user's manual Selfie Artifact Model: R10 ,QGLFDWRU OLJKW Camera button
Instructions： 1. Press and hold the device button for 3 seconds, the indicator light flashes blue once, and the device is turned on. 2. Turn on the phone's Bluetooth, search for the device, device name (camera remote control). 3. After pairing and connecting the device, turn on the camera of the phone, and then you can control the phone to take pictures or record videos through the buttons of the device. 4. Press and hold the button for 3 seconds, the blue light flashes 3 times, and the device shuts down.
Specification 1.Charger: Input: DC 5V from Adapter For battery: 3.7VDC 2.Maximum power: 1.45mW 3.Operating frequency range: 2402-2480MHz 4.Hardware Version: EF-CRC-V1.0 5.Software Version: V5.1 Attention 1.Avoid soaking or splashing. 2.Do not put into fire. 3.Do not disassemble.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
