Professional UHF Wireless Transmitter POWER OFF 1 | Page CHANNEL LOW HIGH MIC
Transmitter Box · ·1 Antenna · · · R 2 | Page L TAPE-C
Features 1. MIC: 1/8 inch microphone input.Plug in a wired microphone to be mixed with the audio being transmitted. 2. CHANNEL: This button changes the transmitter channel is using. Press to toggle between channel 1, 2, 3, etc. The LED display will show the currently selected channel. Notes: When more than two transmitters are working simultaneously, make sure each transmitter on a different channel. 3. OFF-LO-HI: This switch toggles the transmitter on and selects the power level at which it transmits.
Diagram(I) 4 POWER OFF CHANNEL LOW 5 MIC HIGH 6 R 4 | Page 1 2 3 7 L TYPE-C 8 DC 9V
GettingConnected The transmitter is easily wired into any system, just follow these steps: 1. Attach the antenna to the transmitter (Arrow #1) With this setup, any audio that is fed into the transmitter will be broadcast wirelessly to all headset receivers tuned to the same channel and that are within its operational range. 2. Connect a cable from the Audio Output on the music source to the RCA Audio Input located on the Silent Symphony transmitter. (Diagram pg 6) 3.
Music Source to Transmitter Use RCA to 1/8’Female,connect to 1/8Male to 1/8’Female,then out to Laptop,Phone,Tablet R POWER OFF Page | 6 HIGH TYPE-C DC 9V 1/8 Microphone and Wire Not Included CHANNEL LOW L MIC
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.