Quick Guide

ManualsBrandsSHENZHEN CYTON Intelligence Technology ManualsCamera & PhotoWireless Smart Battery Camera

QUICK GUIDE

ORIGINALITY DESIGN SMART - AND BEAUTIFUL

BATTERY CAM

DX2

Model: DX2

Product name: Wireless Smart Battery Camera

Company: SHENZHEN CYTON Intelligence Technology CO.,LTD

Address: F/L 601, Building K, Jinchangda, No. 2000089, Shangwei industrial

zone ,Zhangkengjing community,Guanhu Town,Longhua New District,

Shenzhen, Guangdong Province, China

Summary of content (8 pages)

PAGE 1
DX2 ORIGINALITY DESIGN SMART - AND BEAUTIFUL BATTERY CAM QUICK GUIDE Model: DX2 Product name: Wireless Smart Battery Camera Company: SHENZHEN CYTON Intelligence Technology CO.,LTD Address: F/L 601, Building K, Jinchangda, No.
PAGE 2
wi-fi antenna Micro-USB port Indicator light Speaker Lens White light(Max 800Lux) Microphone PIR Power port DC 5 V ±5% Power on/off Press the button for 3 seconds to turn on/off the camera Status light Solid red light on: the camera is malfunctional Blinking red light: wait for network connection (slowly) connecting the network (quickly) Blinking blue light: currently connecting Solid blue light on: the camera is working correctly SD card slot Cloud storage, local Micro SD card (up to 128 GB) Rese
PAGE 3
Install 1. Fixed bracket： Fix the camera to the desired location. You can directly place the camera on a flat surface or fix the bracket to the wall or ceiling by screws. 2. fixed camera： Put the camera up side down and then fix the camera to the bracket by a screw .
PAGE 4
Connect Download CloudEdge is available for both iOS and Android OS. Search the name 'CloudEdge'in App Store or Google Play, or scan the QR-Code to download the App. ·Support ipad IOS Android Download App(IOS&android) Add device Log in the CloudEdge, select "Add Device", and add the smart camera to the App according to the screen tips(Make the smart camera close to the router when configuring).
PAGE 5
FAQ Q: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. Q: Why is it still in the list of devices after reseting? A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
PAGE 6
Functions Remote wake-up The camera will be in a sleep mode to save power; you can have a preview in App. Full-duplex audio You can see and hear the vistor in your App from the camera. PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm When the battery power is lower than your set, the App will send a notification to your mobile phone. Record Using SD card or opening the Cloud-Storage Service, to keep recording for every moment.
PAGE 7
FCC radiatttnn norm FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation.
PAGE 8
FCC radiatttnn norm —Reorient or relocate the receiving antenna. —Increase the separation between the equipmentand receiver. —Connect the equipment into an outlet on acircuit different from that to which the receiveris connected. —Consult the dealer or an experienced radio/TV technician for help. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.