User's Manual

K1000+M108+G01UF USER MANUAL
Installation
Fitting Batteries in the Keyboard
1. Turn the keyboard upside down.
2. Remove the battery compartment cove.
3. Insert the one batteries in the battery compartment of the
keyboard .Ensure that the battery poles correspond to the “+”and
“－”markings.
4. Slide the battery compartment cover back on until it locks into place.
Fitting Batteries in the Mouse
1. Turn the mouse upside down
2. Remove the battery compartment cover by putting pressure on the recess
and carefully pushing the cover upwards
3. Insert the two batteries in the battery compartment of the mouse .Ensure
that the battery poles correspond to the “+” and “－” markings.
4. Slide the battery compartment cover back on until it locks into place.
Connecting the Receiver
1. Insert the wireless USB dongle receiver in the USB socket of your PC.
2. Pull out the receiver from the computer, and press the “CONNECT” on
the bottom of the keyboard, the indicator on the front flashes; insert the
receiver into the USB in 15 seconds, when the computer detects the USB
receiver, the keyboard indicator will lights out, then it can work regularly.
If not, please try again.
Trouble Shooting:
1. No connection between the mouse and the receiver.
Re-insert the receiver. Try to insert receiver to another USB port on your
Computer.
2. No any response on the mouse. Take out the battery from the mouse and
Reinstall it with correct, orientation. Try a new battery if necessary.
3. No any response on the Keyboard, Take out the battery from the Keyboard
and reinstall it with correct orientation, Try a new battery if necessary.
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by
the part responsible for compliance could void the user’s authority to operate