Users Manual

ManualsBrandsSHENZHEN ECARE ELECTRONICS ManualsElectronicsTemperature Monitor

ThermoPro

Remote Food Thermometer with Four Probes

Model No. TP-27

Cook Like A Pro Every Time!

Introduction

Congratulations on your purchase of the Professional Remote Food Thermometer, a programmable radio frequency

food thermometer. You will now be able to remotely monitor the temperature of cooking food and the temperature

inside your grill, oven or smoker from anywhere in your home.

Components

1. One receiver unit.

2. One transmitter unit.

3. Four detachable stainless steel probes with steel mesh cable.

4. Four AAA batteries.

Transmitter Features

1. LCD (Liquid Crystal Display) – Displays all icons, temperature

2. Low battery Indicator

4. Remote range: 300FT

5. IPX4 Waterproof

6. Touch Backlight

7. Temperature Alarm

8. Four probes

9. Temperature range of probe: 14˚F to 572˚F (-10˚C to 300˚C)

10. Tabletop, magnet and wall-mounted design

11 .All four probes can be selected for MEAT or BBQ

12. Battery: 2*AAA batteries, 3.0V

Summary of content (4 pages)

PAGE 1
ThermoPro Remote Food Thermometer with Four Probes Model No. TP-27 Cook Like A Pro Every Time! Introduction Congratulations on your purchase of the Professional Remote Food Thermometer, a programmable radio frequency food thermometer. You will now be able to remotely monitor the temperature of cooking food and the temperature inside your grill, oven or smoker from anywhere in your home. Components 1. One receiver unit. 2. One transmitter unit. 3.
PAGE 2
Buttons 1. BBQ/MEAT – Press to display HI, LO or MEAT. 2. ALARM/℉/℃: Press once to turn on/off the alarm; Press and hold for 3 seconds to switch ℉ and ℃. 3. ▼: Press once to decrease the temperature setting, press and hold for 3 seconds, temperature will decrease at a faster pace. 4、PROBE: Tap to select four probes’ temperature, when you press the button, you will see the display flashing. Hold for 3 seconds to turn on/off the Alarm of the probe.
PAGE 3
Buttons 1. ON/OFF/RESYNC: Tap to turn on/off the receiver; Press and hold for 3 seconds to enter the Synchronize/Pair process. 2. ALARM – The audio alarm mode is enabled by default when the power is on， Click once to switch vibration mode、Click again to turn on the sound and vibration modes、Press again to turn off alarm mode。 3. LIGHT: Touch to turn on/off the backlight. Backlight will auto-off after 15 seconds of inactivity.
PAGE 4
temperature to the receiver every 12 seconds. 11. Once the temperature of meat reaches the preset temperature, both the transmitter and receiver will beep and the LCD backlight will be turned on, the corresponding probe temperature flashes. Press any button to stop the beep. Note: Explanation of the ALARM of HI and LO setting 1. The alarm will not be activated if the current temperature is below the LO setting or above the HI setting.