Installation Instructions

960-V20220414 EN
Truly Wireless Bluetooth
Meat Thermometer
iOS
Android
According to the operating system of your mobile,
scan the following QR code to download and install.
-1- -2- -3-
1. Introduction
2. Features
Congratulations on your purchase of a Smart, Wireless
Bluetooth-connected Cooking Thermometer: TempSpike. You will
now be able to remotely monitor the internal food temperature and
ambient temperature and how much time is left for the food to be
done from your smart device.
recharged. When the booster is being charged, the light will flash
slowly. Once the booster is fully charged, the light will be off.
1. Booster: receives the temperature signal from the probe and
boosts and transmits it to the smart device. It also serves as a
power source to charge the probe.
3. Probe Battery Power Indicator: When it flashes quickly, it
indicates the probe battery power is low and needs to be recharged.
When the probe is being charged, the light will flash slowly. After the
probe is fully charged, the light will be off.
2. Probe: inserted into meat and measures the meat internal
temperature and ambient temperature, IP67 waterproof.
4. Booster Battery Power Indicator: When it flashes quickly, this
indicates the booster battery power is low and needs to be
Probe Battery
Power Indicator
Sensor for Ambient
Temp
Sensor for Internal
Temp
Booster Battery
Power Indicator
Probe
S button
USB Charging
Port
Notch
Connection
Indicator
Booster
6. Notch: When the probe is inserted into meat for measuring the
meat’s internal temperature, the probe must be inserted deep
enough so that the meat will cover this notch.
8. USB Charging Port (Type C)
9. Sensors: Dual temperature sensors can monitor internal meat
temperature up to 212°F and ambient temperature up to 527°F
simultaneously.
7. S button: Serves 3 functions:
Press once to silence the booster’s alarm when the meat tempera-
ture reaches the target temperature;
Press and hold for 3 seconds to pair the booster and the probe;
Press and hold for 10 seconds to reset the booster.
5. Connection Indicator: If the probe and the booster are connected,
the indicator will flash green slowly. If the probe losses connection
with the booster, it will flash red slowly. When the probe is placed in
the booster for charging and storage, the light will be off.
1 x Probe
1 x Booster
1 x Cover
1 x USB Charging Cable
1 x Manual
3. Components
Step 1: Download and install the “TempSpike” App.
4. Usage
Follow the simple steps below to set up your TempSpike and help
you Cook Like a Pro!
Scan the QR code above, or search for “TempSpike” on the Apple
Store for iOS devices or on the Google Play Store for Android
devices. Download the App and install it on your smart device.
*iPhone and iPad Apps for iOS 9.0 and above.
*Android App for versions 4.4 and above.
*Android users need to allow all the requests about this App from