Instruction Manual

ManualsBrandsSHENZHEN DAERXIN TECHNOLOGY ManualsElectronicsDigital Enhanced Cordless Telecommunications

INTRODUCTION

Thank you for purchasing our newest DECT single model, the manual is designed to familiarize you with this

phone. To get the maximum use from the phone, we suggest that you read this instruction manual carefully

before using.

Important Notices:

1) Please charge the battery for at least 12 hours before using. You hear a beep when the handset is

correctly in position on the charging cradle.

2) To keep the batteries charged, whenever you don’t need to use the handset (such as overnight, or when

you go out), leave the handset on the charge cradle.

3) When the unit is powered on initially, the date and time will be blinking, please to set the date and time

first according to use the method of

DATE and TIME

SAFETY INSTRUCTION

When using your telephone equipment, the following basic safety precautions should always be followed to

reduce the risk of fire, electric shock and injury to persons:

 Read, understand and follow all warnings and instructions

 Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a soft damp cloth for cleaning.

 Do not place this product on unstable surfaces. The product may drop, causing serious damage to the

product.

 Do not overload wall outlets and extension cords as this can result in fire or electric shock.

 Never push foreign objects of any kind into this product through cabinet slots as they may affect

dangerous voltage points or short circuit parts that could result in fire or electric shock. Never spill liquid

of any kind on the product.

 Avoid moving or disconnecting this unit during a heavy storm, as there may be a remote risk of electric

shock from lightning and thunder.

 IMPORTANT – The base unit must be used with the mains adapter supplied with the unit.

 Using any other adapter will may invalidate any approval given to this apparatus.

 Unprofessional person cannot open the telephone even meets troubles, please send to service center.

FEATURES

 LCD 3 lines display

 Maximum 5 handsets can be registered to the same base unit, and maximum 4 bases per handset

 16 kinds of interface languages: Portuguese, Spanish, English, French, German, Italian, Dutch,

Hungarian, Greek, Polish, Danish, Norwegian, Swedish, Turkish, Russian and Ukrainian

 Pre-dial and edit function

 Redial and pause function

 30 incoming numbers memories and 10 outgoing numbers memories

 50 phone book memories with 12 characters & 20 digits maximum

 Call transfer to other handset and intercom call between two handsets

 Conference call between external call and two handsets

 10 ringing tones for selection

 Ringing tone/earpiece/hands-free volume adjustable

Summary of content (15 pages)

