Specifications

ManualsBrandsShenzhen Double New Technology ManualsElectronicsMicro laser engraving machine

Micro laser engraving machine Production Specifications

1 Comprehensive Introduction

1.1 Product Introduction

DBN Laser engraving machine is a desktop type small laser engraving machine. This device supports mobile power

supply and adapter power supply, supports computer, mobile phone App control engraving. This device is powered by

a 5V/2A adapter to achieve the best printing effect. When using the computer for printing, an outside adapter can be

added to ensure the engraving effect

1.2 Function Introduction

1.2.1 Data Transmission

USB: support type-c USB cable to connect to the computer to transfer data;

Bluetooth: support dual-mode bluetooth connection to transfer printed data;

1.2.2 Engraving and Cutting Function

This machine adopts laser engraving method, which can engrave flat, opaque organic materials without adding flame-

retardant materials, such as wood, ceramic, grey cardboard, bamboo, leather, metal with paint or oxide layer, etc. Can

cut 1-3mm thick wood, cloth, plastic, etc.

The laser head adopts replaceable design. If the laser head is damaged, the user can replace it by himself.

1.2.3 the Laser Focusing

When using the product, if need to carve objects of different thickness, it is necessary to place the objects in the

product working area to manually adjust the focal length for each. For the first operation, it is recommended to use the

wood board or paper card attached to the product for engraving test before use.

The focusing methods are below:

Place the surface of the engraving object horizontally under the engraving machine and manually adjust the focusing

head as shown in figure 1:

Summary of content (6 pages)

PAGE 1
Micro laser engraving machine Production Specifications 1 Comprehensive Introduction 1.1 Product Introduction DBN Laser engraving machine is a desktop type small laser engraving machine. This device supports mobile power supply and adapter power supply, supports computer, mobile phone App control engraving. This device is powered by a 5V/2A adapter to achieve the best printing effect. When using the computer for printing, an outside adapter can be added to ensure the engraving effect 1.
PAGE 2
Observe the ray of light fall to the smallest point on the surface of the object. When the light is rotated to the smallest point, the focal length is adjusted. Note that the smaller the focus adjustment, the more delicate the effect of image tuning, if the focal length is not adjusted well, there may be no engraved image. 1.2.4 Power Supply This model can be powered by USB and DC adapters. USB power supply: USB adapter + type-c cable.
PAGE 3
2 Hardware Introduction 2.1 Hardware Structure ① indicator light panel ②indicator light ③external interface ④shell ⑤main control circuit board ⑥Y axis screw rod ⑦motor ⑧X axis screw rod⑨laser tube ⑩Eye protector stents ⑪rubber foot 2.
PAGE 4
Interface Name 1 Interface Illustration USB1 Power the engraving machine, 5V/2A 2 12V/2A Power the engraving machine, 12V/2A DC Interface 3 2.
PAGE 5
Material can be engraved Material can’t be engraved Organic materials that are flat, opaque and do not add flame retardant materials such as wood, plastic, grey cardboard, bamboo, leather, etc Cannot be burned, e.g.
PAGE 6
Attention 1. This equipment adopts high power laser as the heat emission source. Please do not look directly at the laser head with your eyes, which may cause blindness and other risks. 2. Children under 12 years old are not allowed to operate. If necessary, please operate under the guidance of an adult. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.