Content 1 General Information...................................................................................................................................................... 3 1.1 Profile................................................................................................................................................................................ 3 1.2 Safety Information .....................................................................................................................
3.7 Using the Headset ........................................................................................................................................................... 15 4 Input method ................................................................................................................................................................ 15 4.1 Key for Input Methods .............................................................................................................................
6 Appendix ....................................................................................................................................................................... 28 1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone.
· Set phone password 1.3 Safety warning and Attentions Safety warning ROAD SAFETY COMES FIRST Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal! SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight.
phone near medial apparatuses, such as pacemakers, hearing-aids and some other electronic medical devices, as or may cause interference to such apparatuses. INTERFERENCE The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located below the microphone. Do not touch the antenna area during a conversation, lest that the conversation quality deteriorate.
transmission problems. Some network even do not support the emergency call service Precaution This mobile phone is well designed with fine art. Please exercise special care when using it. The following suggestions will help your mobile phone survive the warranty period and extend its service life: Keep the mobile phone and all its fittings beyond children's reach. Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode electronic circuits.
2 2.1 Your phone Phone overview The phone has many powerful function and good appearance. 2.2 Functions of Keys Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records.if you want to dial a call. End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state.
Press it in standby state to enter the FM, install a earphone first. Number keys, * key and # key Press number keys 0 through 9 to input or edit state to input numbers and characters; In idle screen, you can press left soft key then press * to lock/unlock keypad. Press two times the key * to input "+" in standby interface. When the symbol "+" appears, Press the * key quickly to input "P" or "W","P" and "W" are used for calling the extension; "+" are used for dialing an international call. 2.
3 3.1 Getting started Installing the SIM Cards and the Battery A SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data. Note: After powering off your mobile phone, wait for a few seconds before removing or inserting a SIM card.
SIM cards from being misused. When you are prompted to input any of the codes mentioned below, just input the correct code and then press the OK key. If you input a wrong code, clear it and then input the correct code. Phone lock code The phone lock code may be set to prevent your mobile phone from being misused. In general, this code is provided along with the mobile phone by the manufacturer. The initial phone lock code is set to 1234 by the manufacturer.
The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied with SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times, SIM card will be invalid. Please contact the network operator to replace the SIM card. Barring code A barring code is required for setting the call barring function. You can obtain this code from the network operator to set the call barring function. 3.
Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen. When the battery energy is insufficient, the mobile phone prompts "Battery low". If you have set an alert tone, an alert tone will be given off when the battery level is too low. A charging animation appears when the battery is being charged. When the charging is complete, the animation disappears.
The performance of a battery is subject to multiple factors: radio network configuration, signal strength, ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other application mode you choose to use. To guarantee the optimal performance of your battery, please stick to the following rules: Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused during the charging. Power off the mobile phone before removing the battery.
litter any battery with other rubbish. Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe consequences! 3.4 Powering On/Off the Mobile Phone Hold the End key for a while to power on the mobile phone. A power-on animation appears on the display screen. Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code. The original code is 1234.
and the telephone number, and then press the dial key to dial a call. 3.7 Using the Headset It would enter headset mode automatically when you insert headset to the slot. Make sure of inserting it at the bottom of the slot, or you can’t use it normally. 4 Input method This mobile phone provides English input, smart English input and numeric input method. You can use these input methods when editing the phonebook, short messages, files and greeting text. 4.
number. 4.4 English input and numeric input: The keyboards for English input and numeric input are defined in the following table: Key Character or Function Remarks Number key 1 .
End key Press it to return to the standby interface English input: Each key is used to represent multiple characters. Quickly and continuously press a key till the character you want appears. Input the next character after the cursor moves. Press the # key to switch between input methods To input a blank, switch to the English input mode (in upper or lower case) and then press number key 0. To clear wrong inputs, press the Right soft key. 4.
of the contact you want to search or the first letter(s) of the name. All the contacts meeting the search condition are listed. Press the Up and Down direction keys to browse the contacts and select contact. Press right direction key to view other groups: family, friends, business, classmates and so on. This function enables you to view the internet. Your phone will ask you with existed way. You can start to view only by starting corresponding way.
Rejected Calls You can view the latest rejected calls. Choose rejected calls and then select a rejected call to delete, save, dial, or edit (or send a short message to it). Delete all You can delete all the latest call records. Call timers Choose Call timers to view the last call time, the total time of all dialed calls, the total time of all received calls and the total time of call history or to reset all the time. GPRS counter You can view the data of last sent, last received, all sent and all received.
5.4 Media Camera The phone is provided with a camera, which supports the photographing functions. In the capture interface, roll the phone to align the camera to the picture and then press OK key to capture photos. Pictures will be saved in the file system of the memory card. Video Recorder This function enables you to record dynamic pictures. In the capture interface, press OK key to capture videos clip.
My Photo You can view the pictures in the T-card by this function. Press the direction key to choose them and left soft key edit the pictures. Press right soft key to return last interface. Music You can use this function to play audio files. By pressing the direction key you can control the playing process of audio player: play/pause(OK key), switch to last song/next song (press left or right direction key), fast forward (press and hold right direction key) and rewind (press and hold left direction key).
Write message Access this menu to create a text message. Inbox Received Messages are listed in this menu. Outbox The messages which are sent failed are stored in the Outbox. Drafts Draft messages are listed in this menu. Sentbox Sent messages are listed in this menu. Templates You can create pre-defined messages in this interface. Broadcast message This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecast or road conditions.
Voice mail server You can set voice mail through this function. 5.6 Games There are three games in the list, you can play them for fun, each one can be played five times for free. 5.7 Settings Call Settings Dual-SIM: You can set standby mode, reply by original SIM, set SIM name and set dual SIM call divert through this function. Call divert: this network function enables you to forward incoming calls to another number you have previously specified.
the mobile phone. Hide ID: You can select hide ID, display own ID and or display ID by network. Others: You can set call time minute reminder, auto redial , reply SMS after reject and auto record voice call through this function. Phone settings Date & time:set the time, set the date, Set the date format, the time format and update time settings.
to input the PIN each time you power on the mobile phone. In the case you input a wrong PIN for three consecutive times; you need to input the PIN Unblocking Key (PUK). The PUK is used to unlock and change the locked PIN. To obtain the PUK, contact the network operator. Modify PIN2: To change PIN2 code of PIN code. Phone locked: The function enables you to lock/unlock the phone. Entering password to switch on or off the phone. Password is required when the phone is locked.
Connections Contact the network operator to obtain the following network services: Network account: You can manage network account through this function. GPRS Service: You can select to turn on/off this function. Data connection settings: The default setting is connecting when needed. Network selection: Set Network selection mode to Automatic or Manual. Automatic is recommended.
appointments, etc. Days with events entered will be marked. My files The phone supports the memory card. The capacity of the memory card is selectable. You can use the file manager to conveniently manage various directories and files on the memory card. Choose My files to enter the root directory of the memory. The root directory will list the default folders, new folders and user files.
6 Appendix Appendix 1:Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider. Fault Cause Solution The SIM card Contact your network service provider is damaged. The SIM card is not in Check the SIM card SIM card error position. The metal face of the Clean the SIM card with a clean cloth SIM card is polluted.
Poor received signal quality Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone is not in a service area of the GSM network The battery cannot be charged The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Poor contact Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone Ensure the charger plug is in good contact with
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each phone are performed in positions and locations as required by the FCC. For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body.