PAGE 1
INTRODUCTION Thank you for purchasing our newest DECT single model, the manual is designed to familiarize you with this phone. To get the maximum use from the phone, we suggest that you read this instruction manual carefully before using. Important Notices: 1) Please charge the battery for at least 12 hours before using. You hear a beep when the handset is correctly in position on the charging cradle.
PAGE 2
 Different melody for different call available  Alarm clock function  Tone/Pulse dialing mode can be set  Flash time 100/300/600/1000ms for selection  LCD backlight function  Auto/manual answering function  Dialing barring function  Keypad lock function  Mute function  In use and charge LED indicator LCD DISPLAY/LCD MAP/KEY PAD DESCRIPTION Icon Function Description The antenna icon will always be shown on the LCD, it indicates for signal strength, ANTENNA flashes when the
PAGE 3
Icon Function Definition Description off hook In standby mode press once to take the handset into off hook mode. hand free In standby mode press once to take the handset to hand free mode. Entry to the menu functions from idle mode; MUNE/OK Confirming selections & actions. In talk mode press the key to perform mute function. OFF/END In talk mode, press once to hang up the call; In standby mode, hold for 3 seconds to power down the handset.
PAGE 4
Scrolling down through lists and menu options; ( ) Decreasing the volume. DOWN Review incoming number, outgoing number and phonebook number. In talk mode press the key to perform mute function. Mute Flash/Delete FL/CLR The key is used to delete memory; Delete the current input by a short pressing during menu edit. In on hook or off hook state, press it to insert a pause time between two RD/P Redial/Pause digits numbers. Redial the last dialed number.
PAGE 5
DELETE HS DIAL MODE BS SETTINGS FLASH TIME MODIFY PIN BS DEFAULT ALARM RING SETUP TONE SETUP HS SETTINGS REGISTRATION LANGUAGE HS NAME AUTO ANSWER BARRING DATE&TIME CONTRAST SELECT BASE HS DEFAULT BASE 1(2,3,4) TONE PULSE 100/300/600/1000MS default 0000 default 0000 ON OFF INT RING EXT RING KEY TONE BATTERY LOW RANGE ALARM ON OFF default 0000 BASE 1,2,3,4 and AUTO default 0000 Handset Menu function 1: CALL LOG Press key, use ∧ or ∨ key to choose CALL LOG, press key to enter.
PAGE 6
name/number  NEW ENTRY Press ∧ or ∨ key to select NEW ENTRY item. This function allows the user to add an entry to the phone book. key to enter, the cursor for the name flashes. 1) Press 2) Enter the name using the alphanumeric keys and press 3) If you make a mistake, press R/CLR key to correct. 4) Enter the number and press 5) Press ∧ or ∨ key to select the melody to be stored and press key to confirm. key to confirm key to confirm.
PAGE 7
select this item. Then you can do below:  DELETE HANDSET This function allows the user to delete a handset registration from the base（Cannot delete local）。 1) Press key, the first show is DELETE HS. 2) Press key to enter, the user will be prompted to enter the PIN code. 3) Input the correct 4-digit pin code using digit key (the default PIN code is 0000）. 4) Press ∧ or ∨ key to scroll the handset names list up and down. 5) Press key to confirm.
PAGE 8
2) Press key to confirm. 3) The user will be prompted to enter the PIN code, the display shows PIN?, then press numerical keys to input code (default as 0000). 4) Press key to confirm. If the PIN code is validated all base settings will be returned to the factory default. Handset Menu function 4: HS SETTINGS The user is able to change a number of the settings for the handset to their own individual preferences. Press key and use ∧ or ∨ key to select HS SETTINGS.
PAGE 9
4) Press key to confirm. 5) Press ∧ or ∨ key to select the MELODY and VOLUME setup. If select MELODY, key to confirm. a) Press b) Press ∧ or ∨ key to select desired melody, the corresponding melody sound can be heard with the selection. c) Press key to confirm your selection. If select VOLUME, key to confirm. a) Press b) Press ∧ or ∨ key to select desired ringer volume 1- 5, the corresponding volume sound can be heard, if you want to switch off select OFF.
PAGE 10
1) Press key. Using ∧ or ∨ key to select HS NAME 2) Press key, and the display will show a flashing cursor on the name line. 3) Key in the handset name. 4) If you make a mistake, press R/CLR key to correct. 5) Press  AUTO ANSWER key to confirm. The Handset can be set to answer an incoming call automatically by simply pick it up from the charging cradle. The user is able to select to enable/disable this auto answer feature. 1) Press key.
PAGE 11
base you want the handset to operate with. 1) Press key, then using ∧ or ∨ key to choose SELECT BASE. 2) Press key and the LCD displays BASE 1 3) Press ∧ or ∨ to select base (BASE 1~4) or AUTO.(Note: the handset will only link with base number +. followed by a “+”) 4) to begin searching, if you hear a sound of “di-du-di”, means linked successful. Press Note: If you select “AUTO”, the handset will link with the first of the registered bases that it finds.
PAGE 12
 TYPE I After you have applied the caller ID service, you can see the caller party phone number during an incoming ring.  TYPE II During the conversation, the phone number of the incoming call of the third party can be seen in the unit. This function can be worked when the user applied the Telecom service. Flash The flash function of FL/CLR key can support some special network service, such as call waiting, call transfer, etc.
PAGE 13
 Three-way conference call 1) When a call comes, Press (HS1) 2) Then press (HS1) 3) Press (HS2) 4) Press (HS1) then the 5) Press or key key once. The destination handset will ring. or key to accept call. key then you can talk all together. to quit the three-way conference mode, then other parties can also continue to communication. If you have more than two handsets registered with one base, operation it by the follow ways:  Intercom key.
PAGE 14
 The charging contacts are dirty. Disconnect the power adaptor first and clean the contact with proper damp cloth.  The handset on the charger does not charge  Make sure the batteries are inserted correctly.  Make sure the handset is placed properly on the base station/ charger  Batteries are defective. Purchase new ones for replace.
PAGE 15
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.