designed to be rain-proof, the remote sensor must be always placed

upwards so that rain won’t get inside the sensor through the vent holes on the bottom of the senor

which functions to let the remote sensor detect the environmental temperature more precisely and

quickly.

Indoor Base Station (Receiver) Features

1. LCD display: Displays the current outdoor temperature and indoor temperature

2. Battery Compartment: Holds 2 AAA batteries to power the unit

3. Tabletop and wall-mounted design

4. Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C).

5. Temperature display unit: °C and °F selectable

Summary of content (6 pages)

PAGE 1
WIRELESS INDOOR/OUTDOOR HUMIDITY AND TEMPERATURE MONITOR INSTRUCTION MANUAL Model No. TX-2B Introduction Congratulations on your purchase of the wireless indoor/outdoor temperature monitor. You will now be able to know the outdoor/indoor temperature while sitting inside. Components 1. One base station unit (Receiver) 2. One remote sensor (Transmitter) 3.
PAGE 2
6. Temperature Resolution: 0.1 °C/°F 7. Low battery indication Buttons CHANNEL/SYNC: Press once to display the temperature readings from up to 3 outdoor remote sensors; Press and hold this button to enter the synchronization mode. °F/°C/: Press to select the temperature display in ºC or ºF. Outdoor Remote Sensor (Transmitter) Features 1、Battery Compartment: Holds 2 X AAA batteries to power the unit 2、 Rain-proof and wall-mounted design 4.
PAGE 3
2. Slide the channel selector switch inside the battery compartment to your desired channel. For the first remote you may select any channel, for additional remotes select any unused channel; 3. Insert (2) AAA batteries according to the polarity markings. Replace the battery compartment cover . 4. Open the battery compartment at the back of the base station and insert (2) AAA batteries according to the polarity markings. Replace the compartment door; 5.
PAGE 4
6. If you have registered more than one sensor, press the CHANNEL/SYNC button on the base station to select the remote channel you want displayed permanently on the base station. Press CHANNEL/SYNC button until you observe a circular arrow on the base station LCD display under the channel number. The unit will then auto-scroll, changing from channel to channel every 5 seconds. Place the Base Station and Remote Sensor 1.
PAGE 5
Specifications 1. 433 Mhz transmission frequency 2. Transmission range up to 200 ft. (range maybe shorter based on interference present) 3. Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C) 4. Outdoor Temperature range: -58°F ~ 158°F (-50 °C ~ 70 °C) 5. Temperature tolerance: +/- 2.0 °F (+/- 1.1 °C) 6. Power: 2 X AAA 1.5V for base unit and 2 X AAA 1.5V for remote sensor FCC STATEMENT OF COMPLIANCE This device complies with Part 15 of the FCC rules.
PAGE 6
CUSTOMER SERVICE Telephone: 1-877-515-7797(USA & Canada only) Email: service@buythermopro.