Table of Contents: Important Safety Information....................................................................... 2 Components.............................................................................................. 3 How the dog training system works?.............................................................4 Important Safety Information WARNING: NOT FOR AGGRESSIVE DOGS.
Components: PET619-1(1 for 1) How the dog training system works? iPets products are reliable, effective, and comfortable for large or small dogs. The system assists in controlling your dog without a leash in a range up to 330 yards away! Instantly send a signal from the Remote Transmitter, which activates your dog's Collar Receiver. The dog will receive an annoying but safe, harmless stimulation.
Collar Receiver Key Definitions Antenna Metal Probes Charging Hole Rubber Cover LED indicator 1-100 level Static shock mode Charging hole Vibration mode ON/OFF/Encode Button Channel button Beep mode 1. ON/OFF Button: Powers on/off the Collar Receiver and used for Pairing or Synchronization of the Collar Receiver to the Remote Transmitter. 2. Electrodes: Contact points cover the electrodes, and through them electronic pulse stimulation is delivered. Remote Transmitter 1.
3. Press any button on the transmitter once the Collar Receiver beeps. When the Remote Transmitter and Collar Receiver are paired successfully the indicating will stop flashing quickly. 4. If needing to pair a second Collar Receiver, follow the same steps but first push your Toggle Switch in the other direction. Note: Before first use, charge the Remote Transmitter and Receiver Collar until completion. Powering on and off the Remote Transmitter There is no need to turn off the transmitter.
Note: If wanting to test the shock function on yourself, please ensure your finger or hand is across both contact points to ensure the connection is complete. Otherwise, user will feel no stimulation. Testing the Vibration Functions 1. Ensure the Toggle Switch is in the correct position for the Collar Receiver you're testing. 2. Adjust the Intensity Dial off of 100. 3. Press the Vibration Button on your Remote Transmitter. 4. If done correctly, the Collar Receiver will vibrate.
CAUTION: RISK OF SKIN DAMAGE For comfort, safety and effectiveness of this product please check the fit of the dog's collar frequently. If observing any skin irritation, immediately discontinue use of the collar for a few days. If the skin condition persists beyond 48 hours, consult a veterinarian. These collars can cause pressure necrosis, commonly known as bed sores, if used incorrectly and is often misidentified as burns.
How long can I leave the Collar Receiver on my dog? The design of the collar discourages constant wearing. We recommend not having the dog wear the collar for more than 12 hours out of every 24-hour period. General Training Tips: Is the training system suitable for all dogs? The collar is adjustable from length 5.9” (15cm) to 19.6” (50cm), if the dog's neck circumference is smaller than 5.
Common size of different dogs Size Neck (cm) Chest Measurement (cm) Back Length (cm) Type Mini 20-22 25-30 19 Chihuahua, Yorkshire Termier Small 20-24 29-36 23 Chihuahua, Yorkshire Temier, Poodle, Pomeranian Medium 23-28 35-42 28 Maltese Dog, Shih Tzu Large 27-31 41-47 31 Miniature Schnauzer, Pekingese large 30-34 46-53 35 Schnauzer, English Cocker Spaniel Large 33-37 52-59 40 Beagle Huge 43-48 76-84 60 Husky 47-52 88-97 65 Labrad or Retriever 52-62 92-110 70 G